• SH-MX8 Mixer

    • 8 channels XLR/TRS input
    • 48V Phantom POWER
    • 3 section EQ for each channels
    • USB input
    • Built‐in 16 effects
    • Built‐in 5 section EQ
    • Built‐in Power supply
    • BlueTooth
    • Bulit‐in power amplifier of 2*250W@8ohm 2*300W@4ohm
  • SH-SG5Z350W Amplifier

    • Case: Black color, aluminium case
    • Functions: Independent zone broadcasting (required SH‐MIC5Z remote paging console)
    • Features: Mic input: x4 (24V phantom power on/off)
    • Mic 1 Priority: Yes
    • AUX input: x2
    • Remote paging controle input: Yes (suitable with SH‐MIC5Z)
    • Line output: x1
    • EMC input: x1 (suitable with SH‐AP1CH)
    • Prerecorded Alarm voice: Yes
    • Adjustment: Zones independed volume control, MIC 1‐4, AUX 1, AUX 2,
    • Zone(s): 5
    • Output types: 4Ω, 8Ω / 70V / 100V
    • Max. output power: 350W
    • Safety: Output Short Circuit, Overheat, Overload protection
    • Rackmount design: Yes
    • Power consumption: AC 220V‐240V/50Hz‐60Hz
    • Dimensions: 484*450*132mm
  • SH-SG40W Mixer

    • Case: Black color, aluminium case
    • Functions: FM, USB, Bluetooth
    • Mic input: x1
    • Mic 1 Priority: Yes
    • AUX input: x1
    • AUX output: x1
    • Adjustment: MIC, AUX, MP3 (USB, Bluetooth), Bass, Treble
    • Zone(s): 1
    • Output types: 4‐16Ω/100V
    • Max. output power: 40W
    • IR remote control: Yes
    • Safety: Output Short Circuit, Overheat, Overload protection
    • Rackmount design: No
    • Power consumption: AC 220V‐240V/50Hz‐60Hz
    • Dimensions: 260x200x65mm
  • SH-SG80W Amplifier

    • Case: Black color, aluminium case
    • Functions: FM, USB, SD card, Bluetooth
    • Mic input: x1
    • Mic 1 Priority: Yes
    • AUX input: x1
    • AUX output: x1
    • Adjustment: MIC, Echo, AUX, MP3 (USB, FM, Bluetooth), Bass, Treble
    • Zone(s): 1
    • Output types: 4‐16Ω /100V
    • Max. output power: 80W
    • IR remote control: Yes
    • Safety: Output Short Circuit,
    • Overheat, Overload protection
    • Rackmount design: No
    • Power consumption: AC 220V‐240V/50Hz‐60Hz
    • Dimensions: 361*216*67mm
  • SH-SG130W Mixer

    • Case: Black color, aluminium case
    • Functions: USB, SD card, Bluetooth
    • Features: Chime
    • Mic input: x1
    • Mic 1 Priority: Yes
    • AUX input: x2
    • Line output: x1
    • Adjustment: Zones independed volume control, MIC 1, MIC 2, AUX 1, AUX 2, MP3 (USB, Bluetooth), Bass, Treble
    • Zone(s): 5 | Output types: 4‐16Ω / 70V / 100V
    • Max. output power: 130W
    • Safety: Output Short Circuit, Overheat, Overload protection
    • Rackmount design: Yes
    • Power consumption: AC 220V‐240V/50Hz‐60Hz
    • Dimensions: 484*343*88mm
  • SH-SG320W Mixer

    • Case: Black color, aluminium case
    • Functions: USB, SD card, Bluetooth
    • Features: Chime
    • Mic input: x1
    • Mic 1 Priority: Yes
    • AUX input: x2
    • Line output: x1
    • EMC input: x1
    • Prerecorded Alarm voice: Yes
    • Adjustment: Zones independent volume control, MIC 1, MIC 2, AUX 1, AUX 2, MP3 (USB, Bluetooth), Bass, Treble
    • Zone(s): 5
    • Output types: 4‐16Ω / 70V / 100V
    • Max. output power: 320W
    • Safety: Output Short Circuit, Overheat, Overload protection
    • Rackmount design: Yes
    • Power consumption: AC 220V‐240V/50Hz‐60Hz
    • Dimensions: 484*343*88mm
  • SH-SG650W Mixer

    • Case: Black color, aluminium case
    • Functions: USB, Bluetooth
    • Mic input: x1
    • Mic 1 Priority: Yes
    • AUX input: x2
    • Line output: x1
    • EMC input: x1
    • Prerecorded Alarm voice: Yes
    • Adjustment: Zones independed volume control, MIC 1, MIC 2, AUX 1, AUX 2, MP3 (USB, Bluetooth), Bass, Treble
    • Zone(s): 5
    • Output types: 4‐16Ω / 70V / 100V
    • Max. output power: 650W
    • Safety: Output Short Circuit, Overheat, Overload protection
    • Rackmount design: Yes
    • Power consumption: AC 220V‐240V/50Hz‐60Hz
    • Dimensions: 483*310*90mm
  • SH-MIC1CM Microphone

    • Power on/off button
    • Capsule type: Condenser
    • Frequency response: 40Hz~16Khz
    • Pattern: Ultra‐cardioid
    • Output impedance: 200 Ohm
    • Reference sound receiving distance 20~50sm
    • Balanced output
    • DC 9V
  • SH-KD415PA Loudspeaker

    • Wall mount type
    • ABS casing
    • ABS crust
    • White color
    • Driver size: 4″
    • Tweeter size: 1.5″
    • Power Taps @100V: 10W
    • Frequency response 170‐18000Khz
    • Mounting type: bracket
    • Mounting position: vertical, horizontal
    • Cable connection type – socket
    • Dimensions (WxDxH): W:160x140x220
  • SH-KD415PQ Loudspeaker

    • Wall mount type
    • ABS casing
    • ABS crust
    • Black color
    • Driver size: 4″
    • Tweeter size: 1.5″
    • Power Taps @100V: 10W
    • Frequency response 170‐18000Khz
    • Mounting type: bracket
    • Mounting position: vertical, horizontal
    • Cable connection type – socket
    • Dimensions (WxDxH): W:160x140x220
  • SH-5030A X-Ray Scanner

    • Tunnel dimensions 500 (Width) * 300 (Height) mm
    • Inspection speed: 22 cm / s
    • Maximum load capacity: 100kg
    • Differentiation: <0.101mm metal wire
    • Conductivity (guaranteed): 8mm steel, normally 10mm
    • Monitor 19”
    • Pseudocolor Image
  • Winner Pro 10K(L) Online UPS

    Input:

    • Capacity: 10000 VA / 8000 W
    • Voltage: 208/220/230/240 VAC
    • Voltage range: 110-300 VAC ± 3% at 50% load / 176-300 VAC ± 3% at 100% load
    • Frequency range: 46~54 or 56~64 Hz
    • Power factor: ≥ 0.99 @ nominal voltage (100% load)
      Output:
    • Output voltage: 208/220/230/240 VAC
    • Voltage regulation : ± 1%
    • Frequency range: 46~54 or 56~64 Hz
    • Frequency range(Batt. Mode): 50 Hz ±0.1 Hz or 60 Hz ±0.1 Hz
    • Current crest ratio: 3:1
    • Harmonic distortion(Linear load): ≤ 3% THD
    • Harmonic distortion(non-linear load): ≤ 5% THD
    • Transfer time: 0 ms
    • Waveform (Batt. Mode): pure sinewave
      Efficiency:
    • AC mode: 93%
    • Battery mode: 91%
      Battery:
    • Battery type & number: 12 V/9 Ah
    • Numbers:16/20
    • Typical recharge time: 9 hours recover to 90% capacity
    • Charging current: 1A/2A (adjustable)
      Indicators:
    • LCD Panel: UPS status, load level, battery level, input/output voltage, discharge timer, fault conditions
      Alarm:
    • Battery mode: Sounding every 4 seconds
    • Low battery Sounding every second
    • Overload: Sounding every 0.5 second
    • Fault: Continuously sounding
      Physical:
    • Dimension: D x W x H (mm)(UPS unit): 580 x 438 x 133(3U)
    • Dimension: D x W x H (mm)(battery pack): 580 x 438 x 133(3U)
    • Net weight (kgs)(UPS unit): 18
    • Net weight (kgs)(battery pack): 61
      Environment:
    • Humidity: 0-95 % RH @ 0-40°C (non-condensing)
    • Noise level: less than 58 dB
      Management:
    • Smart RS-232 / USB: Supports Windows®️ 2000/2003/XP/Vista/2008/Windows®️7/8, Linux, MAC
    • Optional SNMP: Power management from SNMP manager and web browser
  • LAN Cable CAT 6 U/UTP LSZH 4x2x23 AWG Indoor Cable

              APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Token Ring 16/100 Mbit/s
    • Fast Ethernet (100BASE-TX)
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T
    • PoE
    • PoE+
    • 4PPoE

      DESIGN:
    • Conductor: solid annealed copper
    • Insulation: PE
    • Pair: two conductors twisted:
    • Cross-web: HDPE, 2,6×2,6 mm
    • Jacket: LS0H, nominal thickness 0,5 mm; PVC, nominal thickness 0,5 mm
    • STANDARDS:
    • Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568.2-D
    • Cable: IEC 61156-5, EN 50288-6-1
    • Fire safety:LS0H jacket: EN 60332-1-2
    • CPR class: Eca
    • MECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius:- During installation ≥ 8 cable diameters- After installation ≥ 4 cable diameters
    • Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors TPG(0,52; 0,54 mm; 0,57 mm): Оhm/km ≤ 75-82-87
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
    • Test voltage between cores, (DC, 2 s): kV 2,5
  • LAN Cable CAT 6 SF/UTP 4x2x23 AWG Indoor Cable

              APPLICATION:

    • PBX
    • V.11
    • X.21
    • ISDN
    • Ethernet (10Base-T)
    • ATM-25/52/155 Mbit/s
    • 100VG-AnyLAN
    • Fast Ethernet (100BASE-TX)
    • Token Ring 16/100 Mbit/s
    • Firewire 100 Mbit/s
    • PoE (IEEE 802.3af)
    • PoE+ (IEEE 802.3at)
    • PoE++ (IEEE 802.3bt)
    • HDBaseT
    • 1000BASE-T
    • 2.5GBASE-T
    • 5GBASE-T
    • 10GBASE-T

      DESIGN:
    • Conductor: soft copper wire
    • Insulation: PE
    • Pair: two conductors twisted together:
      – Pair 1: white-blue / blue
      – Pair 2: white-orange / orange
      – Pair 3: white-green / green
      – Pair 4: white – brown / brown
    • Cross-web (PE or LSFRZH)
    • Core wrapping
    • Core shield1: aluminum polymer foil (metal outside)
    • Core shield 2: tined copper braid
    • Sheath: UV-stabilized PE
    • MECHANICAL CHARACTERISTICS:
    • Temperature range:
      – During installation -10 °C … +60 °C
      – After installation -20 °C … +60 °C
    • Bending radius: ≥ 10 cable diameters
    • Tensile stress ≤ 85 NELECTRICAL CHARACTERISTICS AT 20 °C:
    • Capacitance: pF/m ≤ 56
    • Direct current resistance for conductors(0,54 mm; 0,57 mm): Оhm/km ≤ 83-88
    • Resistance unbalance: % 2
    • Insulation resistance: GOhm/km ≥ 5
    • Signal propagation velocity: % 68
    • Characteristic impedance in the frequency range: 1-100 MHz 100 +/-15,22
    • Test voltage between cores, (DC, 2 s): kV 2,5