Shop

Default sorting
Show
16

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 UTP Patch panel

    Shielded
    NO

    Port
    48-port

    Unit
    2U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure(not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Back wave loss
    ≧34dB (1≦f<100MHZ)

    Relative humidity
    85% (30℃)

    Min near end cros talk loss 100MHZ
    ≧43dB (100MHZ)

    Min far end cros talk loss 100MHZ
    ≧35.3dB (100MHZ)

    Operation temperature
    -20℃ to 60℃

    CAT6 U/UTP Patch Panel 48 Ports 2U

  • This EZ-RJ45 connector allows the technician to easily verify the proper wiring order, allowing the wires to be inserted through the connector and out the front.

    • Stable transmission
    • Environmentally friendly PC material
    • 3μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6 UTP EZ RJ45 Connector

    • Stable transmission
    • Environmentally friendly PC material
    • 3μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6 UTP JACK RJ45 Connector

  • Description

    • Stable transmission
    • Environmentally friendly PC material
    • 50μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6/CAT7 RJ45 FTP Connector for 22-23 AWG

    • Impendance: 75+/-3 Ohm
    • Capacity: 55+/-3 pF/m
    • Velocity ratio: 80 %
    • DC resistance (20 ºC) Conductor: 63,1 Ohm/km
      Outer shield: 40,6 Ohm/km
    • Attenuation (20 ºC): 5 MHz 2,62 dB/100 m
      50 MHz 8,40 dB/100 m
      200 MHz 16,87 dB/100 m
      470 MHz 25,97 dB/100 m
      500 MHz 26,80 dB/100 m
      862 MHz 35,32 dB/100 m
      1000 MHz 38,09 dB/100 m
    • Return loss at: 30-470 MHz dB >20
      470-862 MHz dB >23
      862-2150 MHz dB  >18
    • Screening efficiency: 5-10 MHz dB >70
      10-30 MHz dB >80
      30-1000 MHz dB >85

    CCTV Cable 1+2 Mini U4 2×0,50 500M

    • Impendance: 75+/-3 Ohm
    • Capacity: 55+/-3 pF/m
    • Velocity ratio: 80 %
    • DC resistance (20 ºC) Conductor: 63,1 Ohm/km
      Outer shield: 40,6 Ohm/km
    • Attenuation (20 ºC): 5 MHz 2,62 dB/100 m
      50 MHz 8,40 dB/100 m
      200 MHz 16,87 dB/100 m
      470 MHz 25,97 dB/100 m
      500 MHz 26,80 dB/100 m
      862 MHz 35,32 dB/100 m
      1000 MHz 38,09 dB/100 m
    • Return loss at: 30-470 MHz dB >20
      470-862 MHz dB >23
      862-2150 MHz dB  >18
    • Screening efficiency: 5-10 MHz dB >70
      10-30 MHz dB >80
      30-1000 MHz dB >85

    CCTV Cable 1+4 Mini U4 2×0,50 500M

  • Electric parameters:

    Impedance

    Ohm
    75+/-3

    Capacity

    pF/m
    54.5+/-3

    Velocity ratio

    %
    85

    DC resistance (20 ºC)
    Conductor
    Ohm/km
    35.5

    Outer shield
    Ohm/km
    31

    Attenuation (20 ºC)
    1 MHz
    db/100 m
    0.87

    5 MHz
    db/100 m
    1.98

    10 MHz
    db/100 m
    2.79

    50 MHz
    db/100 m
    6.25

    100 MHz
    db/100 m
    8.91

    200 MHz
    db/100 m
    12.9

    300 MHz
    db/100 m
    15.83

    470 MHz
    db/100 m
    19.41

    862 MHz
    db/100 m
    26.14

    1000 MHz
    db/100 m
    28.92

    1350 MHz
    db/100 m

    1750 MHz
    db/100 m

    2150 MHz
    db/100 m

    Return loss at
    30-470 MHz
    db
    >23

    470-862 MHz
    db
    >20

    682-2150 MHz
    db
    >18

    Screening efficiency
    5-10 MHz
    db
    >55

    10-30 MHz
    db
    >60

    30-1000 MHz
    db
    >65

    Construction:

    Material conductor

    Bare copper

    Diameter conductor
    mm
    0.8

    Material dielectric

    FHDPE

    Diameter dielectric
    mm
    3,7±0,15

    Typf of foil

    Al/Pet/Al

    Braiding material

    AM (aluminium)

    Braid coverage
    %
    67

    Power wires

    Copper (2 x 0,75 mm2)

    Outer jacket

    PVC

    Diameter sheath
    mm
    6.1/12.0

    Min. Setting radius
    mm
    35

    CCTV Cable RG59 1+2 2×0,75 outdoor 500m

  • Coaxial Cable RG6/U6 indoor 500m/100m

  • Electric parameters:

    Impendance

    Ohm
    75+/-2

    Capacity

    pF/m
    54,5+/-3

    Velocity ratio

    %
    85

    DC resistance (20 ºC)
    Conductor
    Ohm/km
    22,5

    Outer shield
    Ohm/km
    24,0

    Attenuation (20 ºC)
    1 MHz
    dB/100 m
    0,68

    5 MHz
    dB/100 m
    1,53

    10 MHz
    dB/100 m
    2,17

    50 MHz
    dB/100 m
    4,85

    100 MHz
    dB/100 m
    6,87

    200 MHz
    dB/100 m
    9,74

    300 MHz
    dB/100 m
    11,95

    470 MHz
    dB/100 m
    14,98

    862 MHz
    dB/100 m
    20,37

    1000 MHz
    dB/100 m
    21,97

    1350 MHz
    dB/100 m

    1750 MHz
    dB/100 m

    2150 MHz
    dB/100 m

    Return loss at
    30-470 MHz
    dB
    >23

    470-862 MHz
    dB
    >20

    862-2150 MHz dB
    dB
    >18

    Screening efficiency
    5-10 MHz dB
    dB
    >75

    10-30 MHz dB
    dB
    >85

    30-1000 MHz dB
    dB
    >90

     

    Construction:

    Material conductor

    Bare copper

    Diameter conductor
    Ø
    mm
    1,02

    Material dielectric

    FHDPE

    Diameter dielectric
    Ø
    mm
    4,3±0,15

    Type of foil

    Al/Pet/Al

    Braiding material

    Annealed tinned copper

    Braid coverage

    %
    60

    Power wires

    Copper (2 x 0,75 mm2)

    Outer jacket

    PVC

    Diameter sheath
    Ø
    mm
    6,8/15,6

    Min. Setting radius

    mm
    50

    Coaxial Cable RG6/U6 Outdoor

  • Rating
    220V-240V,22/23W

    Current
    0.14A

    RPM
    2800/3000R/MIN

    Size
    120X120X38MM

    Noise
    48/50dB-A

    Hz
    50/60Hz

    Material:
    Frame: metal

    fan blade: PPT plastic

    Wire: copper

    Cooling Fan 220V

  • The horizontal cable management can be used with all patch panels, rack and cabinet mount products. It mounts on standard 19″ racks

    or cabinets and provided a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.

    Covered Cable Organizer 12 Port

  • The horizontal cable management can be used with all patch panels, rack and cabinet mount products. It mounts on standard 19″ racks

    or cabinets and provided a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.

    Covered Cable Organizer 24 Port

  • Big scan window

    Strong decoding capacity

    Quickly identify various barcodes

     

    Features

    • Support USB, RS-232 interface
    • Suitable for POS terminals, ticket validators
    • Wide field-of-view, omni-directional scanning capability
    • Hight speed and reliable performance on common codes
    • Compatible with Linux, Android, Windows XP/7/8/10/MAC OS

    DS-652SU Desktop Scanner

  • Fiber Optic Cable 50/125 outdoor Multi Mode

  • Technical characteristics

    1) The unique extruding technology provides the fibers in the tube with good flexibility and bending endurance

    2) The unique fiber excess length control method provides the cable with excellent mechanical and environmental properties Multiple water blocking material filling provides dual water blocking function

    Construction:

    1. Fiber single mode G652D
    2. Gel core filling
    3. Center strength member FRP
    4. Multi Loose tube
    5. Fastening winding of threads and tapes.
    6. 0MM*7pcs Stranded galvanize messenger wire
    7. MDPE sheath

     

    Fiber count
    12
    24
    48
    96

    No of loose tube/filler
    2/3
    4/1
    6
    8

    Fiber No. per tube
    6
    6
    8
    12

    Loose tube diameter
    1.6±0.1mm

    Center strength member
    Steel wire 1.6±0.1mm

    Outer sheath thickness
    1.5±0.1mm

    Messenger wire
    1.0MM*7pcs galvanized steel

    Water proof type
    Gel filled

    Outer sheath material
    MDPE

    Cable OD mm
    8.0*15.0MM±0.2mm

    Cable weight
    110KG/KM

    Tensile
    4KN

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40 ℃ to + 70 ℃

    Transport and storage temperature range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Aerial 9/125 outdoor multi tube

  • Fiber count
    2
    4
    6
    8

    Max. No of loose tube
    1

    Fiber No. per tube
    2
    4
    6
    8

    Loose tube diameter
    2.0±0.1mm

    Outer sheath thickness
    1.6±0.1mm

    Messenger wire
    1.0MM*7pcs galvanized steel

    Outer sheath material
    HDPE

    Cable OD mm
    10.6-11MM *5.0-5.2MM

    Cable weight
    66KG/KM

    Tensile
    3KN

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40 ℃ to + 70 ℃

    Transport and storage temperature

    range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Aerial 9/125 outdoor Uni-tube

  • Technical characteristics

    1) The unique extruding technology provides the fibers in the tube with good flexibility and bending endurance

    2) The unique fiber excess length control method provides the cable with excellent mechanical and environmental properties Multiple water blocking material filling provides dual water blocking function

     

    Construction:

    1. Fiber single mode G652D
    2. Gel core filling
    3. Center strength member steel wire
    4. Multi Loose tube
    5. Corrugated steel armor
    6. Cable jelly
    7. Red rip cord
    8. PE sheath

     

    Fiber count
    24

    Max. No of loose tube/ filler
    4/1

    Fiber No. per tube
    6

    Center strength member
    Steel wire 1.4±0.1MM

    Loose tube diameter
    1.7±0.1mm

    Armored
    Corrugated steel

    Water proof type
    Gel filled

    Outer sheath thickness
    1.5±0.1mm

    Outer sheath material
    HDPE

    Cable OD mm
    8.8±0.2MM

    Cable weight
    82KG±5/KM

    Tensile
    4KN

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40    ℃ to + 70 ℃

    Transport and storage temperature

    range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9/125 outdoor multi tube

  • Optics Specifications

    Attenuation(dB/km)
    @1310nm
    ≤0.34db/km

    @1383nm (after hydrogen aging)
    ≤0.32db/km

    @1550nm
    ≤0.20db/km

    @1625nm
    ≤0.24db/km

    Dispersion
    @1285nm~1340nm
    -3.0~3.0ps/(nm*km)

    @1550nm
    ≤18ps/(nm*km)

    @1625nm
    ≤22ps/(nm*km)

    Zero-Dispersion wavelength
    1300~1324nm

    Zero-Dispersion slope
    ≤0.092ps/(nm2*km)

    Mode field diameter @ 1310nm
    9.2±0.4μm

    Mode field diameter @ 1550nm
    10.4±0.8μm

    PMD
    Max. value for fiber on the reel
    0.2ps/km 1/2

    Max. Designed value for link
    0.08ps/km 1/2

    Cable cutoff wavelength,λ cc
    ≤1260nm

    Effective group index(Neff)@1310nm
    1.4675

    Effective group index(Neff)@1550nm
    1.4680

    Macro-bend loss(Φ60mm,100 turns)@1550nm
    ≤0.05db

    Back scatter characteristic(@1310nm&1550nm)

    Point discontinuity
    ≤0.05db

    Attenuation uniformity
    ≤0.05db/km

    Attenuation coefficient difference for bi-directional measurement
    ≤0.05db/km

    Geometrical characteristics

    Cladding diameter
    125±1μm

    Cladding non-circularity
    ≤1%

    Core/cladding concentricity error
    ≤0.4μm

    Fiber diameter with coating(uncolored)
    245±5μm

    Cladding/coating concentricity error
    ≤12.0μm

    Curl
    ≥4m

    Mechanical characteristic

    Proof test
    0.69GPa

    Coating strip force(typical value)
    1.4N

    Dynamic stress corrosion susceptibility parameter(typical value)
    ≥20

    Environmental characteristics(@1310nm&1550nm)

    Temperature induced attenuation(-60~+85℃)
    ≤0.5dB/km

    Dry heat induced attenuation(85±2℃,30days)
    ≤0.5dB/km

    Water immersion induced attenuation(23±2℃,30days)
    ≤0.5dB/km

    Damp heat induced attenuation(85±2℃,RH85%,30days)
    ≤0.5dB/km

     

     

    Fiber count
    2
    4
    6
    8
    12

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter/Material
    2.2+0.2mm/PBT

    Outer sheath thickness &Material
    1.5-1.8mm   HDPE

    Strength member
    Steel tape +Two steel wire

    Cable overall diameter
    8.5±0.2mm

    Cable weight
    Approx 65 kg/km

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40   ℃ to + 70 ℃

    Transport and storage temperature

    range
    – 40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    2000N

    Crush resistance
    Short term :2200N/100MM    Long term:

    1100N/100MM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9125 outdoor Multi-tube

  • Optics Specifications

    Attenuation(dB/km)
    @1310nm
    ≤0.34db/km

    @1383nm (after hydrogen aging)
    ≤0.32db/km

    @1550nm
    ≤0.20db/km

    @1625nm
    ≤0.24db/km

    Dispersion
    @1285nm~1340nm
    -3.0~3.0ps/(nm*km)

    @1550nm
    ≤18ps/(nm*km)

    @1625nm
    ≤22ps/(nm*km)

    Zero-Dispersion wavelength
    1300~1324nm

    Zero-Dispersion slope
    ≤0.092ps/(nm2*km)

    Mode field diameter @ 1310nm
    9.2±0.4μm

    Mode field diameter @ 1550nm
    10.4±0.8μm

    PMD
    Max. value for fiber on the reel
    0.2ps/km 1/2

    Max. Designed value for link
    0.08ps/km 1/2

    Cable cutoff wavelength,λ cc
    ≤1260nm

    Effective group index(Neff)@1310nm
    1.4675

    Effective group index(Neff)@1550nm
    1.4680

    Macro-bend loss(Φ60mm,100 turns)@1550nm
    ≤0.05db

    Back scatter characteristic(@1310nm&1550nm)

    Point discontinuity
    ≤0.05db

    Attenuation uniformity
    ≤0.05db/km

    Attenuation coefficient difference for bi-directional measurement
    ≤0.05db/km

    Geometrical characteristics

    Cladding diameter
    125±1μm

    Cladding non-circularity
    ≤1%

    Core/cladding concentricity error
    ≤0.4μm

    Fiber diameter with coating(uncolored)
    245±5μm

    Cladding/coating concentricity error
    ≤12.0μm

    Curl
    ≥4m

    Mechanical characteristic

    Proof test
    0.69GPa

    Coating strip force(typical value)
    1.4N

    Dynamic stress corrosion susceptibility parameter(typical value)
    ≥20

    Environmental characteristics(@1310nm&1550nm)

    Temperature induced attenuation(-60~+85℃)
    ≤0.5dB/km

    Dry heat induced attenuation(85±2℃,30days)
    ≤0.5dB/km

    Water immersion induced attenuation(23±2℃,30days)
    ≤0.5dB/km

    Damp heat induced attenuation(85±2℃,RH85%,30days)
    ≤0.5dB/km

     

     

    Fiber count
    2
    4
    6
    8
    12

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter/Material
    2.2+0.2mm/PBT

    Outer sheath thickness &Material
    1.5-1.8mm   HDPE

    Strength member
    Steel tape +Two steel wire

    Cable overall diameter
    8.5±0.2mm

    Cable weight
    Approx 65 kg/km

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40   ℃ to + 70 ℃

    Transport and storage temperature

    range
    – 40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    2000N

    Crush resistance
    Short term :2200N/100MM    Long term:

    1100N/100MM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9125 outdoor Uni-tube

  • Fiber count
    2-8
    12

    Fiber type
    Single Mode G652D

    Max. No of loose tube
    1

    Fiber No. per tube
    2-8
    12

    Loose tube diameter
    1.6mm
    2.0mm

    Outer sheath thickness
    1.5mm

    FRP Strength member
    0.8mm
    1.0mm

    Outer sheath
    HDPE

    Cable OD mm
    4.6±0.2mm
    5.8±0.2mm

    Cable weight kg/km
    19
    30

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40  ℃ to + 70 ℃

    Transport and storage temperature range
    -40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    Short term:1500  Long term:600

    Crush resistance
    1000 N/10cm    2200N/10CM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

     

    Fiber Optic Cable SM 9125 outdoor

    • This fiber optic splice tray is used for optic fiber management, storage and fiber optic fusion protection.
    • It’s easy for installation.
    • The splice tray expands fiber splice capabilities, providing the splicing location for fiber optic cables. It can be put into the fiber distribution frame, fiber splice closure, optic terminal box etc.
    • Book flip type, it’s easy for operating

    Fiber Optic Cassette Black 12 Port

    1. Self adjustable wedge
    2. Easy installation, tools free
    3. Material: aluminum and stainless steel, durable
    4. Superior mechanical strength
    5. Good environment stability
    6. Size: 338x70x30 mm
    7. Weight: 165g

    Fiber Optic Clamp 4kN B18

  • Fiber count: 1/2/4
    Color of fiber: Blue, Orange, Green, Brown, Grey
    Fiber Type: G657A2
    Strength member: Steel wire/FRP
    Supporting messenger wire: 1.0MM*x1 steel wire
    Outer sheath: LSZH Lower smoke zero halogen frame retardant & UV Anti
    Cable Diameter dimensions: 2.0( Height) × 5.0W ± 0.1 mm(width)
    Operation temperature range: -20 ℃ to + 70 ℃
    Installation temperature range: -20 ℃ to + 60 ℃
    Transport and storage temperature range: -20 ℃ to + 70 ℃
    Tension Load (N): Short term :800N Long term :500N
    Crush Load(N): Long term 1000 N/100mm Short term:2200N/100mm
    Minimal installation bending radius: 30 x OD
    Minimal operation bending radius: 15 x OD
    Cable marking: The marking length 1meter apart , as required

     

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees
     
    ≥4.0
    ≥4.0

    Cladding diameter
     
    125 ± 0.7
    125 ± 0.7

    Core/package concentricity
     
    ≤0.5
    ≤0.5

    Cladding non-circularity
     
    ≤1.0%
    ≤1.0%

    Coating diameter
     
    243± 5
    243± 5

    Coating concentricity
     
    ≤8
    ≤8

    Coating roundness
     
    ≤3%
    ≤3%

    Mechanical property
    Strain
     
    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

     
    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd
     
    ≥ 22
    ≥ 22

    Coating peak stripping force N
     
    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，
    ≤ 0.05
    ≤ 0.05

     
    1550nm, 1625 nm
     
     

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO1 Aerial outdoor G657A2

  • The typical bow-type drop optical cable includes central optical fibers with 2 Steel wire as the strength members placed on both sides, a LSZH sheath is extruded outside.

    Fiber Optical

    Fiber count
    1/2

    Color Of  fiber
    Blue Orange

    Fiber  Type
    G657A2

    Strength member
    Galvanized steel wire

    Outer sheath
    LSZH(white)

    Cable Diameter dimensions
    2.0( Height) × 3.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -0  ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    G657A2 fiber

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees

    ≥4.0
    ≥4.0

    Cladding diameter

    125 ± 0.7
    125 ± 0.7

    Core/package concentricity

    ≤0.5
    ≤0.5

    Cladding non-circularity

    ≤1.0%
    ≤1.0%

    Coating diameter

    243± 5
    243± 5

    Coating concentricity

    ≤8
    ≤8

    Coating roundness

    ≤3%
    ≤3%

    Mechanical property
    Strain

    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd

    ≥ 22
    ≥ 22

    Coating peak stripping force N

    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental

    performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

     

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，

    1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO1 SM indoor G657A2

  • Fiber Optic DROP Cable FO2 Aerial outdoor G657A

  • The typical bow-type drop optical cable includes central optical fibers with 2 Steel wire as the strength members placed on both sides, a LSZH sheath is extruded outside.

    Fiber Optical

    Fiber count
    1/2

    Color Of fiber
    Blue Orange

    Fiber Type
    G657A2

    Strength member
    Galvanized steel wire

    Outer sheath
    LSZH(white)

    Cable Diameter dimensions
    2.0( Height) × 3.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -0 ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    G657A2 fiber

    Category
    Description
    G657A2/B2

    Optical
    transmission
    performance
    Attenuation coefficient
    1310nm
    ≤0.35

    1383nm
    ≤0.35

    1550nm
    ≤0.21

    1625nm
    ≤0.23

    Attenuation inhomogeneity
    1310nm, 1550nm
    ≤0.05

    Attenuation discontinuity
    1310nm, 1550nm
    ≤0.05

    Wavelength attenuation
    characteristics
    1228 ~ 1330nm
    ≤0.05

    1525 ~ 1575nm
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength nm
    1300~1324

    Zero dispersion slope
    ≤0.092

    1288~1339nm
    ≤3.5

    1271~1360nm
    ≤5.3

    1550nm
    ≤18

    1625nm
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1

    Fiber cutoff wavelength
    ≤1260

    Macro bending loss
    （10 laps，30mm）
    1550nm
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤0.2

    （1 lap，15mm）
    1550nm
    ≤0.5

    （1 lap，15mm）
    1625nm
    ≤1.0

    Mode field diameter
    1310nm
    8.6±0.4

    Dimension
    parameter
    Warp degrees

    ≥4.0

    Cladding diameter

    125 ± 0.7

    Core/package concentricity

    ≤0.5

    Cladding non-circularity

    ≤1.0%

    Coating diameter

    243± 5

    Coating concentricity

    ≤8

    Coating roundness

    ≤3%

    Mechanical
    property
    Strain

    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76

    50% Weber fracture probability
    3.45

    Fatigue parameters Nd

    ≥ 22

    Coating peak stripping force N

    1.0~8.9

    Coating average stripping force N

    1.0~5.0

    Environmental
    performance
    Additional damping temperature cycle (-60℃ ～ +85℃)
    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm, 1550nm, 1625 nm
    ≤ 0.05

    High temperature aging(85±2℃，30 days ) dB/km @1310nm, 1550nm, 1625 nm
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km
    @1310nm，1550nm, 1625 nm
    ≤ 0.05

     

    Fiber Optic DROP Cable FO2 SM indoor G657A2

  • Fiber count
    1/2/4

    Color Of fiber
    Blue Orange Green Brown Grey

    Fiber Type
    G657A2

    Strength member
    Steel wire/FRP

    Supporting messenger wire
    1.0MM*x1 steel wire

    Outer sheath
    LSZH Lower smoke zero halogen frame retardant & UV Anti

    Cable Diameter dimensions
    2.0( Height) × 5.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -20 ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Tension Load (N)
    Short term :800N  Long term :500N

    Crush Load(N)
    Long term 1000 N/100mm  Short term:2200N/100mm

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees
     
    ≥4.0
    ≥4.0

    Cladding diameter
     
    125 ± 0.7
    125 ± 0.7

    Core/package concentricity
     
    ≤0.5
    ≤0.5

    Cladding non-circularity
     
    ≤1.0%
    ≤1.0%

    Coating diameter
     
    243± 5
    243± 5

    Coating concentricity
     
    ≤8
    ≤8

    Coating roundness
     
    ≤3%
    ≤3%

    Mechanical property
    Strain
     
    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

     
    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd
     
    ≥ 22
    ≥ 22

    Coating peak stripping force N
     
    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，
    ≤ 0.05
    ≤ 0.05

     
    1550nm, 1625 nm
     
     

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05q
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO4 Aerial outdoor G657A

  • Specification:

    1. Made of 3mm cold rolled steel, more durable
    2. Cold rolled steel, electrostatic spraying, excellent appearance
    3. Excellent mechanic performance
    4. Excellent design with guide rail; easier to do arrangement of wire
    5. Cable entries with cable gland and dust cover
    6. Easy to install and maintain

    Fiber optic patch panel 12-core SC/SX/APC

  • Specification:

    1. Made of 1.3mm cold rolled steel, more durable
    2. Cold rolled steel, electrostatic spraying, excellent appearance
    3. Excellent mechanic performance
    4. Excellent design with guide rail; easier to do arrangement of wire
    5. Cable entries with cable gland and dust cover
    6. Easy to install and maintain

    Fiber optic patch panel 24-core SC SX APC

  • Specification:

    1. Made of 3mm cold rolled steel, more durable
    2. Cold rolled steel, electrostatic spraying, excellent appearance
    3. Excellent mechanic performance
    4. Excellent design with guide rail; easier to do arrangement of wire
    5. Cable entries with cable gland and dust cover
    6. Easy to install and maintain

    Fiber optic patch panel 8-core SC/SX/APC

  • Features

    • Clear sleeve make it easy to detect splice before shrinkage
    • Easily use and avoid any damages to the optical fiber during installation
    • Airproof configuration keeping the splice point’s good resistance of humidity and temperature

    Fiber Optic Protective Sleeve Single Core 60mm

    • Type: Tension clamp for FTTH drop cable
    • Components: Body, wedge, shim, and a solid wire bail crimped to the
    • Material: All parts are made of stainless
    • Features: Designed to withstand tension, with components that have passed tensile
    • Easy installation, tools free
    • High mechanical strength
    • Remove and don’t hurt cable jacket
    • Stainless steel material corrosion resistant and durable
    • Applied with drive hook, pole bracket or other fittings
    • Excellent environmental stability
    • Supported cable: 2*6 mm
    • Material: Stainless steel
    • Break Load (KN): 1KN

    FTTH Tension Clamp ODWAC22 1kN

  •  

    Input:

    • Capacity: 10000 VA / 9000 W
    • Nominal Voltage: 3×400 VAC (3Ph+N)
    • Frequency range: 46-54 Hz or 56-64 Hz

     

    Output:

    • Output voltage: 208/220/230/240 VAC
    • AC voltage regulation (Batt. Mode): ± 1%
    • Frequency range (Batt. Mode):46-54 Hz or 56-64 Hz
    • Current crest ratio: 3:1 (max.)
    • Waveform (Batt. Mode): Pure sinewave

     

    Battery:

    • Battery type: 12 V/7 Ah
    • Typical recharge time: 9 hours recover to 90% capacity
    • Charging Voltage: 273 VDC ± 1% (Based on 20pcs batteries)

     

    Indicators:

    • LCD Display: UPS status, Load level, Input/Output voltage, Discharge timer, and Fault conditions 

     

    Alarm:

    • Battery mode: Sounding every 4 seconds
    • Low battery Sounding every second
    • Overload: Sounding twice every second
    • Fault: Continuously sounding

     

    Physical:

    • Dimension: D x W x H (mm): 592x250x576
    • Net weight (kgs): 83

     

    Galleon 3P-10K-80K-Family UPS

  • Gpon SFP C+++ SC

  • Avant-garde Design Sense

    Super Decoding Ability

    Handsfree with Stand

     

    Features

    • Fast reading on all 1D/2D bardcode on paper and screen
    • 0.3 million high performance imaging technology, fast reading speed 60 fps/s
    • Light industrial design, unique appearance, fashionable shape
    • Compatible with Windows 7/8/10, iOS, Android, Linux system
    • Plug and play, no need to install drivers, support firmware upgrade
    • Suitable for retail stores, supermarkets, restaurant, pharmacy, assembly line

    HS-330S Wired Barcode Scanner 2D

  • J-Y(St)Y 2x2x0.80+0.40MM LG Fire Alarm Cable

  • L925B Optical Fiber Mechanical Splicer

  • DESIGN

    1. Conductor: soft copper Diameter: 0,51 mm (±0,005 mm)
    2. Insulation: PE . Conductor diameter: 1,03 mm
    3. Pair: two conductors twisted together. Color identification of pairs: white-blue / blue and white – orange / orange
    4. Core wrapping
    5. Copper tinned contact wire Ø 0,4 mm is applied between the sheath and shield.
    6. Core shield: aluminum polymer foil (metal inside)
    7. Sheath: PE, nominal cable diameter: 6,0 mm, color: black

    APPLICATION

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s,

    100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s,

    Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s, ATM LAN 1,2 Gbit/s

    СOMPLIANCE WITH THE REQUIREMENTS

    ISO/IEC 11801:2002, EN 50173-1:2002, ANSI/TIA/EIA-568-B.2-1-2002, IEC 61156-5:2002, TU U 31.3-05758730-020-2002

    MECHANICAL CHARACTERISTICS

    Тemperature range:

    During installation -10 °C … +60 °C

    After installation -50 °C … +60 °C

    Bending radius:

    During installation ≥ 8 cable diameters After installation ≥ 4 cable diameters

    Tensile stress ≤ 85 N

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance
    Оhm/km
    ≤ 100

    Insulation resistance
    GOhm/km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,65

    Characteristic impedance in the frequency range of:
    Ohm
    100±15

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20

    Attenuation, dB, max
    2,1
    4,1
    6,5
    8,3
    9,3

    NEXT, dB, min
    65,3
    56,2
    50,3
    47,2
    45,7

    PS NEXT, dB, min
    62,3
    53,2
    47,3
    44,2
    42,7

    ELFEXT, dB, min
    64
    51,9
    44
    39,9
    37,9

    PS ELFEXT, dB, min
    61
    48,9
    41
    36,9
    34,9

    RL, dB, min
    20
    23
    25
    25
    25

    Frequency, MHz
    31,25
    62,5
    100

    Attenuation, dB, max
    11,7
    17,0
    22,0

    NEXT, dB, min
    42,8
    38,3
    35,3

    PS NEXT, dB, min
    39,8
    35,3
    32,3

    ELFEXT, dB, min
    34,1
    28
    24

    PS ELFEXT, dB, min
    31,1
    25
    21

    RL, dB, min
    23,6
    21,5
    20,1

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT 5 F/UTP 2x2x24 AWG outdoor

  • APPLICATION

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Firewire 100 Mbit/s, PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), PoE++ (IEEE 802.3bt), HDBaseT, 1000BASE-T, 2.5GBASE-T, 5GBASE-T

    СOMPLIANCE WITH THE REQUIREMENTS

    Cable: IEC 61156-5 (cat.5e)

    Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)

    Fire safety: IEC 60332-1, CPR class Eca

    MECHANICAL CHARACTERISTICS

    Тemperature range:

    · During installation -10 °C … +60 °C

    · After installation -20 °C … +60 °C
    Bending radius:

    · During installation ≥ 8 cable diameters

    · After installation ≥ 4 cable diameters
    Tensile stress ≤ 85 N

     

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance for

    conductors with Ø:

    0,51 mm

    0,48 mm

    0,46 mm

    0,44 mm
    Оhm/km
     

     

    ≤ 92

    ≤ 103

    ≤ 112

    ≤ 123

    Insulation resistance
    GOhm*km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,69

    Characteristic impedance in the

    frequency range of: 1-100 MHz
    Ohm
    100±15

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20

    Attenuation, dB, max; for max. cable lengths with conductor Ø:
    2,1
    4,1
    6,5
    8,3
    9,3

    0,51 mm = 104 m

    0,48 mm = 92 m

    0,46 mm = 84 m

    0,44 mm = 77 m

    NEXT, dB, min
    65,3
    56,3
    50,3
    47,2
    45,8

    PS NEXT, dB, min
    62,3
    53,3
    47,3
    44,2
    42,8

    ELFEXT, dB, min
    64
    52
    44
    40
    38

    PS ELFEXT, dB, min
    61
    49
    41
    37
    35

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0

    Frequency, MHz
    31,25
    62,5
    100

    Attenuation, dB, max; for max. cable lengths with conductor Ø:
    11,7
    17,0
    22,0

    0,51 mm = 104 m

    0,48 mm = 92 m

    0,46 mm = 84 m

    0,44 mm = 77 m

    NEXT, dB, min
    42,9
    38,4
    35,3

    PS NEXT, dB, min
    39,9
    35,4
    32,3

    ELFEXT, dB, min
    34
    28,1
    24

    PS ELFEXT, dB, min
    31
    25,1
    21

    RL, dB, min
    23,6
    21,5
    20,1

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT 5 SF/UTP 4x2x23 AWG

  • Application

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s

    Installation and Operation Conditions

    For outdoor installation in telephone ducts, collectors, mines, on the walls of buildings in conditions of heightened electro-magnetic impacts.
    Operated on frequencies up to 250 MHz

    Compliance with the requirements

    Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568-C.2

    Cable: IEC 61156-2

    Mechanical Characteristics

    Temperature range:    During installation -10 °C … +60 °C

    After installation -20 °C … +60 °C

    Bending radius:            During installation ≥ 8 cable diameters

    After installation ≥ 4 cable diameters

    Tensile stress ≤ 85 N

     

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance
    Оhm/km
    ≤ 95

    Insulation resistance
    GOhm/km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,68

    Propagation delay
    ns/100 m
    ≤ 534+36/√f

    Delay shift on the frequency 100 MHz
    ns/100 m
    ≤ 30

    Characteristic impedance in the frequency range of:

    1-100 MHz
     

    Ohm
     

    100±15

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20

    Attenuation, dB, max:
    2,1
    4,1
    6,5
    8,3
    9,3

    NEXT, dB, min
    65,3
    56,3
    50,3
    47,2
    45,8

    ELFEXT, dB, min
    64
    52
    44
    40
    38

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0

    Frequency, MHz
    31,25
    62,5
    100

    Attenuation, dB, max:
    11,7
    17,0
    22,0

    NEXT, dB, min
    42,9
    38,4
    35,3

    ELFEXT, dB, min
    34
    28
    24

    RL, dB, min
    23,3
    20,7
    19,0

    IEC 61156-5, values lower than 4 MHz are given for information only

     

    LAN Cable CAT 5 U/UTP 2x2x24 AWG indoor

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: solid PE
    • Pair: two conductors twisted together
    • Core wrapping
    • Copper tinned contact wire Ø 0,4 mm
    • Core shield: aluminum polymer foil (metal outside)
    • Jacket: PVC, color RAL 7035

      СOMPLIANCE WITH THE REQUIREMENTS:
    • Cable: IEC 61156-5 (cat.5e)
    • Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)
    • Fire safety: IEC 60332-1, CPR class EcaMECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:
      – During installation ≥ 8 cable diameters
      – After installation ≥ 4 cable diameters
      Tensile stress ≤ 85 N

      ELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors: Оhm/km ≤ 95
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 5E F/UTP 4x2x24 AWG Outdoor Cable

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: LSZH
    • Pair: two conductors twisted together
    • Core wrapping
    • Copper tinned contact wire Ø 0,4 mm
    • Core shield: aluminum polymer foil (metal outside)
    • Jacket: PVC, LSZH, LSFRZH
    • СOMPLIANCE WITH THE REQUIREMENTS:
    • Cable: IEC 61156-5 (cat.5e)
    • Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)
    • Fire safety: IEC 60332-1, CPR class EcaMECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:
      – During installation ≥ 8 cable diameters
      – After installation ≥ 4 cable diameters
      Tensile stress ≤ 85 N

      ELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors: Оhm/km ≤ 95
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 5E LSZH F/UTP 4x2x24 AWG Indoor Cable

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: solid PE
    • Pair: two conductors twisted together
    • Core wrapping
    • Jacket: PVC, color RAL 7035
    • СOMPLIANCE WITH THE REQUIREMENTS:
    • Cable: IEC 61156-5 (cat.5e)
    • Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)
    • Fire safety: IEC 60332-1, CPR class Eca 

      MECHANICAL CHARACTERISTICS:

    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:
      – During installation ≥ 8 cable diameters
      – After installation ≥ 4 cable diameters
      Tensile stress ≤ 85 N

      ELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors(-0.51 mm; -0.50mm): Оhm/km ≤ 92-95
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 5E U/UTP 4x2x24 AWG Indoor Cable

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: PE
    • Pair: two conductors twisted together:
      – Pair 1: white-blue / blue
      – Pair 2: white-orange / orange
      – Pair 3: white-green / green
      – Pair 4: white – brown / brown
    • Cross-web (PE or LSFRZH)
    • Core wrapping
    • Core shield: aluminum polymer foil (metal outside)
    • Copper tinned contact wire Ø 0,4 mm
    • Jacket: PVC, LSZH, LSFRZH
    • MECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius: ≥ 10 cable diameters
    • Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors(0,54 mm; 0,57 mm): Оhm/km ≤ 83-88
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 6 F/UTP 4x2x23 AWG Indoor Cable

  • APPLICATION

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155

    Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s, 10 Gigabit Ethernet (10GBASE-T*), ATM LAN 1,2 Gbit/s

    INSTALLATION AND OPERATION CONDITIONS

    For stationary installation inside buildings, stations, structures and equipment in conditions of heightened electromagnetic impacts. Operated on frequencies up to 250 MHz.

    СOMPLIANCE WITH THE REQUIREMENTS

    System: ISO/IEC 11801, EN 50173-1, ANSI/TIA 568-С.2 Cable: IEC 61156-5

    Fire safety: IEC 60332-1, IEC 61034-1, IEC 60754-2

    CPR class: Eca

    MECHANICAL CHARACTERISTICS

    Тemperature range:

    During installation -10 °C … +60 °C / After installation -20 °C … +60 °C

    Bending radius:

    During installation ≥ 8 cable diameters / After installation ≥ 4 cable diameters

    Tensile stress ≤ 85 N

     

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance
    Оhm/km
    ≤ 85

    Insulation resistance
    GOhm/km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,68

    Propagation delay
    ns/100 m
    ≤ 534+36/√f

    Delay shift on the frequency 100 MHz
    ns/100 m
    ≤ 30

    Characteristic impedance in the frequency range of: 1-100 MHz

    100-250 MHz
     

    Ohm
     

    100±15

    100±22

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20
    31,25

    Attenuation, dB, max
    2,1
    3,8
    6
    7,6
    8,5
    10,8

    NEXT, dB, min
    75,3
    66,3
    60,3
    57,3
    55,8
    52,8

    PS NEXT, dB, min
    72,3
    63,3
    57,3
    54,3
    52,8
    49,8

    ELFEXT, dB, min
    68
    56
    48
    44
    42
    38

    PS ELFEXT, dB, min
    65
    53
    45
    41
    39
    35

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0
    23,6

    Frequency, MHz
    62,5
    100
    125
    200
    250

    Attenuation, dB, max
    15,5
    19,9
    22,5
    29,1
    33

    NEXT, dB, min
    48,3
    45,3
    43,8
    40,8
    39,3

    PS NEXT, dB, min
    45,3
    42,3
    40,8
    37,8
    36,3

    ELFEXT, dB, min
    32
    28
    26
    22
    20

    PS ELFEXT, dB, min
    29
    25
    23
    19
    17

    RL, dB, min
    21,5
    20,1
    19,4
    18,0
    17,3

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT 6 F/UTP LSZH 4x2x23 AWG

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T
    • 10GBASE-T

      DESIGN:
    • Conductor: soft copper wire
    • Insulation: PE
    • Pair: two conductors twisted together:
      – Pair 1: white-blue / blue
      – Pair 2: white-orange / orange
      – Pair 3: white-green / green
      – Pair 4: white – brown / brown
    • Cross-web (PE or LSFRZH)
    • Core wrapping
    • Core shield1: aluminum polymer foil (metal outside)
    • Core shield 2: tined copper braid
    • Sheath: UV-stabilized PE
    • MECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius: ≥ 10 cable diameters
    • Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors(0,54 mm; 0,57 mm): Оhm/km ≤ 83-88
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 6 SF/UTP 4x2x23 AWG Indoor Cable

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Token Ring 16/100 Mbit/s
    • Fast Ethernet (100BASE-TX)
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T
    • PoE
    • PoE+
    • 4PPoE

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: PE
    • Pair: two conductors twisted:
    • Cross-web: HDPE, 2,6×2,6 mm
    • Jacket: LS0H, nominal thickness 0,5 mm; PVC, nominal thickness 0,5 mm
    • STANDARDS:
    • Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568.2-D
    • Cable: IEC 61156-5, EN 50288-6-1
    • Fire safety:LS0H jacket: EN 60332-1-2
    • CPR class: Eca
    • MECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:- During installation ≥ 8 cable diameters- After installation ≥ 4 cable diameters
    • Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors TPG(0,52; 0,54 mm; 0,57 mm): Оhm/km ≤ 75-82-87
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 6 U/UTP LSZH 4x2x23 AWG Indoor Cable

  • Описание

    Кабель многопарный симметричный для применения в сетях ШПД. Предназначен для стационарной наружной прокладки в условиях по-вышенных электромагнитных влияний. Эксплуатация при частотах до 100 МГц с номинальным напряжением до 72 В постоянного тока, с дли-ной канала связи (Chanel) до 100 метров.

     

    Применение

    • PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Token Ring 16/100 Mbit/s
    • Fast Ethernet (100BASE-TX), Gigabit Ethernet (1000BASE-T), 2,5 Gbit/s Ethernet (2.5GBASE-T)
    • PoE, PoE+, PoE++

     

    Механические характеристики

    Диапазон рабочих температур:

    • Во время установки -10 °C … +60 °C
    • После установки -20 °C … +60 °C

     

    Радиус изгиба:

    • Во время установки ≥ 10 диаметров кабеля
    • После установки ≥ 4 диаметров кабеля

     

    Растягивающее усилие: ≤ 400 Н

    LAN Cable CAT5 F/UTP 25x2x0,46 AWG Outdoor