Cables

Default sorting
Show
16

  • Specification:

    • Stable Transmission
    • 100% pass fluke test
    • Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the
    • Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network
    • Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
    • Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

     

    CAT5E UTP Patch Cord

    Catagory
    CAT5E

    Shieled
    NO

    Conductor Material
    Stranded Bare Copper

    Cable AWG
    26

    Construction(±0.01mm)
    7/0.16

    Connector
    8P8C UTP plug; 3μm gold plating

     

    Insulation
    Material
    PE

    Nom. Thickness(mm)
    0.14

    Diameter(±0.05mm)
    0.77

     

     

    Jacket
    Material
    PVC

    Nom. Thickness(mm)
    0.7

    Diameter(±0.30mm)
    5

    Color
    Light gray

    ELECTRICAL TEST
    100% OPEN,SHORT & MISS WIRE TEST

    CONDUCTOR RESISTANCE
    3~10 OHMS MAX.

    INSULATOR RESISTANCE
    5M OHMS MIN.

    HI-POT
    DC 300V 0.01sec

    Length
    0.5M/1M/2M/3M/5M (or customized length)

     

    CAT5 U/UTP Patch Cord

    • For 22-26AWG stranded and solid wire
    • Meet TIA/ EIA-568A and TIA/ EIA-568B CAT5E/ CAT6 Requirements
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • Good impact resistance
    • High and low temperature resistance
    • Stable transmission

    CAT5E F/UTP Modular Keystone Jack

    • For 22-26AWG stranded and solid wire
    • Impact resistant plastic
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • IDC modules fit Krone or 110 impact tools
    • Stable transmission

    CAT5E U/UTP Modular Keystone Jack

  • Specification:

    • With Cat5e keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT5E UTP Patch panel

    Shielded
    NO

    Port
    48-port

    Unit
    2U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure (not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Relative humidity
    85% (30℃)

    Operation temperature
    -20℃ to 60℃

    CAT5E U/UTP Patch Panel 48 Ports 2U

    • For 22-26AWG stranded and solid wire
    • Meet TIA/ EIA-568A and TIA/ EIA-568B CAT5E/ CAT6 Requirements
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • Good impact resistance
    • High and low temperature resistance
    • Stable transmission

    CAT6 F/UTP Modular Keystone Jack

  • Specification:

    • Stable Transmission
    • 100% pass fluke test
    • Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the cable.
    • Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network expansion.
    • Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
    • Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

     

    CAT6 FTP Patch Cord

    Catagory
    CAT6

    Shieled
    YES

    Conductor Material
    Stranded Bare Copper

    Cable AWG
    26

    Construction(±0.01mm)
    7/0.16

    Connector
    8P8C FTP plug; 3μm gold plating

     

    Insulation
    Material
    PE

    Nom. Thickness(mm)
    0.21

    Diameter(±0.05mm)
    0.9

     

     

    Jacket
    Material
    PVC

    Nom. Thickness(mm)
    0.55

    Diameter(±0.30mm)
    6

    Color
    Light gray

    ELECTRICAL TEST
    100% OPEN,SHORT & MISS WIRE TEST

    CONDUCTOR RESISTANCE
    3~10 OHMS MAX.

    INSULATOR RESISTANCE
    5M OHMS MIN.

    HI-POT
    DC 300V 0.01sec

    Length
    0.5M/1M/2M(or customized lenghth)

    CAT6 F/UTP Patch Cord

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 FTP Patch panel

    Shielded
    Yes

    Port
    24-port

    Unit
    1U

    Material
    –  Panel: 1.2mm SPCC with black color painting

    –  RJ45 Housing: PC

    –  RJ45 Contatt material and finished:

    Phosphor Bronze with 50-60 micro-inh Nickel plated Contact area: 3 micro-inch gold plating

    –  IDC house: PC, UL 94V-2 Krone

    –  IDC terminal material and finishing: phosphor bronze with 50 micro-inch tin-lead plated; over 50-60 micro inch nikel plating

    –  PCB: FR4 UL94VO

    IDC Accept
    22-26 AWG Stranded and solid wire

    Retention strength
    7.7 kgs between jack and plug

    Insertion force
    900 grms for 8 contacts

    Durability
    Jack: 750 cycles plug-jack mating and unmating test Inseration cycles at 20 cycles/min max.

    Contact resistance test per 100 cycles IDC: Max. 200 punching time

    Operating temperature
    -40~+70 °C

    CAT6 F/UTP Patch Panel 24 Ports 1U

    • For 22-26AWG stranded and solid wire
    • Impact resistant plastic
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • IDC modules fit Krone or 110 impact tools
    • Stable transmission

    CAT6 U/UTP Modular Keystone Jack

  • Specification:

    • Stable Transmission
    • 100% pass fluke test
    • Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the
    • Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network
    • Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
    • Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

     

    CAT6 UTP Patch Cord

    Catagory
    CAT6

    Shieled
    NO

    Conductor Material
    Stranded Bare Copper

    Cable AWG
    26

    Construction(±0.01mm)
    7/0.16

    Connector
    8P8C UTP plug; 3μm gold plating

     

    Insulation
    Material
    PE

    Nom. Thickness(mm)
    0.17

    Diameter(±0.05mm)
    0.88

     

     

    Jacket
    Material
    PVC

    Nom. Thickness(mm)
    0.7

    Diameter(±0.30mm)
    6

    Color
    Light gray

    ELECTRICAL TEST
    100% OPEN,SHORT & MISS WIRE TEST

    CONDUCTOR RESISTANCE
    3~10 OHMS MAX.

    INSULATOR RESISTANCE
    5M OHMS MIN.

    HI-POT
    DC 300V 0.01sec

    Length
    0.25M/0.5M/1M/2M(or customized lenghth)

    CAT6 U/UTP Patch Cord

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 UTP Patch panel

    Shielded
    NO

    Port
    24-port

    Unit
    1U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure (not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Back wave loss
    ≧34dB (1≦f<100MHZ)

    Relative humidity
    85% (30℃)

    Min near end cros talk loss 100MHZ
    ≧43dB (100MHZ)

    Min far end cros talk loss 100MHZ
    ≧35.3dB (100MHZ)

    Operation temperature
    -20℃ to 60℃

     

    CAT6 U/UTP Patch Panel 24 Ports 1U

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 UTP Patch panel

    Shielded
    NO

    Port
    48-port

    Unit
    2U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure(not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Back wave loss
    ≧34dB (1≦f<100MHZ)

    Relative humidity
    85% (30℃)

    Min near end cros talk loss 100MHZ
    ≧43dB (100MHZ)

    Min far end cros talk loss 100MHZ
    ≧35.3dB (100MHZ)

    Operation temperature
    -20℃ to 60℃

    CAT6 U/UTP Patch Panel 48 Ports 2U

  • This EZ-RJ45 connector allows the technician to easily verify the proper wiring order, allowing the wires to be inserted through the connector and out the front.

    • Stable transmission
    • Environmentally friendly PC material
    • 3μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6 UTP EZ RJ45 Connector

    • Stable transmission
    • Environmentally friendly PC material
    • 3μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6 UTP JACK RJ45 Connector

  • Description

    • Stable transmission
    • Environmentally friendly PC material
    • 50μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6/CAT7 RJ45 FTP Connector for 22-23 AWG

    • Impendance: 75+/-3 Ohm
    • Capacity: 55+/-3 pF/m
    • Velocity ratio: 80 %
    • DC resistance (20 ºC) Conductor: 63,1 Ohm/km
      Outer shield: 40,6 Ohm/km
    • Attenuation (20 ºC): 5 MHz 2,62 dB/100 m
      50 MHz 8,40 dB/100 m
      200 MHz 16,87 dB/100 m
      470 MHz 25,97 dB/100 m
      500 MHz 26,80 dB/100 m
      862 MHz 35,32 dB/100 m
      1000 MHz 38,09 dB/100 m
    • Return loss at: 30-470 MHz dB >20
      470-862 MHz dB >23
      862-2150 MHz dB  >18
    • Screening efficiency: 5-10 MHz dB >70
      10-30 MHz dB >80
      30-1000 MHz dB >85

    CCTV Cable 1+2 Mini U4 2×0,50 500M

    • Impendance: 75+/-3 Ohm
    • Capacity: 55+/-3 pF/m
    • Velocity ratio: 80 %
    • DC resistance (20 ºC) Conductor: 63,1 Ohm/km
      Outer shield: 40,6 Ohm/km
    • Attenuation (20 ºC): 5 MHz 2,62 dB/100 m
      50 MHz 8,40 dB/100 m
      200 MHz 16,87 dB/100 m
      470 MHz 25,97 dB/100 m
      500 MHz 26,80 dB/100 m
      862 MHz 35,32 dB/100 m
      1000 MHz 38,09 dB/100 m
    • Return loss at: 30-470 MHz dB >20
      470-862 MHz dB >23
      862-2150 MHz dB  >18
    • Screening efficiency: 5-10 MHz dB >70
      10-30 MHz dB >80
      30-1000 MHz dB >85

    CCTV Cable 1+4 Mini U4 2×0,50 500M

  • Electric parameters:

    Impedance

    Ohm
    75+/-3

    Capacity

    pF/m
    54.5+/-3

    Velocity ratio

    %
    85

    DC resistance (20 ºC)
    Conductor
    Ohm/km
    35.5

    Outer shield
    Ohm/km
    31

    Attenuation (20 ºC)
    1 MHz
    db/100 m
    0.87

    5 MHz
    db/100 m
    1.98

    10 MHz
    db/100 m
    2.79

    50 MHz
    db/100 m
    6.25

    100 MHz
    db/100 m
    8.91

    200 MHz
    db/100 m
    12.9

    300 MHz
    db/100 m
    15.83

    470 MHz
    db/100 m
    19.41

    862 MHz
    db/100 m
    26.14

    1000 MHz
    db/100 m
    28.92

    1350 MHz
    db/100 m

    1750 MHz
    db/100 m

    2150 MHz
    db/100 m

    Return loss at
    30-470 MHz
    db
    >23

    470-862 MHz
    db
    >20

    682-2150 MHz
    db
    >18

    Screening efficiency
    5-10 MHz
    db
    >55

    10-30 MHz
    db
    >60

    30-1000 MHz
    db
    >65

    Construction:

    Material conductor

    Bare copper

    Diameter conductor
    mm
    0.8

    Material dielectric

    FHDPE

    Diameter dielectric
    mm
    3,7±0,15

    Typf of foil

    Al/Pet/Al

    Braiding material

    AM (aluminium)

    Braid coverage
    %
    67

    Power wires

    Copper (2 x 0,75 mm2)

    Outer jacket

    PVC

    Diameter sheath
    mm
    6.1/12.0

    Min. Setting radius
    mm
    35

    CCTV Cable RG59 1+2 2×0,75 outdoor 500m

  • Coaxial Cable RG6/U6 indoor 500m/100m

  • Electric parameters:

    Impendance

    Ohm
    75+/-2

    Capacity

    pF/m
    54,5+/-3

    Velocity ratio

    %
    85

    DC resistance (20 ºC)
    Conductor
    Ohm/km
    22,5

    Outer shield
    Ohm/km
    24,0

    Attenuation (20 ºC)
    1 MHz
    dB/100 m
    0,68

    5 MHz
    dB/100 m
    1,53

    10 MHz
    dB/100 m
    2,17

    50 MHz
    dB/100 m
    4,85

    100 MHz
    dB/100 m
    6,87

    200 MHz
    dB/100 m
    9,74

    300 MHz
    dB/100 m
    11,95

    470 MHz
    dB/100 m
    14,98

    862 MHz
    dB/100 m
    20,37

    1000 MHz
    dB/100 m
    21,97

    1350 MHz
    dB/100 m

    1750 MHz
    dB/100 m

    2150 MHz
    dB/100 m

    Return loss at
    30-470 MHz
    dB
    >23

    470-862 MHz
    dB
    >20

    862-2150 MHz dB
    dB
    >18

    Screening efficiency
    5-10 MHz dB
    dB
    >75

    10-30 MHz dB
    dB
    >85

    30-1000 MHz dB
    dB
    >90

     

    Construction:

    Material conductor

    Bare copper

    Diameter conductor
    Ø
    mm
    1,02

    Material dielectric

    FHDPE

    Diameter dielectric
    Ø
    mm
    4,3±0,15

    Type of foil

    Al/Pet/Al

    Braiding material

    Annealed tinned copper

    Braid coverage

    %
    60

    Power wires

    Copper (2 x 0,75 mm2)

    Outer jacket

    PVC

    Diameter sheath
    Ø
    mm
    6,8/15,6

    Min. Setting radius

    mm
    50

    Coaxial Cable RG6/U6 Outdoor

  • Fiber Optic Cable 50/125 outdoor Multi Mode

  • Technical characteristics

    1) The unique extruding technology provides the fibers in the tube with good flexibility and bending endurance

    2) The unique fiber excess length control method provides the cable with excellent mechanical and environmental properties Multiple water blocking material filling provides dual water blocking function

    Construction:

    1. Fiber single mode G652D
    2. Gel core filling
    3. Center strength member FRP
    4. Multi Loose tube
    5. Fastening winding of threads and tapes.
    6. 0MM*7pcs Stranded galvanize messenger wire
    7. MDPE sheath

     

    Fiber count
    12
    24
    48
    96

    No of loose tube/filler
    2/3
    4/1
    6
    8

    Fiber No. per tube
    6
    6
    8
    12

    Loose tube diameter
    1.6±0.1mm

    Center strength member
    Steel wire 1.6±0.1mm

    Outer sheath thickness
    1.5±0.1mm

    Messenger wire
    1.0MM*7pcs galvanized steel

    Water proof type
    Gel filled

    Outer sheath material
    MDPE

    Cable OD mm
    8.0*15.0MM±0.2mm

    Cable weight
    110KG/KM

    Tensile
    4KN

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40 ℃ to + 70 ℃

    Transport and storage temperature range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Aerial 9/125 outdoor multi tube

  • Fiber count
    2
    4
    6
    8
    12

    Max. No of loose tube
    1

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter
    2.0±0.1mm

    Outer sheath thickness
    1.6±0.1mm

    Messenger wire
    1.0MM*7pcs galvanized steel

    Outer sheath material
    HDPE

    Cable OD mm
    10.6-11MM *5.0-5.2MM

    Cable weight
    66KG/KM

    Tensile
    3KN

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40 ℃ to + 70 ℃

    Transport and storage temperature

    range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Aerial 9/125 outdoor Multi-tube

  • Fiber count
    2
    4
    6
    8
    12

    Max. No of loose tube
    1

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter
    2.0±0.1mm

    Outer sheath thickness
    1.6±0.1mm

    Messenger wire
    1.0MM*7pcs galvanized steel

    Outer sheath material
    HDPE

    Cable OD mm
    10.6-11MM *5.0-5.2MM

    Cable weight
    66KG/KM

    Tensile
    3KN

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40 ℃ to + 70 ℃

    Transport and storage temperature

    range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Aerial 9/125 outdoor Uni-tube

  • Technical characteristics

    1) The unique extruding technology provides the fibers in the tube with good flexibility and bending endurance

    2) The unique fiber excess length control method provides the cable with excellent mechanical and environmental properties Multiple water blocking material filling provides dual water blocking function

     

    Construction:

    1. Fiber single mode G652D
    2. Gel core filling
    3. Center strength member steel wire
    4. Multi Loose tube
    5. Corrugated steel armor
    6. Cable jelly
    7. Red rip cord
    8. PE sheath

     

    Fiber count
    24

    Max. No of loose tube/ filler
    4/1

    Fiber No. per tube
    6

    Center strength member
    Steel wire 1.4±0.1MM

    Loose tube diameter
    1.7±0.1mm

    Armored
    Corrugated steel

    Water proof type
    Gel filled

    Outer sheath thickness
    1.5±0.1mm

    Outer sheath material
    HDPE

    Cable OD mm
    8.8±0.2MM

    Cable weight
    82KG±5/KM

    Tensile
    4KN

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40    ℃ to + 70 ℃

    Transport and storage temperature

    range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9/125 outdoor multi tube

  • Optics Specifications

    Attenuation(dB/km)
    @1310nm
    ≤0.34db/km

    @1383nm (after hydrogen aging)
    ≤0.32db/km

    @1550nm
    ≤0.20db/km

    @1625nm
    ≤0.24db/km

    Dispersion
    @1285nm~1340nm
    -3.0~3.0ps/(nm*km)

    @1550nm
    ≤18ps/(nm*km)

    @1625nm
    ≤22ps/(nm*km)

    Zero-Dispersion wavelength
    1300~1324nm

    Zero-Dispersion slope
    ≤0.092ps/(nm2*km)

    Mode field diameter @ 1310nm
    9.2±0.4μm

    Mode field diameter @ 1550nm
    10.4±0.8μm

    PMD
    Max. value for fiber on the reel
    0.2ps/km 1/2

    Max. Designed value for link
    0.08ps/km 1/2

    Cable cutoff wavelength,λ cc
    ≤1260nm

    Effective group index(Neff)@1310nm
    1.4675

    Effective group index(Neff)@1550nm
    1.4680

    Macro-bend loss(Φ60mm,100 turns)@1550nm
    ≤0.05db

    Back scatter characteristic(@1310nm&1550nm)

    Point discontinuity
    ≤0.05db

    Attenuation uniformity
    ≤0.05db/km

    Attenuation coefficient difference for bi-directional measurement
    ≤0.05db/km

    Geometrical characteristics

    Cladding diameter
    125±1μm

    Cladding non-circularity
    ≤1%

    Core/cladding concentricity error
    ≤0.4μm

    Fiber diameter with coating(uncolored)
    245±5μm

    Cladding/coating concentricity error
    ≤12.0μm

    Curl
    ≥4m

    Mechanical characteristic

    Proof test
    0.69GPa

    Coating strip force(typical value)
    1.4N

    Dynamic stress corrosion susceptibility parameter(typical value)
    ≥20

    Environmental characteristics(@1310nm&1550nm)

    Temperature induced attenuation(-60~+85℃)
    ≤0.5dB/km

    Dry heat induced attenuation(85±2℃,30days)
    ≤0.5dB/km

    Water immersion induced attenuation(23±2℃,30days)
    ≤0.5dB/km

    Damp heat induced attenuation(85±2℃,RH85%,30days)
    ≤0.5dB/km

     

     

    Fiber count
    2
    4
    6
    8
    12

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter/Material
    2.2+0.2mm/PBT

    Outer sheath thickness &Material
    1.5-1.8mm   HDPE

    Strength member
    Steel tape +Two steel wire

    Cable overall diameter
    8.5±0.2mm

    Cable weight
    Approx 65 kg/km

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40   ℃ to + 70 ℃

    Transport and storage temperature

    range
    – 40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    2000N

    Crush resistance
    Short term :2200N/100MM    Long term:

    1100N/100MM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9125 outdoor Multi-tube

  • Optics Specifications

    Attenuation(dB/km)
    @1310nm
    ≤0.34db/km

    @1383nm (after hydrogen aging)
    ≤0.32db/km

    @1550nm
    ≤0.20db/km

    @1625nm
    ≤0.24db/km

    Dispersion
    @1285nm~1340nm
    -3.0~3.0ps/(nm*km)

    @1550nm
    ≤18ps/(nm*km)

    @1625nm
    ≤22ps/(nm*km)

    Zero-Dispersion wavelength
    1300~1324nm

    Zero-Dispersion slope
    ≤0.092ps/(nm2*km)

    Mode field diameter @ 1310nm
    9.2±0.4μm

    Mode field diameter @ 1550nm
    10.4±0.8μm

    PMD
    Max. value for fiber on the reel
    0.2ps/km 1/2

    Max. Designed value for link
    0.08ps/km 1/2

    Cable cutoff wavelength,λ cc
    ≤1260nm

    Effective group index(Neff)@1310nm
    1.4675

    Effective group index(Neff)@1550nm
    1.4680

    Macro-bend loss(Φ60mm,100 turns)@1550nm
    ≤0.05db

    Back scatter characteristic(@1310nm&1550nm)

    Point discontinuity
    ≤0.05db

    Attenuation uniformity
    ≤0.05db/km

    Attenuation coefficient difference for bi-directional measurement
    ≤0.05db/km

    Geometrical characteristics

    Cladding diameter
    125±1μm

    Cladding non-circularity
    ≤1%

    Core/cladding concentricity error
    ≤0.4μm

    Fiber diameter with coating(uncolored)
    245±5μm

    Cladding/coating concentricity error
    ≤12.0μm

    Curl
    ≥4m

    Mechanical characteristic

    Proof test
    0.69GPa

    Coating strip force(typical value)
    1.4N

    Dynamic stress corrosion susceptibility parameter(typical value)
    ≥20

    Environmental characteristics(@1310nm&1550nm)

    Temperature induced attenuation(-60~+85℃)
    ≤0.5dB/km

    Dry heat induced attenuation(85±2℃,30days)
    ≤0.5dB/km

    Water immersion induced attenuation(23±2℃,30days)
    ≤0.5dB/km

    Damp heat induced attenuation(85±2℃,RH85%,30days)
    ≤0.5dB/km

     

     

    Fiber count
    2
    4
    6
    8
    12

    Fiber No. per tube
    2
    4
    6
    8
    12

    Loose tube diameter/Material
    2.2+0.2mm/PBT

    Outer sheath thickness &Material
    1.5-1.8mm   HDPE

    Strength member
    Steel tape +Two steel wire

    Cable overall diameter
    8.5±0.2mm

    Cable weight
    Approx 65 kg/km

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40   ℃ to + 70 ℃

    Transport and storage temperature

    range
    – 40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    2000N

    Crush resistance
    Short term :2200N/100MM    Long term:

    1100N/100MM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Armoured 9125 outdoor Uni-tube

  • Fiber count
    2-8
    12

    Fiber type
    Single Mode G652D

    Max. No of loose tube
    1

    Fiber No. per tube
    2-8
    12

    Loose tube diameter
    1.6mm
    2.0mm

    Outer sheath thickness
    1.5mm

    FRP Strength member
    0.8mm
    1.0mm

    Outer sheath
    HDPE

    Cable OD mm
    4.6±0.2mm
    5.8±0.2mm

    Cable weight kg/km
    19
    30

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40  ℃ to + 70 ℃

    Transport and storage temperature range
    -40 ℃ to + 70 ℃

    Allowable Tensile Load(N)
    Short term:1500  Long term:600

    Crush resistance
    1000 N/10cm    2200N/10CM

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

     

    Fiber Optic Cable SM 9125 outdoor

  • Fiber count: 1/2/4
    Color of fiber: Blue, Orange, Green, Brown, Grey
    Fiber Type: G657A2
    Strength member: Steel wire/FRP
    Supporting messenger wire: 1.0MM*x1 steel wire
    Outer sheath: LSZH Lower smoke zero halogen frame retardant & UV Anti
    Cable Diameter dimensions: 2.0( Height) × 5.0W ± 0.1 mm(width)
    Operation temperature range: -20 ℃ to + 70 ℃
    Installation temperature range: -20 ℃ to + 60 ℃
    Transport and storage temperature range: -20 ℃ to + 70 ℃
    Tension Load (N): Short term :800N Long term :500N
    Crush Load(N): Long term 1000 N/100mm Short term:2200N/100mm
    Minimal installation bending radius: 30 x OD
    Minimal operation bending radius: 15 x OD
    Cable marking: The marking length 1meter apart , as required

     

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees
     
    ≥4.0
    ≥4.0

    Cladding diameter
     
    125 ± 0.7
    125 ± 0.7

    Core/package concentricity
     
    ≤0.5
    ≤0.5

    Cladding non-circularity
     
    ≤1.0%
    ≤1.0%

    Coating diameter
     
    243± 5
    243± 5

    Coating concentricity
     
    ≤8
    ≤8

    Coating roundness
     
    ≤3%
    ≤3%

    Mechanical property
    Strain
     
    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

     
    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd
     
    ≥ 22
    ≥ 22

    Coating peak stripping force N
     
    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，
    ≤ 0.05
    ≤ 0.05

     
    1550nm, 1625 nm
     
     

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO1 Aerial outdoor G657A2

  • The typical bow-type drop optical cable includes central optical fibers with 2 Steel wire as the strength members placed on both sides, a LSZH sheath is extruded outside.

    Fiber Optical

    Fiber count
    1/2

    Color Of  fiber
    Blue Orange

    Fiber  Type
    G657A2

    Strength member
    Galvanized steel wire

    Outer sheath
    LSZH(white)

    Cable Diameter dimensions
    2.0( Height) × 3.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -0  ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    G657A2 fiber

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees

    ≥4.0
    ≥4.0

    Cladding diameter

    125 ± 0.7
    125 ± 0.7

    Core/package concentricity

    ≤0.5
    ≤0.5

    Cladding non-circularity

    ≤1.0%
    ≤1.0%

    Coating diameter

    243± 5
    243± 5

    Coating concentricity

    ≤8
    ≤8

    Coating roundness

    ≤3%
    ≤3%

    Mechanical property
    Strain

    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd

    ≥ 22
    ≥ 22

    Coating peak stripping force N

    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental

    performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

     

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，

    1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO1 SM indoor G657A2

  • Fiber Optic DROP Cable FO2 Aerial outdoor G657A

  • The typical bow-type drop optical cable includes central optical fibers with 2 Steel wire as the strength members placed on both sides, a LSZH sheath is extruded outside.

    Fiber Optical

    Fiber count
    1/2

    Color Of fiber
    Blue Orange

    Fiber Type
    G657A2

    Strength member
    Galvanized steel wire

    Outer sheath
    LSZH(white)

    Cable Diameter dimensions
    2.0( Height) × 3.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -0 ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    G657A2 fiber

    Category
    Description
    G657A2/B2

    Optical
    transmission
    performance
    Attenuation coefficient
    1310nm
    ≤0.35

    1383nm
    ≤0.35

    1550nm
    ≤0.21

    1625nm
    ≤0.23

    Attenuation inhomogeneity
    1310nm, 1550nm
    ≤0.05

    Attenuation discontinuity
    1310nm, 1550nm
    ≤0.05

    Wavelength attenuation
    characteristics
    1228 ~ 1330nm
    ≤0.05

    1525 ~ 1575nm
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength nm
    1300~1324

    Zero dispersion slope
    ≤0.092

    1288~1339nm
    ≤3.5

    1271~1360nm
    ≤5.3

    1550nm
    ≤18

    1625nm
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1

    Fiber cutoff wavelength
    ≤1260

    Macro bending loss
    （10 laps，30mm）
    1550nm
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤0.2

    （1 lap，15mm）
    1550nm
    ≤0.5

    （1 lap，15mm）
    1625nm
    ≤1.0

    Mode field diameter
    1310nm
    8.6±0.4

    Dimension
    parameter
    Warp degrees

    ≥4.0

    Cladding diameter

    125 ± 0.7

    Core/package concentricity

    ≤0.5

    Cladding non-circularity

    ≤1.0%

    Coating diameter

    243± 5

    Coating concentricity

    ≤8

    Coating roundness

    ≤3%

    Mechanical
    property
    Strain

    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76

    50% Weber fracture probability
    3.45

    Fatigue parameters Nd

    ≥ 22

    Coating peak stripping force N

    1.0~8.9

    Coating average stripping force N

    1.0~5.0

    Environmental
    performance
    Additional damping temperature cycle (-60℃ ～ +85℃)
    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm, 1550nm, 1625 nm
    ≤ 0.05

    High temperature aging(85±2℃，30 days ) dB/km @1310nm, 1550nm, 1625 nm
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km
    @1310nm，1550nm, 1625 nm
    ≤ 0.05

     

    Fiber Optic DROP Cable FO2 SM indoor G657A2

  • Fiber count
    1/2/4

    Color Of fiber
    Blue Orange Green Brown Grey

    Fiber Type
    G657A2

    Strength member
    Steel wire/FRP

    Supporting messenger wire
    1.0MM*x1 steel wire

    Outer sheath
    LSZH Lower smoke zero halogen frame retardant & UV Anti

    Cable Diameter dimensions
    2.0( Height) × 5.0W ± 0.1 mm(width)

    Operation temperature range
    -20 ℃ to + 70 ℃

    Installation temperature range
    -20 ℃ to + 60 ℃

    Transport and storage temperature range
    -20 ℃ to + 70 ℃

    Tension Load (N)
    Short term :800N  Long term :500N

    Crush Load(N)
    Long term 1000 N/100mm  Short term:2200N/100mm

    Minimal installation bending radius
    30 x OD

    Minimal operation bending radius
    15 x OD

    Cable marking
    The marking length 1meter apart , as required

     

    Category
    Description
    G657A1
    G657A2/B2

    Standard
    Standard

    Optical transmission performance
    Attenuation coefficient
    1310nm
    ≤0.35
    ≤0.35

    1383nm
    ≤0.35
    ≤0.35

    1550nm
    ≤0.21
    ≤0.21

    1625nm
    ≤0.23
    ≤0.23

    Attenuation inhomogeneity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Attenuation discontinuity
    1310nm、1550nm
    ≤0.03
    ≤0.05

    Wavelength attenuation

    characteristics
    1288~1330nm
    ≤0.05
    ≤0.05

    1525~1575nm
    ≤0.05
    ≤0.05

    Dispersion characteristic
    The zero dispersion wavelength

    nm
    1300~1324
    1300~1324

    Zero dispersion slope
    ≤0.092
    ≤0.092

    1288~1339nm
    ≤3.5
    ≤3.5

    1271~1360nm
    ≤5.3
    ≤5.3

    1550nm
    ≤18
    ≤18

    1625nm
    ≤22
    ≤22

    The polarization mode dispersion of the fiber
    ≤0.1
    ≤0.1

    Fiber cutoff wavelength
    ≤1260
    ≤1260

    Macro bending loss

    （10 laps，30mm）
    1550nm
    ≤0.2dB
    ≤0.03

    （10 laps，30mm）
    1625nm
    ≤0.5dB
    ≤0.1

    （1 lap，20mm）
    1550nm
    ≤0.3dB
    ≤0.1

    （1 lap，20mm）
    1625nm
    ≤1.0dB
    ≤0.2

    （1 lap，15mm）
    1550nm
    –
    ≤0.5

    （1 lap，15mm）
    1625nm
    –
    ≤1.0

    Mode field diameter
    1310nm
    8.8±0.4
    8.6±0.4

    Dimension parameter
    Warp degrees
     
    ≥4.0
    ≥4.0

    Cladding diameter
     
    125 ± 0.7
    125 ± 0.7

    Core/package concentricity
     
    ≤0.5
    ≤0.5

    Cladding non-circularity
     
    ≤1.0%
    ≤1.0%

    Coating diameter
     
    243± 5
    243± 5

    Coating concentricity
     
    ≤8
    ≤8

    Coating roundness
     
    ≤3%
    ≤3%

    Mechanical property
    Strain
     
    ≥1.05%
    ≥1.05%

    Tensile strength(10m)
    15% Weber fracture probability
    2.76
    2.76

     
    50% Weber fracture probability
    3.45
    3.45

    Fatigue parameters Nd
     
    ≥ 22
    ≥ 22

    Coating peak stripping force N
     
    1.0~8.9
    1.0~8.9

    Coating average stripping force N
    1.0~5.0
    1.0~5.0

    Environmental performance
    Additional damping temperature cycle (-60℃ ～ +85℃)

    dB/km@1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Wet and heat aging (+85±2℃, 85%RH，30 days) dB/km@1310nm，
    ≤ 0.05
    ≤ 0.05

     
    1550nm, 1625 nm
     
     

    High temperature aging(85±2℃，30 days ) dB/km @1310nm，1550

    nm, 1625 nm
    ≤ 0.05q
    ≤ 0.05

    Additional attenuation of flooding (23±2℃，30 days ) dB/km

    @1310nm，1550nm, 1625 nm
    ≤ 0.05
    ≤ 0.05

    Fiber Optic DROP Cable FO4 Aerial outdoor G657A