Cables

Default sorting
Show
16

  • Optics Specifications

    Attenuation(dB/km)
    @1310nm
    ≤0.34db/km

    @1383nm (after hydrogen aging)
    ≤0.32db/km

    @1550nm
    ≤0.20db/km

    @1625nm
    ≤0.24db/km

    Dispersion
    @1285nm~1340nm
    -3.0~3.0ps/(nm*km)

    @1550nm
    ≤18ps/(nm*km)

    @1625nm
    ≤22ps/(nm*km)

    Zero-Dispersion wavelength
    1300~1324nm

    Zero-Dispersion slope
    ≤0.092ps/(nm2*km)

    Mode field diameter @ 1310nm
    9.2±0.4μm

    Mode field diameter @ 1550nm
    10.4±0.8μm

    PMD
    Max. value for fiber on the reel
    0.2ps/km 1/2

    Max. Designed value for link
    0.08ps/km 1/2

    Cable cutoff wavelength,λ cc
    ≤1260nm

    Effective group index(Neff)@1310nm
    1.4675

    Effective group index(Neff)@1550nm
    1.4680

    Macro-bend loss(Φ60mm,100 turns)@1550nm
    ≤0.05db

    Back scatter characteristic(@1310nm&1550nm)

    Point discontinuity
    ≤0.05db

    Attenuation uniformity
    ≤0.05db/km

    Attenuation coefficient difference for bi-directional measurement
    ≤0.05db/km

    Geometrical characteristics

    Cladding diameter
    125±1μm

    Cladding non-circularity
    ≤1%

    Core/cladding concentricity error
    ≤0.4μm

    Fiber diameter with coating(uncolored)
    245±5μm

    Cladding/coating concentricity error
    ≤12.0μm

    Curl
    ≥4m

    Mechanical characteristic

    Proof test
    0.69GPa

    Coating strip force(typical value)
    1.4N

    Dynamic stress corrosion susceptibility parameter(typical value)
    ≥20

    Environmental characteristics(@1310nm&1550nm)

    Temperature induced attenuation(-60~+85℃)
    ≤0.5dB/km

    Dry heat induced attenuation(85±2℃,30days)
    ≤0.5dB/km

    Water immersion induced attenuation(23±2℃,30days)
    ≤0.5dB/km

    Damp heat induced attenuation(85±2℃,RH85%,30days)
    ≤0.5dB/km

     

     

    Fiber count
    2
    4
    6
    8
    12

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter/Material
    2.2+0.2mm/PBT

    Outer sheath thickness &Material
    1.5-1.8mm   HDPE

    Strength member
    Steel tape +Two steel wire

    Cable overall diameter
    8.5±0.2mm

    Cable weight
    Approx 65 kg/km

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40   ℃ to + 70 ℃

    Transport and storage temperature

    range
    – 40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    2000N

    Crush resistance
    Short term :2200N/100MM    Long term:

    1100N/100MM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9125 outdoor Multi-tube

  • Optics Specifications

    Attenuation(dB/km)
    @1310nm
    ≤0.34db/km

    @1383nm (after hydrogen aging)
    ≤0.32db/km

    @1550nm
    ≤0.20db/km

    @1625nm
    ≤0.24db/km

    Dispersion
    @1285nm~1340nm
    -3.0~3.0ps/(nm*km)

    @1550nm
    ≤18ps/(nm*km)

    @1625nm
    ≤22ps/(nm*km)

    Zero-Dispersion wavelength
    1300~1324nm

    Zero-Dispersion slope
    ≤0.092ps/(nm2*km)

    Mode field diameter @ 1310nm
    9.2±0.4μm

    Mode field diameter @ 1550nm
    10.4±0.8μm

    PMD
    Max. value for fiber on the reel
    0.2ps/km 1/2

    Max. Designed value for link
    0.08ps/km 1/2

    Cable cutoff wavelength,λ cc
    ≤1260nm

    Effective group index(Neff)@1310nm
    1.4675

    Effective group index(Neff)@1550nm
    1.4680

    Macro-bend loss(Φ60mm,100 turns)@1550nm
    ≤0.05db

    Back scatter characteristic(@1310nm&1550nm)

    Point discontinuity
    ≤0.05db

    Attenuation uniformity
    ≤0.05db/km

    Attenuation coefficient difference for bi-directional measurement
    ≤0.05db/km

    Geometrical characteristics

    Cladding diameter
    125±1μm

    Cladding non-circularity
    ≤1%

    Core/cladding concentricity error
    ≤0.4μm

    Fiber diameter with coating(uncolored)
    245±5μm

    Cladding/coating concentricity error
    ≤12.0μm

    Curl
    ≥4m

    Mechanical characteristic

    Proof test
    0.69GPa

    Coating strip force(typical value)
    1.4N

    Dynamic stress corrosion susceptibility parameter(typical value)
    ≥20

    Environmental characteristics(@1310nm&1550nm)

    Temperature induced attenuation(-60~+85℃)
    ≤0.5dB/km

    Dry heat induced attenuation(85±2℃,30days)
    ≤0.5dB/km

    Water immersion induced attenuation(23±2℃,30days)
    ≤0.5dB/km

    Damp heat induced attenuation(85±2℃,RH85%,30days)
    ≤0.5dB/km

     

     

    Fiber count
    2
    4
    6
    8
    12

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter/Material
    2.2+0.2mm/PBT

    Outer sheath thickness &Material
    1.5-1.8mm   HDPE

    Strength member
    Steel tape +Two steel wire

    Cable overall diameter
    8.5±0.2mm

    Cable weight
    Approx 65 kg/km

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40   ℃ to + 70 ℃

    Transport and storage temperature

    range
    – 40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    2000N

    Crush resistance
    Short term :2200N/100MM    Long term:

    1100N/100MM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9125 outdoor Uni-tube

  • Fiber count
    2-8
    12

    Fiber type
    Single Mode G652D

    Max. No of loose tube
    1

    Fiber No. per tube
    2-8
    12

    Loose tube diameter
    1.6mm
    2.0mm

    Outer sheath thickness
    1.5mm

    FRP Strength member
    0.8mm
    1.0mm

    Outer sheath
    HDPE

    Cable OD mm
    4.6±0.2mm
    5.8±0.2mm

    Cable weight kg/km
    19
    30

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40  ℃ to + 70 ℃

    Transport and storage temperature range
    -40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    Short term:1500  Long term:600

    Crush resistance
    1000 N/10cm    2200N/10CM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

     

    Fiber Optic Cable SM 9125 outdoor

  • Fiber count: 1/2/4
    Color of fiber: Blue, Orange, Green, Brown, Grey
    Fiber Type: G657A2
    Strength member: Steel wire/FRP
    Supporting messenger wire: 1.0MM*x1 steel wire
    Outer sheath: LSZH Lower smoke zero halogen frame retardant & UV Anti
    Cable Diameter dimensions: 2.0( Height) × 5.0W ± 0.1 mm(width)
    Operation temperature range: -20 ℃ to + 70 ℃
    Installation temperature range: -20 ℃ to + 60 ℃
    Transport and storage temperature range: -20 ℃ to + 70 ℃
    Tension Load (N): Short term :800N Long term :500N
    Crush Load(N): Long term 1000 N/100mm Short term:2200N/100mm
    Minimal installation bending radius: 30 x OD
    Minimal operation bending radius: 15 x OD
    Cable marking: The marking length 1meter apart , as required

     

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees
     
    ≥4.0
    ≥4.0

    Cladding diameter
     
    125 ± 0.7
    125 ± 0.7

    Core/package concentricity
     
    ≤0.5
    ≤0.5

    Cladding non-circularity
     
    ≤1.0%
    ≤1.0%

    Coating diameter
     
    243± 5
    243± 5

    Coating concentricity
     
    ≤8
    ≤8

    Coating roundness
     
    ≤3%
    ≤3%

    Mechanical property
    Strain
     
    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

     
    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd
     
    ≥ 22
    ≥ 22

    Coating peak stripping force N
     
    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，
    ≤ 0.05
    ≤ 0.05

     
    1550nm, 1625 nm
     
     

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO1 Aerial outdoor G657A2

  • The typical bow-type drop optical cable includes central optical fibers with 2 Steel wire as the strength members placed on both sides, a LSZH sheath is extruded outside.

    Fiber Optical

    Fiber count
    1/2

    Color Of  fiber
    Blue Orange

    Fiber  Type
    G657A2

    Strength member
    Galvanized steel wire

    Outer sheath
    LSZH(white)

    Cable Diameter dimensions
    2.0( Height) × 3.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -0  ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    G657A2 fiber

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees

    ≥4.0
    ≥4.0

    Cladding diameter

    125 ± 0.7
    125 ± 0.7

    Core/package concentricity

    ≤0.5
    ≤0.5

    Cladding non-circularity

    ≤1.0%
    ≤1.0%

    Coating diameter

    243± 5
    243± 5

    Coating concentricity

    ≤8
    ≤8

    Coating roundness

    ≤3%
    ≤3%

    Mechanical property
    Strain

    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd

    ≥ 22
    ≥ 22

    Coating peak stripping force N

    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental

    performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

     

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，

    1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO1 SM indoor G657A2

  • Fiber Optic DROP Cable FO2 Aerial outdoor G657A

  • The typical bow-type drop optical cable includes central optical fibers with 2 Steel wire as the strength members placed on both sides, a LSZH sheath is extruded outside.

    Fiber Optical

    Fiber count
    1/2

    Color Of fiber
    Blue Orange

    Fiber Type
    G657A2

    Strength member
    Galvanized steel wire

    Outer sheath
    LSZH(white)

    Cable Diameter dimensions
    2.0( Height) × 3.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -0 ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    G657A2 fiber

    Category
    Description
    G657A2/B2

    Optical
    transmission
    performance
    Attenuation coefficient
    1310nm
    ≤0.35

    1383nm
    ≤0.35

    1550nm
    ≤0.21

    1625nm
    ≤0.23

    Attenuation inhomogeneity
    1310nm, 1550nm
    ≤0.05

    Attenuation discontinuity
    1310nm, 1550nm
    ≤0.05

    Wavelength attenuation
    characteristics
    1228 ~ 1330nm
    ≤0.05

    1525 ~ 1575nm
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength nm
    1300~1324

    Zero dispersion slope
    ≤0.092

    1288~1339nm
    ≤3.5

    1271~1360nm
    ≤5.3

    1550nm
    ≤18

    1625nm
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1

    Fiber cutoff wavelength
    ≤1260

    Macro bending loss
    （10 laps，30mm）
    1550nm
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤0.2

    （1 lap，15mm）
    1550nm
    ≤0.5

    （1 lap，15mm）
    1625nm
    ≤1.0

    Mode field diameter
    1310nm
    8.6±0.4

    Dimension
    parameter
    Warp degrees

    ≥4.0

    Cladding diameter

    125 ± 0.7

    Core/package concentricity

    ≤0.5

    Cladding non-circularity

    ≤1.0%

    Coating diameter

    243± 5

    Coating concentricity

    ≤8

    Coating roundness

    ≤3%

    Mechanical
    property
    Strain

    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76

    50% Weber fracture probability
    3.45

    Fatigue parameters Nd

    ≥ 22

    Coating peak stripping force N

    1.0~8.9

    Coating average stripping force N

    1.0~5.0

    Environmental
    performance
    Additional damping temperature cycle (-60℃ ～ +85℃)
    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm, 1550nm, 1625 nm
    ≤ 0.05

    High temperature aging(85±2℃，30 days ) dB/km @1310nm, 1550nm, 1625 nm
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km
    @1310nm，1550nm, 1625 nm
    ≤ 0.05

     

    Fiber Optic DROP Cable FO2 SM indoor G657A2

  • Fiber count
    1/2/4

    Color Of fiber
    Blue Orange Green Brown Grey

    Fiber Type
    G657A2

    Strength member
    Steel wire/FRP

    Supporting messenger wire
    1.0MM*x1 steel wire

    Outer sheath
    LSZH Lower smoke zero halogen frame retardant & UV Anti

    Cable Diameter dimensions
    2.0( Height) × 5.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -20 ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Tension Load (N)
    Short term :800N  Long term :500N

    Crush Load(N)
    Long term 1000 N/100mm  Short term:2200N/100mm

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees
     
    ≥4.0
    ≥4.0

    Cladding diameter
     
    125 ± 0.7
    125 ± 0.7

    Core/package concentricity
     
    ≤0.5
    ≤0.5

    Cladding non-circularity
     
    ≤1.0%
    ≤1.0%

    Coating diameter
     
    243± 5
    243± 5

    Coating concentricity
     
    ≤8
    ≤8

    Coating roundness
     
    ≤3%
    ≤3%

    Mechanical property
    Strain
     
    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

     
    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd
     
    ≥ 22
    ≥ 22

    Coating peak stripping force N
     
    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，
    ≤ 0.05
    ≤ 0.05

     
    1550nm, 1625 nm
     
     

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05q
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO4 Aerial outdoor G657A

  • DESIGN

    1. Conductor: soft copper Diameter: 0,51 mm (±0,005 mm)
    2. Insulation: PE . Conductor diameter: 1,03 mm
    3. Pair: two conductors twisted together. Color identification of pairs: white-blue / blue and white – orange / orange
    4. Core wrapping
    5. Copper tinned contact wire Ø 0,4 mm is applied between the sheath and shield.
    6. Core shield: aluminum polymer foil (metal inside)
    7. Sheath: PE, nominal cable diameter: 6,0 mm, color: black

    APPLICATION

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s,

    100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s,

    Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s, ATM LAN 1,2 Gbit/s

    СOMPLIANCE WITH THE REQUIREMENTS

    ISO/IEC 11801:2002, EN 50173-1:2002, ANSI/TIA/EIA-568-B.2-1-2002, IEC 61156-5:2002, TU U 31.3-05758730-020-2002

    MECHANICAL CHARACTERISTICS

    Тemperature range:

    During installation -10 °C … +60 °C

    After installation -50 °C … +60 °C

    Bending radius:

    During installation ≥ 8 cable diameters After installation ≥ 4 cable diameters

    Tensile stress ≤ 85 N

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance
    Оhm/km
    ≤ 100

    Insulation resistance
    GOhm/km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,65

    Characteristic impedance in the frequency range of:
    Ohm
    100±15

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20

    Attenuation, dB, max
    2,1
    4,1
    6,5
    8,3
    9,3

    NEXT, dB, min
    65,3
    56,2
    50,3
    47,2
    45,7

    PS NEXT, dB, min
    62,3
    53,2
    47,3
    44,2
    42,7

    ELFEXT, dB, min
    64
    51,9
    44
    39,9
    37,9

    PS ELFEXT, dB, min
    61
    48,9
    41
    36,9
    34,9

    RL, dB, min
    20
    23
    25
    25
    25

    Frequency, MHz
    31,25
    62,5
    100

    Attenuation, dB, max
    11,7
    17,0
    22,0

    NEXT, dB, min
    42,8
    38,3
    35,3

    PS NEXT, dB, min
    39,8
    35,3
    32,3

    ELFEXT, dB, min
    34,1
    28
    24

    PS ELFEXT, dB, min
    31,1
    25
    21

    RL, dB, min
    23,6
    21,5
    20,1

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT 5 F/UTP 2x2x24 AWG outdoor

  • APPLICATION

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Firewire 100 Mbit/s, PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), PoE++ (IEEE 802.3bt), HDBaseT, 1000BASE-T, 2.5GBASE-T, 5GBASE-T

    СOMPLIANCE WITH THE REQUIREMENTS

    Cable: IEC 61156-5 (cat.5e)

    Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)

    Fire safety: IEC 60332-1, CPR class Eca

    MECHANICAL CHARACTERISTICS

    Тemperature range:

    · During installation -10 °C … +60 °C

    · After installation -20 °C … +60 °C
    Bending radius:

    · During installation ≥ 8 cable diameters

    · After installation ≥ 4 cable diameters
    Tensile stress ≤ 85 N

     

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance for

    conductors with Ø:

    0,51 mm

    0,48 mm

    0,46 mm

    0,44 mm
    Оhm/km
     

     

    ≤ 92

    ≤ 103

    ≤ 112

    ≤ 123

    Insulation resistance
    GOhm*km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,69

    Characteristic impedance in the

    frequency range of: 1-100 MHz
    Ohm
    100±15

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20

    Attenuation, dB, max; for max. cable lengths with conductor Ø:
    2,1
    4,1
    6,5
    8,3
    9,3

    0,51 mm = 104 m

    0,48 mm = 92 m

    0,46 mm = 84 m

    0,44 mm = 77 m

    NEXT, dB, min
    65,3
    56,3
    50,3
    47,2
    45,8

    PS NEXT, dB, min
    62,3
    53,3
    47,3
    44,2
    42,8

    ELFEXT, dB, min
    64
    52
    44
    40
    38

    PS ELFEXT, dB, min
    61
    49
    41
    37
    35

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0

    Frequency, MHz
    31,25
    62,5
    100

    Attenuation, dB, max; for max. cable lengths with conductor Ø:
    11,7
    17,0
    22,0

    0,51 mm = 104 m

    0,48 mm = 92 m

    0,46 mm = 84 m

    0,44 mm = 77 m

    NEXT, dB, min
    42,9
    38,4
    35,3

    PS NEXT, dB, min
    39,9
    35,4
    32,3

    ELFEXT, dB, min
    34
    28,1
    24

    PS ELFEXT, dB, min
    31
    25,1
    21

    RL, dB, min
    23,6
    21,5
    20,1

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT 5 SF/UTP 4x2x23 AWG

  • Application

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s

    Installation and Operation Conditions

    For outdoor installation in telephone ducts, collectors, mines, on the walls of buildings in conditions of heightened electro-magnetic impacts.
    Operated on frequencies up to 250 MHz

    Compliance with the requirements

    Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568-C.2

    Cable: IEC 61156-2

    Mechanical Characteristics

    Temperature range:    During installation -10 °C … +60 °C

    After installation -20 °C … +60 °C

    Bending radius:            During installation ≥ 8 cable diameters

    After installation ≥ 4 cable diameters

    Tensile stress ≤ 85 N

     

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance
    Оhm/km
    ≤ 95

    Insulation resistance
    GOhm/km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,68

    Propagation delay
    ns/100 m
    ≤ 534+36/√f

    Delay shift on the frequency 100 MHz
    ns/100 m
    ≤ 30

    Characteristic impedance in the frequency range of:

    1-100 MHz
     

    Ohm
     

    100±15

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20

    Attenuation, dB, max:
    2,1
    4,1
    6,5
    8,3
    9,3

    NEXT, dB, min
    65,3
    56,3
    50,3
    47,2
    45,8

    ELFEXT, dB, min
    64
    52
    44
    40
    38

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0

    Frequency, MHz
    31,25
    62,5
    100

    Attenuation, dB, max:
    11,7
    17,0
    22,0

    NEXT, dB, min
    42,9
    38,4
    35,3

    ELFEXT, dB, min
    34
    28
    24

    RL, dB, min
    23,3
    20,7
    19,0

    IEC 61156-5, values lower than 4 MHz are given for information only

     

    LAN Cable CAT 5 U/UTP 2x2x24 AWG indoor

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: solid PE
    • Pair: two conductors twisted together
    • Core wrapping
    • Copper tinned contact wire Ø 0,4 mm
    • Core shield: aluminum polymer foil (metal outside)
    • Jacket: PVC, color RAL 7035

      СOMPLIANCE WITH THE REQUIREMENTS:
    • Cable: IEC 61156-5 (cat.5e)
    • Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)
    • Fire safety: IEC 60332-1, CPR class EcaMECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:
      – During installation ≥ 8 cable diameters
      – After installation ≥ 4 cable diameters
      Tensile stress ≤ 85 N

      ELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors: Оhm/km ≤ 95
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 5E F/UTP 4x2x24 AWG Outdoor Cable

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: LSZH
    • Pair: two conductors twisted together
    • Core wrapping
    • Copper tinned contact wire Ø 0,4 mm
    • Core shield: aluminum polymer foil (metal outside)
    • Jacket: PVC, LSZH, LSFRZH
    • СOMPLIANCE WITH THE REQUIREMENTS:
    • Cable: IEC 61156-5 (cat.5e)
    • Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)
    • Fire safety: IEC 60332-1, CPR class EcaMECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:
      – During installation ≥ 8 cable diameters
      – After installation ≥ 4 cable diameters
      Tensile stress ≤ 85 N

      ELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors: Оhm/km ≤ 95
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 5E LSZH F/UTP 4x2x24 AWG Indoor Cable

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: solid PE
    • Pair: two conductors twisted together
    • Core wrapping
    • Jacket: PVC, color RAL 7035
    • СOMPLIANCE WITH THE REQUIREMENTS:
    • Cable: IEC 61156-5 (cat.5e)
    • Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)
    • Fire safety: IEC 60332-1, CPR class Eca 

      MECHANICAL CHARACTERISTICS:

    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:
      – During installation ≥ 8 cable diameters
      – After installation ≥ 4 cable diameters
      Tensile stress ≤ 85 N

      ELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors(-0.51 mm; -0.50mm): Оhm/km ≤ 92-95
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 5E U/UTP 4x2x24 AWG Indoor Cable

  •           APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T (up to 55 meters)

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: PE
    • Pair: two conductors twisted together:
      – Pair 1: white-blue / blue
      – Pair 2: white-orange / orange
      – Pair 3: white-green / green
      – Pair 4: white – brown / brown
    • Cross-web (PE or LSFRZH)
    • Core wrapping
    • Core shield: aluminum polymer foil (metal outside)
    • Copper tinned contact wire Ø 0,4 mm
    • Jacket: PVC, LSZH, LSFRZH
    • MECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius: ≥ 10 cable diameters
    • Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors(0,54 mm; 0,57 mm): Оhm/km ≤ 83-88
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
    • Test voltage between cores, (DC, 2 s): kV 2,5

    LAN Cable CAT 6 F/UTP 4x2x23 AWG Indoor Cable

  • APPLICATION

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155

    Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s, 10 Gigabit Ethernet (10GBASE-T*), ATM LAN 1,2 Gbit/s

    INSTALLATION AND OPERATION CONDITIONS

    For stationary installation inside buildings, stations, structures and equipment in conditions of heightened electromagnetic impacts. Operated on frequencies up to 250 MHz.

    СOMPLIANCE WITH THE REQUIREMENTS

    System: ISO/IEC 11801, EN 50173-1, ANSI/TIA 568-С.2 Cable: IEC 61156-5

    Fire safety: IEC 60332-1, IEC 61034-1, IEC 60754-2

    CPR class: Eca

    MECHANICAL CHARACTERISTICS

    Тemperature range:

    During installation -10 °C … +60 °C / After installation -20 °C … +60 °C

    Bending radius:

    During installation ≥ 8 cable diameters / After installation ≥ 4 cable diameters

    Tensile stress ≤ 85 N

     

    ELECTRICAL CHARACTERISTICS AT 20 °C

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance
    Оhm/km
    ≤ 85

    Insulation resistance
    GOhm/km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,68

    Propagation delay
    ns/100 m
    ≤ 534+36/√f

    Delay shift on the frequency 100 MHz
    ns/100 m
    ≤ 30

    Characteristic impedance in the frequency range of: 1-100 MHz

    100-250 MHz
     

    Ohm
     

    100±15

    100±22

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20
    31,25

    Attenuation, dB, max
    2,1
    3,8
    6
    7,6
    8,5
    10,8

    NEXT, dB, min
    75,3
    66,3
    60,3
    57,3
    55,8
    52,8

    PS NEXT, dB, min
    72,3
    63,3
    57,3
    54,3
    52,8
    49,8

    ELFEXT, dB, min
    68
    56
    48
    44
    42
    38

    PS ELFEXT, dB, min
    65
    53
    45
    41
    39
    35

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0
    23,6

    Frequency, MHz
    62,5
    100
    125
    200
    250

    Attenuation, dB, max
    15,5
    19,9
    22,5
    29,1
    33

    NEXT, dB, min
    48,3
    45,3
    43,8
    40,8
    39,3

    PS NEXT, dB, min
    45,3
    42,3
    40,8
    37,8
    36,3

    ELFEXT, dB, min
    32
    28
    26
    22
    20

    PS ELFEXT, dB, min
    29
    25
    23
    19
    17

    RL, dB, min
    21,5
    20,1
    19,4
    18,0
    17,3

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT 6 F/UTP LSZH 4x2x23 AWG