Specification:

• Stable Transmission
• 100% pass fluke test
• Triple Protection of Patch Cables: RJ45 modular plug, PVC Jacket and strain relief boot to increase the service life of the cable.
• Spine-Leaf Architecture Achieve Larger Network Scale: to prevent network bottlenecks, reduce network latency, and expanding bandwidth and scalability for future network expansion.
• Widely Used in Equipment with RJ45 Ports: this cable is suitable for all devices with RJ45 jacks, such as PCs, servers, printers, routers, switches, media players, NAS, VoIP phones, PoE devices, and more.
• Provide cost-effective copper cable solutions for major corporations, medium-sized and small enterprises data centers.

CAT6 FTP Patch Cord

Catagory
CAT6

Shieled
YES

Conductor Material
Stranded Bare Copper

Cable AWG
26

Construction(±0.01mm)
7/0.16

Connector
8P8C FTP plug; 3μm gold plating

Insulation
Material
PE

Nom. Thickness(mm)
0.21

Diameter(±0.05mm)
0.9

Jacket
Material
PVC

Nom. Thickness(mm)
0.55

Diameter(±0.30mm)
6

Color
Light gray

ELECTRICAL TEST
100% OPEN,SHORT & MISS WIRE TEST

CONDUCTOR RESISTANCE
3~10 OHMS MAX.

INSULATOR RESISTANCE
5M OHMS MIN.

HI-POT
DC 300V 0.01sec

Length
0.5M/1M/2M(or customized lenghth)

Specification:

• With CAT6 keystone modules, for 19″cabinet
• Complete metalation and reed
• Modularization design
• Ant-burn performance, meeting the International standard
• Label: Clear label to ensure management
• Designed by international ISO/IEC11801 and TIA/EIA5688.2

Product name
19’’ CAT6 UTP Patch panel

Shielded
NO

Port
24-port

Unit
1U

IDC
Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

Contact pin
Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

Intermediate Resistance
No more than 20m ohm in normal atmosphere pressure (not including bulk resistor)

Insulated resistance
No less than 1,00 OM ohm in normal atmosphere pressure

The Intensity of anti-currency
DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

Air pressure
70-106 Kpa

Back wave loss
≧34dB (1≦f<100MHZ)

Relative humidity
85% (30℃)

Min near end cros talk loss 100MHZ
≧43dB (100MHZ)

Min far end cros talk loss 100MHZ
≧35.3dB (100MHZ)

Operation temperature
-20℃ to 60℃

Specification:

• With CAT6 keystone modules, for 19″cabinet
• Complete metalation and reed
• Modularization design
• Ant-burn performance, meeting the International standard
• Label: Clear label to ensure management
• Designed by international ISO/IEC11801 and TIA/EIA5688.2

Product name
19’’ CAT6 UTP Patch panel

Shielded
NO

Port
48-port

Unit
2U

IDC
Phosphor bronze and silver plating (20- 50uinch), suitable diameter 0.4-0.6mm Durability: 200 cycles

Contact pin
Phosphor bronze with 3 micro-inch gold plating Mating durability: not less than 750 cycles

Intermediate Resistance
No more than 20m ohm in normal atmosphere pressure(not including bulk resistor)

Insulated resistance
No less than 1,00 OM ohm in normal atmosphere pressure

The Intensity of anti-currency
DC 1,000V (AC,700V), No puncture and flash-over phenomenon In one minute. Accord with Industry standard

Air pressure
70-106 Kpa

Back wave loss
≧34dB (1≦f<100MHZ)

Relative humidity
85% (30℃)

Min near end cros talk loss 100MHZ
≧43dB (100MHZ)

Min far end cros talk loss 100MHZ
≧35.3dB (100MHZ)

Operation temperature
-20℃ to 60℃