Shop

Default sorting
Show
16

  • Application:

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s, ATM LAN 1,2 Gbit/s

    Сompliance with the requirements:

    Cable: IEC 61156-5 (cat.5e)

    Cabling: ISO/IEC 11801-1 & EN 50173-1 (class D), ANSI/TIA 568-С.2 (cat.5e)

    Fire safety: IEC 60332-1, CPR class Eca

    Mechanical characteristics:

    Тemperature range:

    • During installation -10 °C … +60 °C
    • After installation -20 °C … +60 °C

     

    Bending radius:

    • During installation ≥ 8 cable diameters
    • After installation ≥ 4 cable diameters

     

    Tensile stress ≤ 85 N

     

    ELECTRICAL CHARACTERISTICS AT 20 °C:

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance for
    Оhm/km

    conductors with Ø:

    0,51 mm
    ≤ 92

    0,48 mm
    ≤ 103

    0,46 mm
    ≤ 112

    0,44 mm
    ≤ 123

    Insulation resistance
    GOhm*km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,69

    Characteristic impedance in the
    Ohm
    100±15

    frequency range of: 1-100 MHz

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20
    31,25

    Attenuation, dB, max; for max. cable lengths with conductor Ø:
    2,1
    4,1
    6,5
    8,3
    9,3
    11,7

    0,51 mm = 104 m

    0,48 mm = 92 m

    0,46 mm = 84 m

    0,44 mm = 77 m

    NEXT, dB, min
    65,3
    56,3
    50,3
    47,2
    45,8
    42,9

    PS NEXT, dB, min
    62,3
    53,3
    47,3
    44,2
    42,8
    39,9

    ELFEXT, dB, min
    64
    52
    44
    40
    38
    34

    PS ELFEXT, dB, min
    61
    49
    41
    37
    35
    31

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0
    23,3

    Frequency, MHz
    62,5
    100

    Attenuation, dB, max; for max. cable lengths with conductor Ø:
    17,0
    22,0

    0,51 mm = 104 m

    0,48 mm = 92 m

    0,46 mm = 84 m

    0,44 mm = 77 m

    NEXT, dB, min
    38,4
    35,3

    PS NEXT, dB, min
    35,4
    32,3

    ELFEXT, dB, min
    28
    24

    PS ELFEXT, dB, min
    25
    21

    RL, dB, min
    20,7
    19,0

    IEC 61156-5, values lower than 4 MHz are given for information only

     

     

    LAN Cable CAT5 F/UTP 4x2x24 AWG Indoor

  • Application:

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s, Firewire 100 Mbit/s, PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), PoE++ (IEEE 802.3bt), HDBaseT, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T (under 55 m)

     

    Installation and Operation conditions:

    For outdoor installation in telephone ducts, collectors, mines, on the walls of buildings in conditions of heightened electro-magnetic impacts. Operated on frequencies up to 250 MHz

     

    Compliance with the requirements:

    Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568-C.2

    Cable: IEC 61156-5, EN 50288-5-1

     

    Mechanical characteristics:

    Temperature range:

    • During installation -10 °C … +60 °C
    • After installation -50 °C … +60 °C

    Bending radius:

    • During installation ≥ 8 cable diameters
    • After installation ≥ 4 cable diameters

    Tensile stress ≤ 85 N

     

    Electrical characteristics at 20 °C:

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Direct current resistance
    Оhm/km
    ≤ 85

    Insulation resistance
    GOhm/km
    ≥ 5

    Resistance unbalance
    %
    2

    Signal propagation velocity
    s
    0,68

    Propagation delay
    ns/100 m
    ≤ 534+36/√f

    Delay shift on the frequency 100 MHz
    ns/100 m
    ≤ 30

    Characteristic impedance in the frequency range of:

    1-100 MHz

    100-250 MHz
     

    Ohm
     

    100±15

    100±22

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20
    31,25

    Attenuation, dB, max
    2,1
    3,8
    6
    7,6
    8,5
    10,8

    NEXT, dB, min
    75,3
    66,3
    60,3
    57,3
    55,8
    52,8

    PS NEXT, dB, min
    72,3
    63,3
    57,3
    54,3
    52,8
    49,8

    ELFEXT, dB, min
    68
    56
    48
    44
    42
    38

    PS ELFEXT, dB, min
    65
    53
    45
    41
    39
    35

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0
    23,6

    Frequency, MHz
    62,5
    100
    250

    Attenuation, dB, max
    15,5
    19,9
    33

    NEXT, dB, min
    48,3
    45,3
    39,3

    PS NEXT, dB, min
    45,3
    42,3
    36,3

    ELFEXT, dB, min
    32
    28
    20

    PS ELFEXT, dB, min
    29
    25
    17

    RL, dB, min
    21,5
    20,1
    17,3

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT6 F/UTP 4x2x23 AWG Outdoor

  • Application

    • PBX, 11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s, 100VG-AnyLAN, Token Ring 16/100 Mbit/s
    • Fast Ethernet (100BASE-TX), Gigabit Ethernet (1000BASE-T), 2,5 Gbit/s Ethernet (2.5GBASE-T) and 5 Gbit/s (5GBASE-T)
    • PoE, PoE+, PoE++

    Installation and Operation Conditions

    To provide support for aerial outdoor applications in conditions of height- ened electromagnetic impacts. Operated on frequencies up to 250 MHz

    Compliance with the requirements

    Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568.2-D

    Cable: IEC 61156-5, EN 50288-5-1, ANSI/TIA-568.2-D

    CPR euroclass: Fca

    LAN Cable CAT6 F/UTP 4x2x23 AWG Outdoor Aerial

  • Application:

    PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s,

    100VG-AnyLAN, Token Ring 16/100 Mbit/s, Fast Ethernet (100BASE- TX), 1000BASE-T, 2.5GBASE-T, 5GBASE-T, PoE, PoE+, PoE++

    Installation and Operation conditions:

    For stationary installation inside buildings, stations, structures and equipment. Op- erated on frequencies up to 250 MHz

    Standads:

    Cabling: ISO/IEC 11801-1, EN 50173-1, ANSI/TIA-568.2-D

    Cable: IEC 61156-5, EN 50288-6-1, ANSI/TIA-568.2-D

    Fire safety:

    • Flame propagation: EN 60332-1-2

    CPR class: Eca

    Mechanical characteristics:

    Temperature range:

    • During installation -10 °C … +60 °C
    • After installation -20 °C … +60 °C

     

    Bending radius:

    • During installation ≥ 8 cable diameters
    • After installation ≥ 4 cable diameters

     

    Tensile stress ≤ 85 N

     

    Electrical characteristics at 20 °C:

    Parameter
    Unit
    Value

    Capacitance
    pF/m
    ≤ 56

    Resistance for conductor Ø, mm:

    ·     0,54
    Оhm/km
    ≤ 82

    Insulation resistance
    GOhm*km
    ≥ 5

    Resistance unbalance
    %
    1

    Velocity of propagation (NVP)
    %
    70

    Propagation delay
    ns/100 m
    ≤ 534+36/√f

    Delay skew
    ns/100 m
    ≤ 20

    Characteristic impedance in the frequency range of:

    ·     1-100 MHz

    ·     101-250 MHz
     

    Ohm
     

    100±15

    100±22

    Test voltage between cores, (DC, 2 s)
    kV
    2,5

     

    Frequency, MHz
    1
    4
    10
    16
    20
    31,25

    Attenuation, dB, max
    2,1
    3,8
    6
    7,6
    8,5
    10,8

    NEXT, dB, min
    75,3
    66,3
    60,3
    57,3
    55,8
    52,8

    PS NEXT, dB, min
    72,3
    63,3
    57,3
    54,3
    52,8
    49,8

    ELFEXT, dB, min
    68
    56
    48
    44
    42
    38

    PS ELFEXT, dB, min
    65
    53
    45
    41
    39
    35

    RL, dB, min
    20,0
    23,0
    25,0
    25,0
    25,0
    23,6

    Frequency, MHz
    62,5
    100
    250

    Attenuation, dB, max
    15,5
    19,9
    33

    NEXT, dB, min
    48,3
    45,3
    39,3

    PS NEXT, dB, min
    45,3
    42,3
    36,3

    ELFEXT, dB, min
    32
    28
    20

    PS ELFEXT, dB, min
    29
    25
    17

    RL, dB, min
    21,5
    20,1
    17,3

    IEC 61156-5, values lower than 4 MHz are given for information only

    LAN Cable CAT6 UTP 4x2x23 AWG Indoor

    • For 22-26AWG stranded and solid wire
    • Meet TIA/ EIA-568A and TIA/ EIA-568B CAT5E/ CAT6 Requirements
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • IDC modules fit Krone or 110 impact tools
    • Impact resistant construction

    LAN Coupler Inline

  • Feature:

    • Panel clip for easy installation
    • High temperature stability
    • High precision alignment
    • Good interchangeability
    • Low insertion loss
    • Good repeatability
    • Good durability
    • Compact design

    Application:

    • Optical Fiber Communication System
    • Telecommunication Network
    • Local Area Networks(LAN)
    • Data Processing Networks
    • Engineering ReLCue
    • Test Equipment
    • Fiber CATV
    • FTTH
    • Optical Distribution Frame
    • Docking Connector

    LC UPC SM Adapter DX

  • Feature:

    • Panel clip for easy installation
    • High temperature stability
    • High precision alignment
    • Good interchangeability
    • Low insertion loss
    • Good repeatability
    • Good durability
    • Compact design

    Application:

    • Optical Fiber Communication System
    • Telecommunication Network
    • Local Area Networks(LAN)
    • Data Processing Networks
    • Engineering ReLCue
    • Test Equipment
    • Fiber CATV
    • FTTH
    • Optical Distribution Frame
    • Docking Connector

    LC UPC SM Adapter SX

  • Application

    Designed for connection home acoustics (speakers, music centers, home cinemas), lengthening speaker cords.

    Cable design

    1. Conductor: copper wire (conductor structure complies with VDE 0295 class 6)
    2. Sheath: ion stable PVC (transparent with a longitudinal black stripe).

    Installation and operation conditions

    Temp Rating:

    • Installation Temp Rating: -10 °C … +50 °C;
    • Operating Temp Range: -20 °C … +70 °C.

    Min Bend Radius: 5 cable diameters.

    Main technical and mechanical characteristics

    Cable brand                                          Resistance, Ohm/km     Capacitance, pF/m     Inductance, mH/k

    Loudspeaker Cable 2*0,75 Hi-Fi
    23,5                               60                                     0,61

     

    Nomenclature and mass-dimensional characteristics

    Cable brand                                                     Outside diameter, mm                            Weight, kg/km

    Loudspeaker Cable 2*0,75 Hi-Fi
    2,5х5,4
    27,1

    Loudspeaker cable 2×0,75 mm²

  • Application

    Designed for connection home acoustics (speakers, music centers, home cinemas), lengthening speaker cords.

    Cable design

    1. Conductor: copper wire (conductor structure complies with VDE 0295 class 6)
    2. Sheath: ion stable PVC (transparent with a longitudinal black stripe).

    Installation and operation conditions

    Temp Rating:

    • Installation Temp Rating: -10 °C … +50 °C;
    • Operating Temp Range: -20 °C … +70 °C.

    Min Bend Radius: 5 cable diameters.

    Main technical and mechanical characteristics

    Cable brand                                          Resistance, Ohm/km     Capacitance, pF/m     Inductance, mH/k

    Loudspeaker Cable 2*0,75 Hi-Fi
    12,5                              67                                     0,54

     

    Nomenclature and mass-dimensional characteristics

    Cable brand                                                     Outside diameter, mm                            Weight, kg/km

    Loudspeaker Cable 2*0,75 Hi-Fi
    3,5х7,4
    54,7

    Loudspeaker cable 2×1,5 mm²

  • Features:

    1. Automatically adapt to 10/100/1000Mbps environment to facilitate network upgrade
    2. Built-in high-efficiency switching core to realize flow control and reduce broadcast packets
    3. Supports full-duplex and half-duplex transmission modes, and can automatically negotiate
    4. Supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation
    5. Support FX half/full duplex
    6. Support storage and forwarding or 1000Mbps direct transmission mode
    7. Support low-latency transmission
    8. Support 1600byte long data packet transmission
    9. Support STP spanning tree to form a redundant network
    10. It supports multiple fiber port options of dual fiber multimode, dual fiber single mode and single fiber single mode, which expands the needs of users

    Optic Converter SM 1 Pair A B 1 GBPS 40KM

  • Features:

    1. Automatically adapt to 10/100/1000Mbps environment to facilitate network upgrade
    2. Built-in high-efficiency switching core to realize flow control and reduce broadcast packets
    3. Supports full-duplex and half-duplex transmission modes, and can automatically negotiate
    4. Supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation
    5. Support FX half/full duplex
    6. Support storage and forwarding or 1000Mbps direct transmission mode
    7. Support low-latency transmission
    8. Support 1600byte long data packet transmission
    9. Support STP spanning tree to form a redundant network
    10. It supports multiple fiber port options of dual fiber multimode, dual fiber single mode and single fiber single mode, which expands the needs of users

    Optic Converter SM 1 Pair A B 1 GBPS 20KM

    1. Automatically adapt to 10/100Mbps environment to facilitate network upgrade
    2. Built-in high-efficiency switching core to realize flow control and reduce broadcast packets
    3. Supports full-duplex and half-duplex transmission modes, and can automatically negotiate
    4. Supports automatic crossover of twisted pair ports, which is convenient for system debugging and installation
    5. Support FX half/full duplex
    6. Support storage and forwarding or 100Mbps direct transmission mode
    7. Support low-latency transmission
    8. Support STP spanning tree to form a redundant network
    9. It supports multiple fiber port options of dual fiber multimode, dual fiber single mode and single fiber single mode, which expands the needs of users

    Optic Converter SM 1 Pair A B 100 MBPS 25KM

  • The optical fiber patch cords are suitable for data communication, telecommunication applications.
    Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision ceramic ferrule with good concentricity
    • Compact & strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and LCratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord LC-LC SM 9/125 DX

  • The optical fiber patch cords are suitable for data communication, telecommunication applications. Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision ceramic ferrule with good concentricity
    • Compact & strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and scratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord SC-LC APC SM 9/125 DX

  • The optical fiber patch cords are suitable for data communication, telecommunication applications. Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision ceramic ferrule with good concentricity
    • Compact & strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and scratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord SC-LC MM 50/125 DX OM3

  • The optical fiber patch cords are suitable for data communication, telecommunication applications. Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision ceramic ferrule with good concentricity
    • Compact & strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and scratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord SC-LC SM 9/125 DX

  • The optical fiber patch cords are suitable for data communication, telecommunication applications. Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision  ceramic ferrule with good concentricity
    • Compact &b strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and scratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord SC-SC APC SM 9/125 DX

  • The optical fiber patch cords are suitable for data communication, telecommunication applications. Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision ceramic ferrule with good concentricity
    • Compact & strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and scratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord SC-SC MM 50/125 DX OM3

  • The optical fiber patch cords are suitable for data communication, telecommunication applications. Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision ceramic ferrule with good concentricity
    • Compact & strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and scratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord SC-SC SM 9/125 DX

  • The optical fiber patch cords are suitable for data communication, telecommunication applications. Our patch cords are with standard optical specifications, precise length tolerances.
    All assemblies are 100% inspected for optical characteristics and fiber end face finish.
    The terminated connectors in assemblies are designed to and are compatible with industry standards

     

    Features:

    • Adopts high precision  ceramic ferrule with good concentricity
    • Compact &b strong crimping offers exceptional tensile strength in cable assemblies
    • 100% inspected for optical characteristics & fiber endface finish
    • Low insertion loss & return loss, clean and scratch-free end faces
    • Good performance endurance under changing circumstances

    Optic Patch Cord SC/UPC-SC/APC SM 9/125 DX

  • Features:

    • Compliant with international standard , such as ANSI,Bellcore, TLA/EIA, IEC
    • Realize the active-link of optic fiber transmission
    • Low insertion loss and high return loss
    • Excellent repeatability and interchangeability

    Application:

    • FTTH, LAN, PON & Optical CATV, Local ring net
    • Optical fiber communication system
    • Optical fiber test equipment
    • Optical fiber sensor
    • Industry and military application

    Optic Pigtail LC UPC SM 9/125 1M OD 2.0 0,3DB

  • Features:

    • Compliant with international standard, such as ANSI,BelSCore, TLA/EIA, IEC
    • Realize the active-link of optic fiber transmission
    • Low insertion loss and high return loss
    • Excellent repeatability and interchangeability

    Applications:

    • FTTH, LAN, PON & Optical CATV, Local ring net
    • Optical fiber communication system
    • Optical fiber test equipment
    • Optical fiber sensor
    • Industry and military application

    Optic Pigtail SC APC SM 9/125 1M OD 2.0 0,3DB

  • Features:

    • Compliant with international standard , such as ANSI,BelSCore, TLA/EIA, IEC
    • Realize the active-link of optic fiber transmission
    • Low insertion loss and high return loss
    • Excellent repeatability and interchangeability

    Applications:

    • FTTH, LAN, PON & Optical CATV, Local ring net
    • Optical fiber communication system
    • Optical fiber test equipment
    • Optical fiber sensor
    • Industry and military application

    Optic Pigtail SC UPC SM 9/125 1M OD 2.0 0,3DB

  • Mini joint box is one of the main equipment for user access points, applied for protective connection and distribution between two or more cables. The primary function is to connect distribution cable and indoor cable in the open air. It’s widely used in communication systems, cable TV, optical cable network systems and others by virtue of steady structure, good sealing performance and easy construction.

    Features

    • The body is made of high quality engineering plastic with good strength;
    • With good waterproof design, the fiber optical splice closure can be applied into underground and aerial.
    • Be equipped with 2 splice trays (each capacity is 12 cores)
    • Excellent fiber routing design ensures the radius curvature of the fiber well and enough fiber storage space.

    Outdoor Fiber Optic Closure 12 Port Vertical

  • Optical splice closures are used to distribute , splice and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man-well of pipeline, embedded situations etc. Comparing with terminal box, the closure requires much stricter requirement of seal.

     

    Features

    • The closure casing is made of quality engineering PC plastics and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
    • The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment. The protection grade reaches IP68.
    • The splice trays inside the closure are turn-able like booklets and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm. Each optical cable and fiber can be operated individually.
    • The closure is of small volume, big capacity and convenient maintenance. The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance.

     

    Applications

    • Used for direct transmission of outdoor cable in aerial, duct and direct buried application
    • Used for branching  connection and protect the joint.

    Outdoor Fiber Optic Closure 24 Port Horizontal

  • Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man- well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box.

     

    Features:

    1. The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
    2. The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment. The protection grade reaches IP68.
    3. The closures are applicable to ribbon type optical cable and common optical cable.
    4. The splice trays inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm.Each optical cable and fiber can be operated individually.
    5. The closure is of small volume, big capacity and convenient maintenance.  The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance.
    6. The casing can be opened repeatedly without air leakage. No special tools are required. The operation is easy and simple. The air valve is provided for the closure and used to check the sealing performance.

    Outdoor Fiber Optic Closure 24 Port Vertical

  • Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, man- well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box.

     

    Features:

    1. The closure casing is made of quality engineering plastics, and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
    2. The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment. The protection grade reaches IP68.
    3. The closures are applicable to ribbon type optical cable and common optical cable.
    4. The splice trays inside the closure are turn-able like booklets, and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm.Each optical cable and fiber can be operated individually.
    5. The closure is of small volume, big capacity and convenient maintenance.  The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance.
    6. The casing can be opened repeatedly without air leakage. No special tools are required. The operation is easy and simple. The air valve is provided for the closure and used to check the sealing performance.

    Outdoor Fiber Optic Closure 48 Port Vertical

  • Description

    Optical splice closures are used to distribute, splice and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead,  man-well of pipeline, embedded situation etc. Comparing with terminal box, the closure requires much stricter requirement of seal.

     

    Applocations

    • Used for direct transmission of outdoor cable in aerial, dust and direct buried application
    • Used for branching connection and protect the joint

     

    Standard Accessories

    • Metal spanner: 1 pcs
    • Metal hanger: 2 pcs
    • Sealing rubber strip: 1 pcs
    • Insulating tape: 1 pcs
    • Cable tie: 3mm*110mm 8pcs
    • Plastic plug: 8 pcs
    • Rubber waterproof strip: 2 pcs
    • Heat-shrink sleeve: 1.2mm*60mm 96pcs

    Outdoor Fiber Optic Closure 96 Port Horizontal

  • Description

    Optical splice closures are used to distribute, splice, and store the outdoor optical cables which enter and exit from the ends of the closure. There are two connection ways: direct connection and splitting connection. They are applicable to situations such as overhead, manwell of pipeline, embedded situation etc.

    Comparing with terminal box, the closure requires much stricter requirement of seal. Sealing ring and air valve are required for closure, but that are not necessary for terminal box.

     

    Features

    • The closure casing is made of quality engineering plastics and of good performance of anti-erosion against acid and alkali salt, anti-aging, as well as smooth appearance and reliable mechanical structure.
    • The mechanical structure is reliable and has the performance of resisting wild environment and intensive climate changes and serious working environment. The protection grade reaches IP68.
    • The closures are applicable to ribbon type optical cable and common optical cable.
    • The splice trays inside the closure are turn-able like booklets and have adequate curvature radius and space for winding optical fiber to make sure the curvature radius for optical winding 40mm. Each optical cable and fiber can be operated individually.
    • The closure is of small volume, big capacity and convenient maintenance. The elastic rubber seal rings inside the closure are of good sealing and sweat-proof performance.
    • The casing can be opened repeatedly without air leakage. No special tools are required. The operation is easy and simple. The air valve is provided for the closure and used to check the sealing performance.

    Outdoor Fiber Optic Closure 96 Port Vertical

  • SH-PG004 supports data and power transmission through CAT.5 cables at the same time. And 4+1 port support fast connecting at 10/100/1000Mbps.. It reduces line losses effectively though 4-core cable supplying power same time.

     

    Cost effective LEO-P1010UG-1F provide a simple network for wireless AP, business and home that are based on the installation of IP Camera. These devices away from electrical outlets are very suitable for hanging on the wall or ceiling. PoE eliminates the hassle for these devices, specially the electrical outlets. Connect the AC power connection to make those difficult device more flexible, and the installation cost minimization.

    POE Switch SH-PG004 4 PORT GIGABIT with 1*RJ45 uplink + 1*SFP

  • This POE Switch supports data and power transmission through CAT.5 cables at the same time. And 8+2 port support fast connecting at 10/100/1000Mbps. It also supports vlan, fiber and coaxial cable etc. It reduces line losses effectively though 4-core cable supplying power same time.

    Cost effective provide a simple network for wireless AP, business and home that are based on the installation of IP Camera. These devices away from electrical outlets are very suitable for hanging on the wall or ceiling. PoE eliminates the hassle for these devices, specially the electrical outlets. Connect the AC power connection to make those difficult device more flexible, and the installation cost minimization.

    POE Switch SH-PG008 8 Port Gigabit with 2*RJ45 uplink + 2*SFP

  •  

    General Features

    Welded monoblock body – 1.50mm Vertical opening door with one point locking, 27° and 90° steps. There are also 2 lock options with different passwords. Ventilation holes for passive cooling inside the box In-lid mounting capability for 19” DVR device Adjustable fixing plates for device mounting Rubber fixing gaskets that prevent damage to the device by applying pressure on the device during the opening and closing of the cover. Movable mounting plate for 12” display mounting on rear wall variation by model 5 different cable entry points on the body: top, bottom, left, right and rear wall. 1U mounting bracket for mounting 10” Socket module in the upper part of the body. Robust and fine-textured Electrostatic Powder Paint application 90 micron. Maximum loading capacity : 50 kg

     

     

     

     

    Product code
    Product Description W=580 D=550 mm
    Dimensions (W*H*D)
    Product Kg

    MT.DV1U5855150.C0
    Security cabinet for 1U DVR Video System
    580x550x150 mm
    18 kg

    MT.DV2U5855150.C0
    Security cabinet for 2U DVR Video System Security cabinet & Monitor
    580x550x200 mm
    20 kg

    MT.DV1U5855150M.C0
    mount front cover for 1U DVR Video System Security cabinet & Monitor
    580x550x150 mm
    19 kg

    MT.DV2U5855150M.C0
    mount front cover for 2U DVR Video System
    580x550x200 mm
    21 kg

     

     

    RACK 19” for DVR and MONITOR 580×550

  • Features

    • Safety class rating IP67
    • Lockable steel front door with pivot handle
    • 140° door opening angle
    • Front door with reinforcing bars and sealing system
    • Load capacity of the rails: 100kg
    • 1.5mm strong steel sheet, high loading capacity, powder coated
    • Cable entries in the base
    • The roof canopy provides protection for suitable fan units and takes care of ventilation and warm air
    • Integrated ventilation inlets ensure fresh air intake
    • 4 mounting brackets, 3mm strong, including screws and washers suitable for wall mounting

    Rack Cabinet 09U 19″ 600x450mm IP67 Outdoor

  • Standard:

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2,

    DIN41494 part 7, GBIT3047.2-92 standard.

    Feature:

    19 inch width standard;

    Removevable Side Panels, side locks;

    Knock off hole for entering cable on both top cover, bottom panel, rear panel

    Turning angle of front door is over 180 degrees

    Easy mounting installation

    Unassembled package saving shipping space

    fan, shelf, PDU are optional

    Loading Capacity:

    80 KG

    Degree of Protection:

    IP20

    Material:

    SPCC Cold Rolled Steel

    Thickness: 2.0mm-1.2 mm-1.0mm

    Surface Finish:

    Powder coating

     

    Specification
    Quantity
    Unit
    Material
    Surface Finish
    Remark

    Frame
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Side panel
    2
    Piece
    SPCC cold rolled steel
    Powder coated

    Top cover
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Bottom panel
    1
    Piece
    SPCC cold rolled steel
    Powder coated

    Mounting profile
    4
    Piece
    SPCC cold rolled steel
    Powder coated
    U mark

    Front door
    1
    Piece
    5MM toughened glass door/SPCC
    Powder coated

    Lock
    1
    Piece

    with 2 keys

    M6 Square nut
    12
    Piece
    Steel
    Color Zinc

    M6 B-head screw
    12
    Piece
    Steel
    Color Zinc

    Allen wrench
    1
    Piece
    Steel
    Color Zinc

    Rack Cabinet 12U 600x600mm no Fan no Shelf

    • Standard: Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard
    • Feature:

      19 inch standard;

      Removable Side Panels, side locks optional;

      Knock off hole for entering cable on both top cover, bottom panel,real panel

      Turning angle of front door is over 180 degrees

      Easy mounting installation

      Unassembled package saving shipping space

      fans, shelf, PDU are optional

    • Loading Capacity: 80 KG
    • Degree of Protection: IP20
    • Material:

      SPCC Cold Rolled Steel

      Thickness:2.0mm-1.0mm-1.8mm

    • Surface Finish: Powder coating

    Rack Cabinet 15U 600X600mm 1 Shelf + 2 Fans

  • Rack Cabinet 18U 600X600mm 1 Shelf + 2 Fans

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 22U 600×1000 MM 4 Fans+1 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 22U 600×600 MM 2 Fans+1 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 22U 600×800 MM 4 Fans+1 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 27U 600×1000 MM 4 Fans+1 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 27U 600×600 MM 2 Fans+1 Shelf

  • Standard

    DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    19 inch width standard;

    Removable Side Panels, side locks optional;

    Knock off hole for entering cable on both top cover, bottom

    panel,real panel

    Turning angle of front door is over 180 degrees

    Easy mounting installation

    Unassembled package saving shipping space

    fan,shelf,PDU are optional

    Loading Capacity

    800KG

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish:

    Powder coating

    Rack Cabinet 27U 600×800 mm 4 Fans+1 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 32U 600×600 MM 2 Fans+1 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 32U 600×800 MM 4 Fans+1 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 42U 600MMx1000MM 4 Fans+3 Shelf

  • Standard

    Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard.

    Feature

    • 19 inch width standard
    • Removable Side Panels, side locks optional
    • Knock off hole for entering cable on both top cover, bottom panel, real panel
    • Turning angle of front door is over 180 degrees
    • Easy mounting installation
    • Unassembled package saving shipping space
    • Fan, shelf, PDU are optional

    Loading Capacity

    800 kg

    Degree of Protection

    IP20

    Material

    SPCC Cold Rolled Steel

    Thickness:2.0mm-1.2mm-1.0mm

    Surface Finish

    Powder coating

    Rack Cabinet 42U 600×600 MM 2 Fans+3 Shelf

    • Standard: Comply with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GBIT3047.2-92 standard
    • Feature:

      19 inch width standard;

      Removable Side Panels, side locks optional;

      Knock off hole for entering cable on both top cover, bottom panel,real panel

      Turning angle of front door is over 180 degrees

      Easy mounting installation

      Unassembled package saving shipping space

      fan,shelf,PDU are optional

    • Loading Capacity: 800 KG
    • Degree of Protection: IP20
    • Material:

      SPCC Cold Rolled Steel

      Thickness:2.0mm-1.2mm-1.0mm

    • Surface Finish: Powder coating

    Rack Cabinet 42U 600X800mm 4 Fans + Shelf

  • Force-X Series Server and Network Cabinets; Force-Xs server represents perforated cover and Force-Xn network glass cover products. Force-X series are the most suitable products that meet your expectations with its strong aesthetic structure that provides maximum ventilation for your server storage and other applications. In addition, with its heavy-duty construction structure, it allows your heavy server equipment to be hosted. With its professional structure and aesthetic appearance, it is a highly suitable design that is thought to meet the needs of customers in your Data Center applications and fulfills data center criteria.

     

    Force-x series server rack cabinet system is designed and manufactured for demanding data center environments. It is designed to accommodate all 19” devices and servers produced by major brands such as HP, Dell, Sun, Cisco, Juniper, IBM, Compaq.

    Rack Cabinet 42U 800x1000mm 4 fans + 1 shelf