LAN Cable CAT 5 F/UTP 2x2x24 AWG outdoor
DESIGN
- Conductor: soft copper Diameter: 0,51 mm (±0,005 mm)
- Insulation: PE . Conductor diameter: 1,03 mm
- Pair: two conductors twisted together. Color identification of pairs: white-blue / blue and white – orange / orange
- Core wrapping
- Copper tinned contact wire Ø 0,4 mm is applied between the sheath and shield.
- Core shield: aluminum polymer foil (metal inside)
- Sheath: PE, nominal cable diameter: 6,0 mm, color: black
APPLICATION
PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s,
100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s,
Gigabit Ethernet (1000BASE-T), Firewire 100 Mbit/s, ATM LAN 1,2 Gbit/s
СOMPLIANCE WITH THE REQUIREMENTS
ISO/IEC 11801:2002, EN 50173-1:2002, ANSI/TIA/EIA-568-B.2-1-2002, IEC 61156-5:2002, TU U 31.3-05758730-020-2002
MECHANICAL CHARACTERISTICS
Тemperature range:
During installation -10 °C … +60 °C
After installation -50 °C … +60 °C
Bending radius:
During installation ≥ 8 cable diameters After installation ≥ 4 cable diameters
Tensile stress ≤ 85 N
ELECTRICAL CHARACTERISTICS AT 20 °C
| Parameter | Unit | Value |
| Capacitance | pF/m | ≤ 56 |
| Direct current resistance | Оhm/km | ≤ 100 |
| Insulation resistance | GOhm/km | ≥ 5 |
| Resistance unbalance | % | 2 |
| Signal propagation velocity | s | 0,65 |
| Characteristic impedance in the frequency range of: | Ohm | 100±15 |
| Test voltage between cores, (DC, 2 s) | kV | 2,5 |
| Frequency, MHz | 1 | 4 | 10 | 16 | 20 |
| Attenuation, dB, max | 2,1 | 4,1 | 6,5 | 8,3 | 9,3 |
| NEXT, dB, min | 65,3 | 56,2 | 50,3 | 47,2 | 45,7 |
| PS NEXT, dB, min | 62,3 | 53,2 | 47,3 | 44,2 | 42,7 |
| ELFEXT, dB, min | 64 | 51,9 | 44 | 39,9 | 37,9 |
| PS ELFEXT, dB, min | 61 | 48,9 | 41 | 36,9 | 34,9 |
| RL, dB, min | 20 | 23 | 25 | 25 | 25 |
| Frequency, MHz | 31,25 | 62,5 | 100 |
| Attenuation, dB, max | 11,7 | 17,0 | 22,0 |
| NEXT, dB, min | 42,8 | 38,3 | 35,3 |
| PS NEXT, dB, min | 39,8 | 35,3 | 32,3 |
| ELFEXT, dB, min | 34,1 | 28 | 24 |
| PS ELFEXT, dB, min | 31,1 | 25 | 21 |
| RL, dB, min | 23,6 | 21,5 | 20,1 |
IEC 61156-5, values lower than 4 MHz are given for information only
