Shop

Default sorting
Show
16

  •  Input:

    • Capacity: 1000 VA / 600 W
    • Voltage: 110/120 VAC or 220/230/240 VAC
    • Voltage range: 81-145 Vac / 162-290 VAC
    • Frequency range: 60-50 Hz (auto sensing)Output:
    • Output voltage: 110/120 or 220/230/240 VAC
    • AC voltage regulation (Batt. Mode): ± 10%
    • Frequency range (Batt. Mode): 50 Hz or 60 Hz ± 1 Hz
    • Transfer time: Typical 2-3 ms
    • Waveform (Batt. Mode): Simulated sinewave

      Battery:
    • Battery type & number: 12 V/7 Ah x 2
    • Typical recharge time: 4-6 hours recover to 90% capacity

      Protection:
    • Full protection: overload, discharge and overcharge protection

      Indicators:
    • AC mode: Green lighting
    • Battery mode: Green lighting
    • Fault: N/A

      Alarm:
    • Battery mode: Sounding every 10 seconds
    • Low battery Sounding every second
    • Overload: Sounding every 0.5 second
    • Fault: Continuously sounding

      Physical:
    • Dimension: D x W x H (mm): 320 x 130 x 182
    • Net weight (kgs): 8.2

      Environment:
    • Humidity: 0-90 % RH @ 0-40°C (non-condensing)
    • Noise leverl: less than 40 dB

    Apex03-1K-3 LED UPS

  • Input:

    • Capacity: 2000 VA / 1200 W
    • Voltage: 110/120 VAC or 220/230/240 VAC
    • Voltage range: 81-145 Vac / 162-290 VAC
    • Frequency range: 60-50 Hz (auto sensing)

      Output:
    • Output voltage: 110/120 or 220/230/240 VAC
    • AC voltage regulation (Batt. Mode): ± 10%
    • Frequency range (Batt. Mode): 50 Hz or 60 Hz ± 1 Hz
    • Transfer time: Typical 2-3 ms
    • Waveform (Batt. Mode): Simulated sinewave

      Battery:
    • Battery type & number: 12 V/9 Ah x 2
    • Typical recharge time: 4-6 hours recover to 90% capacity

      Protection:
    • Full protection: overload, discharge and overcharge protection

      Indicators:
    • AC mode: Green lighting
    • Battery mode: Yellow flashing
    • Fault: Red lighting

      Alarm:
    • Battery mode: Sounding every 10 seconds
    • Low battery Sounding every second
    • Overload: Sounding every 0.5 second
    • Fault: Continuously sounding

      Physical:
    • Dimension: D x W x H (mm): 320 x 130 x 182
    • Net weight (kgs): 10.6

      Environment:
    • Humidity: 0-90 % RH @ 0-40°C (non-condensing)
    • Noise leverl: less than 40 dB

    Apex14-2K-3LED UPS

  • Cable Organizer 1U 5 Ring

  • The entire shell, including the drawer door panel, is made of 0.8 SPCC cold-rolled sheet. The independent front and rear fenders are designed to form a double support frame structure, ensuring long-term use and resistance to heavy pressure without deformation.

    Cash Drawer EC-410

  • Dimensions(mm): 460W×170D×100H
    Mechanism: Flip-top Open
    Material: Metal
    Metal Drawer: No
    Media Slot: 1
    Cash Tray: 6 vertical bills, removable
    Coin Tray: 8 coins
    Voltage: 12V/24V
    Connector: RJ11
    Color: Black/ beige
    Lockset: 3 positions
    Net Weight: 4.9kg

    Cash Drawer FT460

  • Specification:

    • Stable Transmission
    • 100% pass fluke test
    • Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the
    • Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network
    • Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
    • Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

     

    CAT5E UTP Patch Cord

    Catagory
    CAT5E

    Shieled
    NO

    Conductor Material
    Stranded Bare Copper

    Cable AWG
    26

    Construction(±0.01mm)
    7/0.16

    Connector
    8P8C UTP plug; 3μm gold plating

     

    Insulation
    Material
    PE

    Nom. Thickness(mm)
    0.14

    Diameter(±0.05mm)
    0.77

     

     

    Jacket
    Material
    PVC

    Nom. Thickness(mm)
    0.7

    Diameter(±0.30mm)
    5

    Color
    Light gray

    ELECTRICAL TEST
    100% OPEN,SHORT & MISS WIRE TEST

    CONDUCTOR RESISTANCE
    3~10 OHMS MAX.

    INSULATOR RESISTANCE
    5M OHMS MIN.

    HI-POT
    DC 300V 0.01sec

    Length
    0.5M/1M/2M/3M/5M (or customized length)

     

    CAT5 U/UTP Patch Cord

    • For 22-26AWG stranded and solid wire
    • Meet TIA/ EIA-568A and TIA/ EIA-568B CAT5E/ CAT6 Requirements
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • Good impact resistance
    • High and low temperature resistance
    • Stable transmission

    CAT5E F/UTP Modular Keystone Jack

    • For 22-26AWG stranded and solid wire
    • Impact resistant plastic
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • IDC modules fit Krone or 110 impact tools
    • Stable transmission

    CAT5E U/UTP Modular Keystone Jack

  • Specification:

    • With Cat5e keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT5E UTP Patch panel

    Shielded
    NO

    Port
    48-port

    Unit
    2U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure (not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Relative humidity
    85% (30℃)

    Operation temperature
    -20℃ to 60℃

    CAT5E U/UTP Patch Panel 48 Ports 2U

  • Number of ports: 24

    Material: SPCC + ABS Plastics

    Standard: ISO/IEC11801, TIA/EIA568

    Dimensions (HxWxD): 44.5×482.5×92 mm

    CAT6 F/UTP Keystone Modular Patch Panel 24 Port

    • For 22-26AWG stranded and solid wire
    • Meet TIA/ EIA-568A and TIA/ EIA-568B CAT5E/ CAT6 Requirements
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • Good impact resistance
    • High and low temperature resistance
    • Stable transmission

    CAT6 F/UTP Modular Keystone Jack

  • Specification:

    • Stable Transmission
    • 100% pass fluke test
    • Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the cable.
    • Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network expansion.
    • Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
    • Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

     

    CAT6 FTP Patch Cord

    Catagory
    CAT6

    Shieled
    YES

    Conductor Material
    Stranded Bare Copper

    Cable AWG
    26

    Construction(±0.01mm)
    7/0.16

    Connector
    8P8C FTP plug; 3μm gold plating

     

    Insulation
    Material
    PE

    Nom. Thickness(mm)
    0.21

    Diameter(±0.05mm)
    0.9

     

     

    Jacket
    Material
    PVC

    Nom. Thickness(mm)
    0.55

    Diameter(±0.30mm)
    6

    Color
    Light gray

    ELECTRICAL TEST
    100% OPEN,SHORT & MISS WIRE TEST

    CONDUCTOR RESISTANCE
    3~10 OHMS MAX.

    INSULATOR RESISTANCE
    5M OHMS MIN.

    HI-POT
    DC 300V 0.01sec

    Length
    0.5M/1M/2M(or customized lenghth)

    CAT6 F/UTP Patch Cord

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 FTP Patch panel

    Shielded
    Yes

    Port
    24-port

    Unit
    1U

    Material
    –  Panel: 1.2mm SPCC with black color painting

    –  RJ45 Housing: PC

    –  RJ45 Contatt material and finished:

    Phosphor Bronze with 50-60 micro-inh Nickel plated Contact area: 3 micro-inch gold plating

    –  IDC house: PC, UL 94V-2 Krone

    –  IDC terminal material and finishing: phosphor bronze with 50 micro-inch tin-lead plated; over 50-60 micro inch nikel plating

    –  PCB: FR4 UL94VO

    IDC Accept
    22-26 AWG Stranded and solid wire

    Retention strength
    7.7 kgs between jack and plug

    Insertion force
    900 grms for 8 contacts

    Durability
    Jack: 750 cycles plug-jack mating and unmating test Inseration cycles at 20 cycles/min max.

    Contact resistance test per 100 cycles IDC: Max. 200 punching time

    Operating temperature
    -40~+70 °C

    CAT6 F/UTP Patch Panel 24 Ports 1U

    • For 22-26AWG stranded and solid wire
    • Impact resistant plastic
    • Labels for T568A and T568B wiring standards
    • Gold-plated contacts
    • IDC modules fit Krone or 110 impact tools
    • Stable transmission

    CAT6 U/UTP Modular Keystone Jack

  • Specification:

    • Stable Transmission
    • 100% pass fluke test
    • Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the
    • Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network
    • Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
    • Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

     

    CAT6 UTP Patch Cord

    Catagory
    CAT6

    Shieled
    NO

    Conductor Material
    Stranded Bare Copper

    Cable AWG
    26

    Construction(±0.01mm)
    7/0.16

    Connector
    8P8C UTP plug; 3μm gold plating

     

    Insulation
    Material
    PE

    Nom. Thickness(mm)
    0.17

    Diameter(±0.05mm)
    0.88

     

     

    Jacket
    Material
    PVC

    Nom. Thickness(mm)
    0.7

    Diameter(±0.30mm)
    6

    Color
    Light gray

    ELECTRICAL TEST
    100% OPEN,SHORT & MISS WIRE TEST

    CONDUCTOR RESISTANCE
    3~10 OHMS MAX.

    INSULATOR RESISTANCE
    5M OHMS MIN.

    HI-POT
    DC 300V 0.01sec

    Length
    0.25M/0.5M/1M/2M(or customized lenghth)

    CAT6 U/UTP Patch Cord

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 UTP Patch panel

    Shielded
    NO

    Port
    24-port

    Unit
    1U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure (not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Back wave loss
    ≧34dB (1≦f<100MHZ)

    Relative humidity
    85% (30℃)

    Min near end cros talk loss 100MHZ
    ≧43dB (100MHZ)

    Min far end cros talk loss 100MHZ
    ≧35.3dB (100MHZ)

    Operation temperature
    -20℃ to 60℃

     

    CAT6 U/UTP Patch Panel 24 Ports 1U

  • Specification:

    • With CAT6 keystone modules, for 19″cabinet
    • Complete metalation and reed
    • Modularization design
    • Ant-burn performance, meeting the International standard
    • Label: Clear label to ensure management
    • Designed by international ISO/IEC11801 and TIA/EIA5688.2

     

    Product name
    19’’ CAT6 UTP Patch panel

    Shielded
    NO

    Port
    48-port

    Unit
    2U

    IDC
    Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

    Contact pin
    Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

    Intermediate Resistance
    No more than 20m ohm in normal atmosphere pressure(not including bulk resistor)

    Insulated resistance
    No less than 1,00 OM ohm in normal atmosphere pressure

    The Intensity of anti-currency
    DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

    Air pressure
    70-106 Kpa

    Back wave loss
    ≧34dB (1≦f<100MHZ)

    Relative humidity
    85% (30℃)

    Min near end cros talk loss 100MHZ
    ≧43dB (100MHZ)

    Min far end cros talk loss 100MHZ
    ≧35.3dB (100MHZ)

    Operation temperature
    -20℃ to 60℃

    CAT6 U/UTP Patch Panel 48 Ports 2U

  • This EZ-RJ45 connector allows the technician to easily verify the proper wiring order, allowing the wires to be inserted through the connector and out the front.

    • Stable transmission
    • Environmentally friendly PC material
    • 3μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6 UTP EZ RJ45 Connector

    • Stable transmission
    • Environmentally friendly PC material
    • 3μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6 UTP JACK RJ45 Connector

  • Description

    • Stable transmission
    • Environmentally friendly PC material
    • 50μ gold plating on the contact pin ensures long life service
    • Wear-resistant and durable

    CAT6/CAT7 RJ45 FTP Connector for 22-23 AWG

    • Impendance: 75+/-3 Ohm
    • Capacity: 55+/-3 pF/m
    • Velocity ratio: 80 %
    • DC resistance (20 ºC) Conductor: 63,1 Ohm/km
      Outer shield: 40,6 Ohm/km
    • Attenuation (20 ºC): 5 MHz 2,62 dB/100 m
      50 MHz 8,40 dB/100 m
      200 MHz 16,87 dB/100 m
      470 MHz 25,97 dB/100 m
      500 MHz 26,80 dB/100 m
      862 MHz 35,32 dB/100 m
      1000 MHz 38,09 dB/100 m
    • Return loss at: 30-470 MHz dB >20
      470-862 MHz dB >23
      862-2150 MHz dB  >18
    • Screening efficiency: 5-10 MHz dB >70
      10-30 MHz dB >80
      30-1000 MHz dB >85

    CCTV Cable 1+2 Mini U4 2×0,50 500M

    • Impendance: 75+/-3 Ohm
    • Capacity: 55+/-3 pF/m
    • Velocity ratio: 80 %
    • DC resistance (20 ºC) Conductor: 63,1 Ohm/km
      Outer shield: 40,6 Ohm/km
    • Attenuation (20 ºC): 5 MHz 2,62 dB/100 m
      50 MHz 8,40 dB/100 m
      200 MHz 16,87 dB/100 m
      470 MHz 25,97 dB/100 m
      500 MHz 26,80 dB/100 m
      862 MHz 35,32 dB/100 m
      1000 MHz 38,09 dB/100 m
    • Return loss at: 30-470 MHz dB >20
      470-862 MHz dB >23
      862-2150 MHz dB  >18
    • Screening efficiency: 5-10 MHz dB >70
      10-30 MHz dB >80
      30-1000 MHz dB >85

    CCTV Cable 1+4 Mini U4 2×0,50 500M

  • Electric parameters:

    Impedance

    Ohm
    75+/-3

    Capacity

    pF/m
    54.5+/-3

    Velocity ratio

    %
    85

    DC resistance (20 ºC)
    Conductor
    Ohm/km
    35.5

    Outer shield
    Ohm/km
    31

    Attenuation (20 ºC)
    1 MHz
    db/100 m
    0.87

    5 MHz
    db/100 m
    1.98

    10 MHz
    db/100 m
    2.79

    50 MHz
    db/100 m
    6.25

    100 MHz
    db/100 m
    8.91

    200 MHz
    db/100 m
    12.9

    300 MHz
    db/100 m
    15.83

    470 MHz
    db/100 m
    19.41

    862 MHz
    db/100 m
    26.14

    1000 MHz
    db/100 m
    28.92

    1350 MHz
    db/100 m

    1750 MHz
    db/100 m

    2150 MHz
    db/100 m

    Return loss at
    30-470 MHz
    db
    >23

    470-862 MHz
    db
    >20

    682-2150 MHz
    db
    >18

    Screening efficiency
    5-10 MHz
    db
    >55

    10-30 MHz
    db
    >60

    30-1000 MHz
    db
    >65

    Construction:

    Material conductor

    Bare copper

    Diameter conductor
    mm
    0.8

    Material dielectric

    FHDPE

    Diameter dielectric
    mm
    3,7±0,15

    Typf of foil

    Al/Pet/Al

    Braiding material

    AM (aluminium)

    Braid coverage
    %
    67

    Power wires

    Copper (2 x 0,75 mm2)

    Outer jacket

    PVC

    Diameter sheath
    mm
    6.1/12.0

    Min. Setting radius
    mm
    35

    CCTV Cable RG59 1+2 2×0,75 outdoor 500m

  • Coaxial Cable RG6/U6 indoor 500m/100m

  • Electric parameters:

    Impendance

    Ohm
    75+/-2

    Capacity

    pF/m
    54,5+/-3

    Velocity ratio

    %
    85

    DC resistance (20 ºC)
    Conductor
    Ohm/km
    22,5

    Outer shield
    Ohm/km
    24,0

    Attenuation (20 ºC)
    1 MHz
    dB/100 m
    0,68

    5 MHz
    dB/100 m
    1,53

    10 MHz
    dB/100 m
    2,17

    50 MHz
    dB/100 m
    4,85

    100 MHz
    dB/100 m
    6,87

    200 MHz
    dB/100 m
    9,74

    300 MHz
    dB/100 m
    11,95

    470 MHz
    dB/100 m
    14,98

    862 MHz
    dB/100 m
    20,37

    1000 MHz
    dB/100 m
    21,97

    1350 MHz
    dB/100 m

    1750 MHz
    dB/100 m

    2150 MHz
    dB/100 m

    Return loss at
    30-470 MHz
    dB
    >23

    470-862 MHz
    dB
    >20

    862-2150 MHz dB
    dB
    >18

    Screening efficiency
    5-10 MHz dB
    dB
    >75

    10-30 MHz dB
    dB
    >85

    30-1000 MHz dB
    dB
    >90

     

    Construction:

    Material conductor

    Bare copper

    Diameter conductor
    Ø
    mm
    1,02

    Material dielectric

    FHDPE

    Diameter dielectric
    Ø
    mm
    4,3±0,15

    Type of foil

    Al/Pet/Al

    Braiding material

    Annealed tinned copper

    Braid coverage

    %
    60

    Power wires

    Copper (2 x 0,75 mm2)

    Outer jacket

    PVC

    Diameter sheath
    Ø
    mm
    6,8/15,6

    Min. Setting radius

    mm
    50

    Coaxial Cable RG6/U6 Outdoor

  • Rating
    220V-240V,22/23W

    Current
    0.14A

    RPM
    2800/3000R/MIN

    Size
    120X120X38MM

    Noise
    48/50dB-A

    Hz
    50/60Hz

    Material:
    Frame: metal

    fan blade: PPT plastic

    Wire: copper

    Cooling Fan 220V

  • The horizontal cable management can be used with all patch panels, rack and cabinet mount products. It mounts on standard 19″ racks

    or cabinets and provided a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.

    Covered Cable Organizer 12 Port

  • The horizontal cable management can be used with all patch panels, rack and cabinet mount products. It mounts on standard 19″ racks

    or cabinets and provided a clean, beautiful and simple means of organizing from small to large bundles of cables and patch cord.

    Covered Cable Organizer 24 Port

  • Big scan window

    Strong decoding capacity

    Quickly identify various barcodes

     

    Features

    • Support USB, RS-232 interface
    • Suitable for POS terminals, ticket validators
    • Wide field-of-view, omni-directional scanning capability
    • Hight speed and reliable performance on common codes
    • Compatible with Linux, Android, Windows XP/7/8/10/MAC OS

    DS-652SU Desktop Scanner

  • Fiber Optic Cable 50/125 outdoor Multi Mode

  • Technical characteristics

    1) The unique extruding technology provides the fibers in the tube with good flexibility and bending endurance

    2) The unique fiber excess length control method provides the cable with excellent mechanical and environmental properties Multiple water blocking material filling provides dual water blocking function

    Construction:

    1. Fiber single mode G652D
    2. Gel core filling
    3. Center strength member FRP
    4. Multi Loose tube
    5. Fastening winding of threads and tapes.
    6. 0MM*7pcs Stranded galvanize messenger wire
    7. MDPE sheath

     

    Fiber count
    12
    24
    48
    96

    No of loose tube/filler
    2/3
    4/1
    6
    8

    Fiber No. per tube
    6
    6
    8
    12

    Loose tube diameter
    1.6±0.1mm

    Center strength member
    Steel wire 1.6±0.1mm

    Outer sheath thickness
    1.5±0.1mm

    Messenger wire
    1.0MM*7pcs galvanized steel

    Water proof type
    Gel filled

    Outer sheath material
    MDPE

    Cable OD mm
    8.0*15.0MM±0.2mm

    Cable weight
    110KG/KM

    Tensile
    4KN

    Operation temperature range
    -40 ℃ to + 70 ℃

    Installation temperature range
    -40 ℃ to + 70 ℃

    Transport and storage temperature range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Aerial 9/125 outdoor multi tube

  • Fiber count
    2
    4
    6
    8

    Max. No of loose tube
    1

    Fiber No. per tube
    2
    4
    6
    8

    Loose tube diameter
    2.0±0.1mm

    Outer sheath thickness
    1.6±0.1mm

    Messenger wire
    1.0MM*7pcs galvanized steel

    Outer sheath material
    HDPE

    Cable OD mm
    10.6-11MM *5.0-5.2MM

    Cable weight
    66KG/KM

    Tensile
    3KN

    Operation temperature range
    -40 d℃ to + 70 ℃

    Installation temperature range
    -40 ℃ to + 70 ℃

    Transport and storage temperature

    range
    -40 ℃ to + 70 ℃

    Crush resistance
    1000 N/10cm

    Minimal installation bending radius
    20 x OD

    Minimal operation bending radius
    10 x OD

    Fiber Optic Cable Aerial 9/125 outdoor Uni-tube