-
- 8 channels XLR/TRS input
- 48V Phantom POWER
- 3 section EQ for each channels
- USB input
- Built‐in 16 effects
- Built‐in 5 section EQ
- Built‐in Power supply
- BlueTooth
- Bulit‐in power amplifier of 2*250W@8ohm 2*300W@4ohm
SH-MX8 Mixer
-
- Case: Black color, aluminium case
- Functions: Independent zone broadcasting (required SH‐MIC5Z remote paging console)
- Features: Mic input: x4 (24V phantom power on/off)
- Mic 1 Priority: Yes
- AUX input: x2
- Remote paging controle input: Yes (suitable with SH‐MIC5Z)
- Line output: x1
- EMC input: x1 (suitable with SH‐AP1CH)
- Prerecorded Alarm voice: Yes
- Adjustment: Zones independed volume control, MIC 1‐4, AUX 1, AUX 2,
- Zone(s): 5
- Output types: 4Ω, 8Ω / 70V / 100V
- Max. output power: 350W
- Safety: Output Short Circuit, Overheat, Overload protection
- Rackmount design: Yes
- Power consumption: AC 220V‐240V/50Hz‐60Hz
- Dimensions: 484*450*132mm
SH-SG5Z350W Amplifier
-
- Case: Black color, aluminium case
- Functions: FM, USB, Bluetooth
- Mic input: x1
- Mic 1 Priority: Yes
- AUX input: x1
- AUX output: x1
- Adjustment: MIC, AUX, MP3 (USB, Bluetooth), Bass, Treble
- Zone(s): 1
- Output types: 4‐16Ω/100V
- Max. output power: 40W
- IR remote control: Yes
- Safety: Output Short Circuit, Overheat, Overload protection
- Rackmount design: No
- Power consumption: AC 220V‐240V/50Hz‐60Hz
- Dimensions: 260x200x65mm
SH-SG40W Mixer
-
- Case: Black color, aluminium case
- Functions: FM, USB, SD card, Bluetooth
- Mic input: x1
- Mic 1 Priority: Yes
- AUX input: x1
- AUX output: x1
- Adjustment: MIC, Echo, AUX, MP3 (USB, FM, Bluetooth), Bass, Treble
- Zone(s): 1
- Output types: 4‐16Ω /100V
- Max. output power: 80W
- IR remote control: Yes
- Safety: Output Short Circuit,
- Overheat, Overload protection
- Rackmount design: No
- Power consumption: AC 220V‐240V/50Hz‐60Hz
- Dimensions: 361*216*67mm
SH-SG80W Amplifier
-
- Case: Black color, aluminium case
- Functions: USB, SD card, Bluetooth
- Features: Chime
- Mic input: x1
- Mic 1 Priority: Yes
- AUX input: x2
- Line output: x1
- Adjustment: Zones independed volume control, MIC 1, MIC 2, AUX 1, AUX 2, MP3 (USB, Bluetooth), Bass, Treble
- Zone(s): 5 | Output types: 4‐16Ω / 70V / 100V
- Max. output power: 130W
- Safety: Output Short Circuit, Overheat, Overload protection
- Rackmount design: Yes
- Power consumption: AC 220V‐240V/50Hz‐60Hz
- Dimensions: 484*343*88mm
SH-SG130W Mixer
-
- Case: Black color, aluminium case
- Functions: USB, SD card, Bluetooth
- Features: Chime
- Mic input: x1
- Mic 1 Priority: Yes
- AUX input: x2
- Line output: x1
- EMC input: x1
- Prerecorded Alarm voice: Yes
- Adjustment: Zones independent volume control, MIC 1, MIC 2, AUX 1, AUX 2, MP3 (USB, Bluetooth), Bass, Treble
- Zone(s): 5
- Output types: 4‐16Ω / 70V / 100V
- Max. output power: 320W
- Safety: Output Short Circuit, Overheat, Overload protection
- Rackmount design: Yes
- Power consumption: AC 220V‐240V/50Hz‐60Hz
- Dimensions: 484*343*88mm
SH-SG320W Mixer
-
- Case: Black color, aluminium case
- Functions: USB, Bluetooth
- Mic input: x1
- Mic 1 Priority: Yes
- AUX input: x2
- Line output: x1
- EMC input: x1
- Prerecorded Alarm voice: Yes
- Adjustment: Zones independed volume control, MIC 1, MIC 2, AUX 1, AUX 2, MP3 (USB, Bluetooth), Bass, Treble
- Zone(s): 5
- Output types: 4‐16Ω / 70V / 100V
- Max. output power: 650W
- Safety: Output Short Circuit, Overheat, Overload protection
- Rackmount design: Yes
- Power consumption: AC 220V‐240V/50Hz‐60Hz
- Dimensions: 483*310*90mm
SH-SG650W Mixer
-
- Power on/off button
- Capsule type: Condenser
- Frequency response: 40Hz~16Khz
- Pattern: Ultra‐cardioid
- Output impedance: 200 Ohm
- Reference sound receiving distance 20~50sm
- Balanced output
- DC 9V
SH-MIC1CM Microphone
-
- Wall mount type
- ABS casing
- ABS crust
- White color
- Driver size: 4″
- Tweeter size: 1.5″
- Power Taps @100V: 10W
- Frequency response 170‐18000Khz
- Mounting type: bracket
- Mounting position: vertical, horizontal
- Cable connection type – socket
- Dimensions (WxDxH): W:160x140x220
SH-KD415PA Loudspeaker
-
- Wall mount type
- ABS casing
- ABS crust
- Black color
- Driver size: 4″
- Tweeter size: 1.5″
- Power Taps @100V: 10W
- Frequency response 170‐18000Khz
- Mounting type: bracket
- Mounting position: vertical, horizontal
- Cable connection type – socket
- Dimensions (WxDxH): W:160x140x220
SH-KD415PQ Loudspeaker
-
- Tunnel dimensions 500 (Width) * 300 (Height) mm
- Inspection speed: 22 cm / s
- Maximum load capacity: 100kg
- Differentiation: <0.101mm metal wire
- Conductivity (guaranteed): 8mm steel, normally 10mm
- Monitor 19”
- Pseudocolor Image
SH-5030A X-Ray Scanner
-
Input:
- Capacity: 10000 VA / 8000 W
- Voltage: 208/220/230/240 VAC
- Voltage range: 110-300 VAC ± 3% at 50% load / 176-300 VAC ± 3% at 100% load
- Frequency range: 46~54 or 56~64 Hz
- Power factor: ≥ 0.99 @ nominal voltage (100% load)
Output:
- Output voltage: 208/220/230/240 VAC
- Voltage regulation : ± 1%
- Frequency range: 46~54 or 56~64 Hz
- Frequency range(Batt. Mode): 50 Hz ±0.1 Hz or 60 Hz ±0.1 Hz
- Current crest ratio: 3:1
- Harmonic distortion(Linear load): ≤ 3% THD
- Harmonic distortion(non-linear load): ≤ 5% THD
- Transfer time: 0 ms
- Waveform (Batt. Mode): pure sinewave
Efficiency:
- AC mode: 93%
- Battery mode: 91%
Battery:
- Battery type & number: 12 V/9 Ah
- Numbers:16/20
- Typical recharge time: 9 hours recover to 90% capacity
- Charging current: 1A/2A (adjustable)
Indicators:
- LCD Panel: UPS status, load level, battery level, input/output voltage, discharge timer, fault conditions
Alarm:
- Battery mode: Sounding every 4 seconds
- Low battery Sounding every second
- Overload: Sounding every 0.5 second
- Fault: Continuously sounding
Physical:
- Dimension: D x W x H (mm)(UPS unit): 580 x 438 x 133(3U)
- Dimension: D x W x H (mm)(battery pack): 580 x 438 x 133(3U)
- Net weight (kgs)(UPS unit): 18
- Net weight (kgs)(battery pack): 61
Environment:
- Humidity: 0-95 % RH @ 0-40°C (non-condensing)
- Noise level: less than 58 dB
Management: - Smart RS-232 / USB: Supports Windows®️ 2000/2003/XP/Vista/2008/Windows®️7/8, Linux, MAC
- Optional SNMP: Power management from SNMP manager and web browser
Winner Pro 10K(L) Online UPS
- Capacity: 10000 VA / 8000 W
-
APPLICATION:
- PBX
- V.11
- X.21
- ISDN
- Ethernet (10Base-T)
- ATM-25/52/155 Mbit/s
- 100VG-AnyLAN
- Token Ring 16/100 Mbit/s
- Fast Ethernet (100BASE-TX)
- 1000BASE-T
- 2.5GBASE-T
- 5GBASE-T
- PoE
- PoE+
- 4PPoE
DESIGN:
- Conductor: solid annealed copper
- Insulation: PE
- Pair: two conductors twisted:
- Cross-web: HDPE, 2,6×2,6 mm
- Jacket: LS0H, nominal thickness 0,5 mm; PVC, nominal thickness 0,5 mm
- STANDARDS:
- Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568.2-D
- Cable: IEC 61156-5, EN 50288-6-1
- Fire safety:LS0H jacket: EN 60332-1-2
- CPR class: Eca
- MECHANICAL CHARACTERISTICS:
- Temperature range:
– During installation -10 °C … +60 °C
– After installation -20 °C … +60 °C - Bending radius:- During installation ≥ 8 cable diameters- After installation ≥ 4 cable diameters
- Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
- Capacitance: pF/m ≤ 56
- Direct current resistance for conductors TPG(0,52; 0,54 mm; 0,57 mm): Оhm/km ≤ 75-82-87
- Resistance unbalance: % 2
- Insulation resistance: GOhm/km ≥ 5
- Signal propagation velocity: % 68
- Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
- Test voltage between cores, (DC, 2 s): kV 2,5
LAN Cable CAT 6 U/UTP LSZH 4x2x23 AWG Indoor Cable
-
APPLICATION:
- PBX
- V.11
- X.21
- ISDN
- Ethernet (10Base-T)
- ATM-25/52/155 Mbit/s
- 100VG-AnyLAN
- Fast Ethernet (100BASE-TX)
- Token Ring 16/100 Mbit/s
- Firewire 100 Mbit/s
- PoE (IEEE 802.3af)
- PoE+ (IEEE 802.3at)
- PoE++ (IEEE 802.3bt)
- HDBaseT
- 1000BASE-T
- 2.5GBASE-T
- 5GBASE-T
- 10GBASE-T
DESIGN:
- Conductor: soft copper wire
- Insulation: PE
- Pair: two conductors twisted together:
– Pair 1: white-blue / blue
– Pair 2: white-orange / orange
– Pair 3: white-green / green
– Pair 4: white – brown / brown - Cross-web (PE or LSFRZH)
- Core wrapping
- Core shield1: aluminum polymer foil (metal outside)
- Core shield 2: tined copper braid
- Sheath: UV-stabilized PE
- MECHANICAL CHARACTERISTICS:
- Temperature range:
– During installation -10 °C … +60 °C
– After installation -20 °C … +60 °C - Bending radius: ≥ 10 cable diameters
- Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
- Capacitance: pF/m ≤ 56
- Direct current resistance for conductors(0,54 mm; 0,57 mm): Оhm/km ≤ 83-88
- Resistance unbalance: % 2
- Insulation resistance: GOhm/km ≥ 5
- Signal propagation velocity: % 68
- Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
- Test voltage between cores, (DC, 2 s): kV 2,5
LAN Cable CAT 6 SF/UTP 4x2x23 AWG Indoor Cable