Shop

Default sorting
Show
16

  • Applications

    Gigabit Ethernet
    Fiber Channel
    Switch to Switch interface
    Switched backplane applications
    Router/Server interface
    Other optical transmission systems

     

    The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of
    1.25Gbps/1.0625Gbps and 20km transmission distance with SMF.

    The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a
    trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety
    requirements.

    The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further
    information, please refer to SFP MSA.

    SFP Module 1,25G Duplex Core 20KM

  • Applications

    Gigabit Ethernet
    Fiber Channel
    Switch to Switch interface
    Switched backplane applications
    Router/Server interface
    Other optical transmission systems

     

    The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of
    1.25Gbps/1.0625Gbps and 40km transmission distance with SMF.

    The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a
    trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety
    requirements.

    The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further
    information, please refer to SFP MSA.

    SFP Module 1,25G Duplex Core 40KM

  • Applications

    • Gigabit Ethernet
    • Fiber Channel
    • Switch to Switch interface
    • Switched backplane applications
    • Router/Server interface
    • Other optical transmission systems

     

    Features

    • Dual data-rate of 1.25Gbps/1.063Gbps operation
    • 1550nm DFB laser and PIN photodetector for 100km transmission
    • Compliant with SFP MSA and SFF-8472 with simplex LC receptacle
    • Digital Diagnostic Monitoring: Internal Calibration or External Calibration
    • Compatible with RoHS
    • +3.3V single power supply
    • Operating case temperature: Standard: 0 to +70°C

    SFP Module 1,25G Single Core A B 100KM

  • Applications:

    • Gigabit Ethernet
    • Fiber Channel
    • Switch to Switch interface
    • Switched backplane applications
    • Router/Server interface
    • Other optical transmission systems

    SFP Module 1,25G Single Core A B 20KM

  • Applications:

    • Gigabit Ethernet
    • Fiber Channel
    • Switch to Switch interface
    • Switched backplane applications
    • Router/Server interface
    • Other optical transmission systems

    SFP Module 1,25G Single Core A B 40KM

  • Applications:

    • 10GBASE-LR/LW 10G Ethernet
    • 1200-SM-LL-L 10G Fibre Channel
    • 10G SONET
    • Other optical links

    SFP Module 10G Single Core A B 20KM

  • The SHTURMANN SFP SWITCH is an Ethernet Fiber Switch which is specially designed for network monitoring. It has eight 10/100/1000Mbps Ethernet ports and two 1.25Gbps fiber ports. It adopts Realtek chips to ensure low power consumption and high stability. It extends the transmission distance of a network from 100m to 120km via copper cables. It can extend the transmission distance, and also have many other advantages such as isolation protection, good data security, working stability and easy maintenance. The excellent performance protects the communication equipment from lightning, surge and EMI in bad weather.

    SFP Switch SH-SG008F 8 Port Gigabit with 2*RJ45 uplink SLT

  • SFP-T Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

     

    Applications
    1.25 Gigabit Ethernet over Cat 5 cable

    SFP to RJ451000based- T RJ45 100m

    • Tunnel dimensions 500 (Width) * 300 (Height) mm
    • Inspection speed: 22 cm / s
    • Maximum load capacity: 100kg
    • Differentiation: <0.101mm metal wire
    • Conductivity (guaranteed): 8mm steel, normally 10mm
    • Monitor 19”
    • Pseudocolor Image

    SH-5030A X-Ray Scanner

    • Wall mount type
    • ABS casing
    • ABS crust
    • White color
    • Driver size: 4″
    • Tweeter size: 1.5″
    • Power Taps @100V: 10W
    • Frequency response 170‐18000Khz
    • Mounting type: bracket
    • Mounting position: vertical, horizontal
    • Cable connection type – socket
    • Dimensions (WxDxH): W:160x140x220

    SH-KD415PA Loudspeaker

    • Wall mount type
    • ABS casing
    • ABS crust
    • Black color
    • Driver size: 4″
    • Tweeter size: 1.5″
    • Power Taps @100V: 10W
    • Frequency response 170‐18000Khz
    • Mounting type: bracket
    • Mounting position: vertical, horizontal
    • Cable connection type – socket
    • Dimensions (WxDxH): W:160x140x220

    SH-KD415PQ Loudspeaker

  • SH-MIC1 Microphone

    • Power on/off button
    • Capsule type: Condenser
    • Frequency response: 40Hz~16Khz
    • Pattern: Ultra‐cardioid
    • Output impedance: 200 Ohm
    • Reference sound receiving distance 20~50sm
    • Balanced output
    • DC 9V

    SH-MIC1CM Microphone

  • SH-MIC5Z Microphone

    • 8 channels XLR/TRS input
    • 48V Phantom POWER
    • 3 section EQ for each channels
    • USB input
    • Built‐in 16 effects
    • Built‐in 5 section EQ
    • Built‐in Power supply
    • BlueTooth
    • Bulit‐in power amplifier of 2*250W@8ohm 2*300W@4ohm

    SH-MX8 Mixer

    • Case: Black color, aluminium case
    • Functions: USB, SD card, Bluetooth
    • Features: Chime
    • Mic input: x1
    • Mic 1 Priority: Yes
    • AUX input: x2
    • Line output: x1
    • Adjustment: Zones independed volume control, MIC 1, MIC 2, AUX 1, AUX 2, MP3 (USB, Bluetooth), Bass, Treble
    • Zone(s): 5 | Output types: 4‐16Ω / 70V / 100V
    • Max. output power: 130W
    • Safety: Output Short Circuit, Overheat, Overload protection
    • Rackmount design: Yes
    • Power consumption: AC 220V‐240V/50Hz‐60Hz
    • Dimensions: 484*343*88mm

    SH-SG130W Mixer