Shop

Default sorting
Show
16

  • Specification:

    • Stable Transmission
    • 100% pass fluke test
    • Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the cable.
    • Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network expansion.
    • Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
    • Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

     

    CAT6 FTP Patch Cord

    Catagory
    CAT6

    Shieled
    YES

    Conductor Material
    Stranded Bare Copper

    Cable AWG
    26

    Construction(±0.01mm)
    7/0.16

    Connector
    8P8C FTP plug; 3μm gold plating

     

    Insulation
    Material
    PE

    Nom. Thickness(mm)
    0.21

    Diameter(±0.05mm)
    0.9

     

     

    Jacket
    Material
    PVC

    Nom. Thickness(mm)
    0.55

    Diameter(±0.30mm)
    6

    Color
    Light gray

    ELECTRICAL TEST
    100% OPEN,SHORT & MISS WIRE TEST

    CONDUCTOR RESISTANCE
    3~10 OHMS MAX.

    INSULATOR RESISTANCE
    5M OHMS MIN.

    HI-POT
    DC 300V 0.01sec

    Length
    0.5M/1M/2M(or customized lenghth)

    CAT6 F/UTP Patch Cord

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 UTP Patch panel

    Shielded
    NO

    Port
    24-port

    Unit
    1U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure (not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Back wave loss
    ≧34dB (1≦f<100MHZ)

    Relative humidity
    85% (30℃)

    Min near end cros talk loss 100MHZ
    ≧43dB (100MHZ)

    Min far end cros talk loss 100MHZ
    ≧35.3dB (100MHZ)

    Operation temperature
    -20℃ to 60℃

     

    CAT6 U/UTP Patch Panel 24 Ports 1U

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 UTP Patch panel

    Shielded
    NO

    Port
    48-port

    Unit
    2U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure(not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Back wave loss
    ≧34dB (1≦f<100MHZ)

    Relative humidity
    85% (30℃)

    Min near end cros talk loss 100MHZ
    ≧43dB (100MHZ)

    Min far end cros talk loss 100MHZ
    ≧35.3dB (100MHZ)

    Operation temperature
    -20℃ to 60℃

    CAT6 U/UTP Patch Panel 48 Ports 2U

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 FTP Patch panel

    Shielded
    Yes

    Port
    24-port

    Unit
    1U

    Material
    –  Panel: 1.2mm SPCC with black color painting

    –  RJ45 Housing: PC

    –  RJ45 Contatt material and finished:

    Phosphor Bronze with 50-60 micro-inh Nickel plated Contact area: 3 micro-inch gold plating

    –  IDC house: PC, UL 94V-2 Krone

    –  IDC terminal material and finishing: phosphor bronze with 50 micro-inch tin-lead plated; over 50-60 micro inch nikel plating

    –  PCB: FR4 UL94VO

    IDC Accept
    22-26 AWG Stranded and solid wire

    Retention strength
    7.7 kgs between jack and plug

    Insertion force
    900 grms for 8 contacts

    Durability
    Jack: 750 cycles plug-jack mating and unmating test Inseration cycles at 20 cycles/min max.

    Contact resistance test per 100 cycles IDC: Max. 200 punching time

    Operating temperature
    -40~+70 °C

    CAT6 F/UTP Patch Panel 24 Ports 1U

  • Specification:

    • With Cat5e keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT5E UTP Patch panel

    Shielded
    NO

    Port
    48-port

    Unit
    2U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure (not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Relative humidity
    85% (30℃)

    Operation temperature
    -20℃ to 60℃

    CAT5E U/UTP Patch Panel 48 Ports 2U

  • MODEL
    Winner Pro+ 1KR(L)

    PHASE
    Single phase with ground

    CAPACITY *
    1000 VA / 900 W

    INPUT

    Nominal Voltage
    110/115/120/127VAC or 208/220/230/240VAC

    Input Voltage Range
    60-145 VAC or 120-300 VAC (Based on load at 50%)
    90-145 VAC or 180-300 VAC (Based on load at 100%)

    Frequency Range
    40 Hz ~ 70 Hz

    Power Factor
    0.99 @ Nominall Voltage (100% load)

    OUTPUT

    Output Voltage
    110/115/120/127VAC or 208/220/230/240VAC

    Voltage Regulation
    ± 1 %

    Frequency Range (Synchronized Range)
    47~ 53 Hz or 57 ~ 63 Hz

    Frequency Range (Batt. Mode)
    50 Hz or 60 Hz ± 0.5%

    Current Crest Ratio
    3:1

    Harmonic Distortion
    3% THD (Linear Load)
    6% THD (Non-linear Load)

    Transfer Time
    AC Mode to Battery Mode
    Zero

    Inverter to Bypass
    4 ms (Typical)

    Waveform (Batt. Mode)
    Pure Sinewave

    EFFICIENCY

    AC Mode
    88%

    Battery Mode
    83%

    BATTERY

    Standard Model
    Battery Type
    12 V / 9 Ah

    Numbers
    2
    3

    Typical Recharge Ti me
    4 hours recover to 90% capacity

    Charging Current ( max.)
    1A

    Charging Voltage
    27.4VDC ± 1%
    41.0VDC ± 1%

    Battery Type
    Depending on applications

    Numbers
    3

    Long-run Model **
    Charging Current ( max.)
    1.0A/2.0A/4.0A/6.0 A

    Charging Voltage
    41.0 VDC ±1%

    INDICATORS

    LCD
    Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators

    ALARM

    Battery Mode
    Sounding every 4 seconds

    Low Battery
    Sounding every second

    Overload
    Sounding twice every second

    Fault
    Continuously sounding

    PHYSICAL

    Standard Model
    Dimension, D x W x H (mm)
    310 x 438 x 88
    410 x 438 x 88

    Net Weight (kgs)
    12
    14.1

    Long-run Model **
    Dimension, D x W x H (mm)
    310 x 438 x 88

    Net Weight (kgs)
    9

    ENVIRONMENT

    Humi dity
    20-90 % RH @ 0- 40°C (No n-condensing)

    Noise Level
    Less than 50dB @ 1 Meter

    MANAGEMENT

    S mart RS-232 / USB
    Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux and MAC

    Optional SNMP
    Power management from SNMP manager and web browser

    Winner Pro Plus Rack 1KR UPS

  • MODEL
    Winner Pro+ 2KR(L)

    PHASE
    Single phase with ground

    CAPACITY *
    2000 VA / 1800 W

    INPUT

    Nominal Voltage
    110/115/120/127VAC or 208/220/230/240VAC

    Input Voltage Range
    60-145 VAC or 120-300 VAC (Based on load at 50%)
    90-145 VAC or 180-300 VAC (Based on load at 100%)

    Frequency Range
    40 Hz ~ 70 Hz

    Power Factor
    0.99 @ Nominall Voltage (100% load)

    OUTPUT

    Output Voltage
    110/115/120/127VAC or 208/220/230/240VAC

    Voltage Regulation
    ± 1 %

    Frequency Range (Synchronized Range)
    47~ 53 Hz or 57 ~ 63 Hz

    Frequency Range (Batt. Mode)
    50 Hz or 60 Hz ± 0.5%

    Current Crest Ratio
    3:1

    Harmonic Distortion
    3% THD (Linear Load)
    6% THD (Non-linear Load)

    Transfer Time
    AC Mode to Battery Mode
    Zero

    Inverter to Bypass
    4 ms (Typical)

    Waveform (Batt. Mode)
    Pure Sinewave

    EFFICIENCY

    AC Mode
    89%

    Battery Mode
    87%

    BATTERY

    Standard Model
    Battery Type
    12 V / 9 Ah

    Numbers
    4

    Typical Recharge Ti me
    4 hours recover to 90% capacity

    Charging Current ( max.)
    1A

    Charging Voltage
    54.7 VDC ±1%

    Long-run Model **
    Battery Type
    Depending on applications

    Numbers
    6

    Charging Current ( max.)
    1.0A/2.0A/4.0A/6.0 A

    Charging Voltage
    82.1 VDC ±1%

    INDICATORS

    LCD
    Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators

    ALARM

    Battery Mode
    Sounding every 4 seconds

    Low Battery
    Sounding every second

    Overload
    Sounding twice every second

    Fault
    Continuously sounding

    PHYSICAL

    Standard Model
    Dimension, D x W x H (mm)
    410 x 438 x 88

    Net Weight (kgs)
    19

    Long-run Model **
    Dimension, D x W x H (mm)
    410 x 438 x 88

    Net Weight (kgs)
    12

    ENVIRONMENT

    Humi dity
    20-90 % RH @ 0- 40°C (No n-condensing)

    Noise Level
    Less than 50dB @ 1 Meter

    MANAGEMENT

    S mart RS-232 / USB
    Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux and MAC

    Optional SNMP
    Power management from SNMP manager and web browser

    Winner Pro Plus Rack 2KR UPS

  • MODEL
    Winner Pro+ 10KR (L)

    PHASE
    Single phase with ground

    CAPACITY *
    10000 VA / 9000 W

    INPUT

    Nominal Voltage
    208/220/230/240VAC

    Input Voltage Range
    110-300 VAC (Based on load at 50%)
    176-300 VAC (Based on load at 100%)

    Frequency Range
    46~54 Hz or 56~64 Hz

    Power Factor
    0.99 @ Nominall Voltage (100% load)

    OUTPUT

    Output Voltage
    208/220/230/240VAC

    Voltage Regulation
    ± 1 %

    Frequency Range (Synchronized Range)
    46 Hz ~ 54 Hz or 56 Hz ~ 64 Hz

    Frequency Range (Batt. Mode)
    50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz

    Current Crest Ratio
    3:1

    Harmonic Distortion
    3% THD (Linear Load)
    5% THD (Non-linear Load)

    Transfer Time
    AC Mode to Battery Mode
    0 ms

    Inverter to Bypass
    0 ms

    Waveform (Batt. Mode)
    Pure Sinewave

    EFFICIENCY

    AC Mode
    93%

    Battery Mode
    91%

    BATTERY

    Standard Model
    Battery Type
    12 V / 9 Ah

    Numbers
    16
    20

    Typical Recharge Time
    9 hours recover to 90% capacity

    Charging Current ( max.)
    1A/2A (Adjustable)

    Charging Voltage
    218.4 VDC±1%
    273VDC ±1%

    Long-run Model **
    Battery Type
    Depending on applications

    Numbers
    16 ~ 20 ( Adjustable)

    Charging Current ( max.)
    1A/2A/4A/6A (Adjustable, 6A is only available for 16 pcs batteries)

    Charging Voltage
    218.4 VDC ± 1% (Based on 16 pcs batteries)

    INDICATORS

    LCD
    Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators

    ALARM

    Battery Mode
    Sounding every 4 seconds

    Low Battery
    Sounding every second

    Overload
    Sounding twice every second

    Fault
    Continuously sounding

    PHYSICAL

    Standard Model
    Dimension, D x W x H (mm)
    UPS Unit: 580x438x133[3U]
    Battery Pack: 580x438x133 [3U]

    Net Weight (kgs)
    UPS Unit: 18
    Battery Pack: 51
    UPS Unit: 18
    Battery Pack: 61

    Long-run Model **
    Dimension, D x W x H (mm)
    580 x 438 x 133[3U]

    Net Weight (kgs)
    18

    ENVIRONMENT

    Humi dity
    0-95% RH @ 0-40°C (non-condensing)

    Noise Level
    Less than 55dB @ 1 Meter
    Less than 58dB @ 1 Meter

    MANAGEMENT

    S mart RS-232 / USB
    Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8/10, Linux and MAC

    Optional SNMP
    Power management from SNMP manager and web browser

    Winner Pro Plus Rack 10KR UPS

  • MODEL
    Apex 600

    CAPACITY
    600 VA / 360 W

    INPUT

    Voltage
    110/120 VAC or 220/230/240 VAC

    Voltage Range
    81-145 VAC / 162-290 VAC

    Frequency Range
    60/50 Hz (Auto sensing)

    OUTPUT

    Output Voltage
    110/120 VAC or 220/230/240 VAC

    AC Voltage Regulation (Batt. Mode)
    ± 10%

    Frequency Range (Batt. Mode)
    50 Hz or 60 Hz ± 1 Hz

    Transfer Time
    Typical 2-6 ms

    Waveform (Batt. Mode)
    Simulated Sinewave

    BATTERY

    Battery Type & Number
    12 V/7 Ah x 1

    Typical Recharge Time
    4 hours recover to 90% capacity

    PROTECTION

    Full Protection
    Overload, discharge, and overcharge protection

    INDICATORS

    LCD Model
    Input voltage, output voltage, battery capacity, load level and UPS status

    LED Model
    AC Mode
    Green lighting

    Battery Mode
    Green flashing

    Fault
    N/A

    ALARM

    Battery Mode
    Sounding every 10 seconds

    Low Battery
    Sounding every second

    Overload
    Sounding every 0.5 second

    Fault
    Continuously sounding

    PHYSICAL

    LED Model
    Dimension, D x W x H (mm)
    279 x 101 x 142

    Net Weight (kgs)
    4.2

    LCD Model
    Dimension, D x W x H (mm)
    300 x 101 x 142

    Net Weight (kgs)
    4.4

    ENVIRONMENT

    Humidity
    0-90 % RH @ 0- 40°C (Non-condensing)

    Noise Level
    Less than 40dB

    APEX 600VA-3 LED UPS

  • MODEL
    Apex 800

    CAPACITY
    800 VA / 480 W

    INPUT

    Voltage
    110/120 VAC or 220/230/240 VAC

    Voltage Range
    81-145 VAC / 162-290 VAC

    Frequency Range
    60/50 Hz (Auto sensing)

    OUTPUT

    Output Voltage
    110/120 VAC or 220/230/240 VAC

    AC Voltage Regulation (Batt. Mode)
    ± 10%

    Frequency Range (Batt. Mode)
    50 Hz or 60 Hz ± 1 Hz

    Transfer Time
    Typical 2-6 ms

    Waveform (Batt. Mode)
    Simulated Sinewave

    BATTERY

    Battery Type & Number
    12 V/9 Ah x 1

    Typical Recharge Time
    4 hours recover to 90% capacity

    PROTECTION

    Full Protection
    Overload, discharge, and overcharge protection

    INDICATORS

    LCD Model
    Input voltage, output voltage, battery capacity, load level and UPS status

    LED Model
    AC Mode
    Green lighting

    Battery Mode
    Green flashing

    Fault
    N/A

    ALARM

    Battery Mode
    Sounding every 10 seconds

    Low Battery
    Sounding every second

    Overload
    Sounding every 0.5 second

    Fault
    Continuously sounding

    PHYSICAL

    LED Model
    Dimension, D x W x H (mm)
    279 x 101 x 142

    Net Weight (kgs)
    4.9

    LCD Model
    Dimension, D x W x H (mm)
    300 x 101 x 142

    Net Weight (kgs)
    5.0

    ENVIRONMENT

    Humidity
    0-90 % RH @ 0- 40°C (Non-condensing)

    Noise Level
    Less than 40dB

    APEX 800VA -3 LED UPS

  • MODEL
    Apex 1.5K

    CAPACITY
    1500 VA / 900 W

    INPUT

    Voltage
    110/120 VAC or 220/230/240 VAC

    Voltage Range
    81-145 VAC / 162-290 VAC

    Frequency Range
    60/50 Hz (Auto sensing)

    OUTPUT

    Output Voltage
    110/120 VAC or 220/230/240 VAC

    AC Voltage Regulation (Batt. Mode)
    ± 10%

    Frequency Range (Batt. Mode)
    50 Hz or 60 Hz ± 1 Hz

    Transfer Time
    Typical 2-6 ms

    Waveform (Batt. Mode)
    Simulated Sinewave

    BATTERY

    Battery Type & Number
    12 V/9 Ah x 2

    Typical Recharge Time
    4-6 hours recover to 90% capacity

    PROTECTION

    Full Protection
    Overload, discharge, and overcharge protection

    INDICATORS

    LCD Model
    Input voltage, output voltage, battery capacity, load level and UPS status

    LED Model
    AC Mode
    Green lighting

    Battery Mode
    Yellow flashing

    Fault
    Red lighting

    ALARM

    Battery Mode
    Sounding every 10 seconds

    Low Battery
    Sounding every second

    Overload
    Sounding every 0.5 second

    Fault
    Continuously sounding

    PHYSICAL

    LED Model
    Dimension, D x W x H (mm)
    320 x 130 x 182

    Net Weight (kgs)
    10.6

    LCD Model
    Dimension, D x W x H (mm)
    320 x 130 x 182

    Net Weight (kgs)
    10.6

    ENVIRONMENT

    Humidity
    0-90 % RH @ 0- 40°C (Non-condensing)

    Noise Level
    Less than 40dB

    APEX 1500VA – 3 LED UPS

  •  

    General Features

    Welded monoblock body – 1.50mm Vertical opening door with one point locking, 27° and 90° steps. There are also 2 lock options with different passwords. Ventilation holes for passive cooling inside the box In-lid mounting capability for 19” DVR device Adjustable fixing plates for device mounting Rubber fixing gaskets that prevent damage to the device by applying pressure on the device during the opening and closing of the cover. Movable mounting plate for 12” display mounting on rear wall variation by model 5 different cable entry points on the body: top, bottom, left, right and rear wall. 1U mounting bracket for mounting 10” Socket module in the upper part of the body. Robust and fine-textured Electrostatic Powder Paint application 90 micron. Maximum loading capacity : 50 kg

     

     

     

     

    Product code
    Product Description W=580 D=550 mm
    Dimensions (W*H*D)
    Product Kg

    MT.DV1U5855150.C0
    Security cabinet for 1U DVR Video System
    580x550x150 mm
    18 kg

    MT.DV2U5855150.C0
    Security cabinet for 2U DVR Video System Security cabinet & Monitor
    580x550x200 mm
    20 kg

    MT.DV1U5855150M.C0
    mount front cover for 1U DVR Video System Security cabinet & Monitor
    580x550x150 mm
    19 kg

    MT.DV2U5855150M.C0
    mount front cover for 2U DVR Video System
    580x550x200 mm
    21 kg

     

     

    RACK 19” for DVR and MONITOR 580×550

  • Standard:

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2,

    DIN41494 part 7, GBIT3047.2-92 standard.

    Feature:

    19 inch width standard;

    Removevable Side Panels, side locks;

    Knock off hole for entering cable on both top cover, bottom panel, rear panel

    Turning angle of front door is over 180 degrees

    Easy mounting installation

    Unassembled package saving shipping space

    fan, shelf, PDU are optional

    Loading Capacity:

    80 KG

    Degree of Protection:

    IP20

    Material:

    SPCC Cold Rolled Steel

    Thickness: 2.0mm-1.2 mm-1.0mm

    Surface Finish:

    Powder coating

     

     

     

    Specification
    Quantity
    Unit
    Material
    Surface Finish
    Remark

    Frame
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Side panel
    2
    Piece
    SPCC cold rolled steel
    Powder coated

    Top cover
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Bottom panel
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Mounting profile
    4
    Piece
    SPCC cold rolled steel
    Powder coated
    U mark

    Front door
    1
    Piece
    5MM toughened glass door/SPCC
    Powder coated

    Lock
    1
    Piece

    with 2 keys

    M6 Square nut
    12
    Piece
    Steel
    Color Zinc

    M6 B-head screw
    12
    Piece
    Steel
    Color Zinc

    Allen wrench
    1
    Piece
    Steel
    Color Zinc

    Rack Cabinet 4U 540x400MM no fan no shelf

  • Standard:

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2,

    DIN41494 part 7, GBIT3047.2-92 standard.

    Feature:

    19 inch width standard;

    Removevable Side Panels, side locks;

    Knock off hole for entering cable on both top cover, bottom panel, rear panel

    Turning angle of front door is over 180 degrees

    Easy mounting installation

    Unassembled package saving shipping space

    fan, shelf, PDU are optional

    Loading Capacity:

    80 KG

    Degree of Protection:

    IP20

    Material:

    SPCC Cold Rolled Steel

    Thickness: 2.0mm-1.2 mm-1.0mm

    Surface Finish:

    Powder coating

     

    Specification
    Quantity
    Unit
    Material
    Surface Finish
    Remark

    Frame
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Side panel
    2
    Piece
    SPCC cold rolled steel
    Powder coated

    Top cover
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Bottom panel
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Mounting profile
    4
    Piece
    SPCC cold rolled steel
    Powder coated
    U mark

    Front door
    1
    Piece
    5MM toughened glass door/SPCC
    Powder coated

    Lock
    1
    Piece

    with 2 keys

    M6 Square nut
    12
    Piece
    Steel
    Color Zinc

    M6 B-head screw
    12
    Piece
    Steel
    Color Zinc

    Allen wrench
    1
    Piece
    Steel
    Color Zinc

    Rack Cabinet 6U 530×400 with 1 shelf

  • Standard:

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2,

    DIN41494 part 7, GBIT3047.2-92 standard.

    Feature:

    19 inch width standard;

    Removevable Side Panels, side locks;

    Knock off hole for entering cable on both top cover, bottom panel, rear panel

    Turning angle of front door is over 180 degrees

    Easy mounting installation

    Unassembled package saving shipping space

    fan, shelf, PDU are optional

    Loading Capacity:

    80 KG

    Degree of Protection:

    IP20

    Material:

    SPCC Cold Rolled Steel

    Thickness: 2.0mm-1.2 mm-1.0mm

    Surface Finish:

    Powder coating

     

    Specification
    Quantity
    Unit
    Material
    Surface Finish
    Remark

    Frame
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Side panel
    2
    Piece
    SPCC cold rolled steel
    Powder coated

    Top cover
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Bottom panel
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Mounting profile
    4
    Piece
    SPCC cold rolled steel
    Powder coated
    U mark

    Front door
    1
    Piece
    5MM toughened glass door/SPCC
    Powder coated

    Lock
    1
    Piece

    with 2 keys

    M6 Square nut
    12
    Piece
    Steel
    Color Zinc

    M6 B-head screw
    12
    Piece
    Steel
    Color Zinc

    Allen wrench
    1
    Piece
    Steel
    Color Zinc

    Rack Cabinet 9U 600×450 mm no Fan no Shelf

  • Standard:

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2,

    DIN41494 part 7, GBIT3047.2-92 standard.

    Feature:

    19 inch width standard;

    Removevable Side Panels, side locks;

    Knock off hole for entering cable on both top cover, bottom panel, rear panel

    Turning angle of front door is over 180 degrees

    Easy mounting installation

    Unassembled package saving shipping space

    fan, shelf, PDU are optional

    Loading Capacity:

    80 KG

    Degree of Protection:

    IP20

    Material:

    SPCC Cold Rolled Steel

    Thickness: 2.0mm-1.2 mm-1.0mm

    Surface Finish:

    Powder coating

     

    Specification
    Quantity
    Unit
    Material
    Surface Finish
    Remark

    Frame
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Side panel
    2
    Piece
    SPCC cold rolled steel
    Powder coated

    Top cover
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Bottom panel
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Mounting profile
    4
    Piece
    SPCC cold rolled steel
    Powder coated
    U mark

    Front door
    1
    Piece
    5MM toughened glass door/SPCC
    Powder coated

    Lock
    1
    Piece

    with 2 keys

    M6 Square nut
    12
    Piece
    Steel
    Color Zinc

    M6 B-head screw
    12
    Piece
    Steel
    Color Zinc

    Allen wrench
    1
    Piece
    Steel
    Color Zinc

    Rack Cabinet 12U 600x600mm no Fan no Shelf